Models > CVGX2423B18 > Instructions

CVGX2423B18 Jenn-Air Cooktop - Instructions

Jump to:

All Instructions for the CVGX2423B18
31 - 36 of 36
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
ALAN from Encinitas, CA
Parts Used:
WP7403P876-60
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Wrench (Adjustable)
The fan switch on the Jenn-Air downdraft cooktop was bad and needed to be replaced
Be sure to unplug the unit first. Removing the screws to the control panel, disconnecting the wires, and replacing the switch is the easy part. The threads are plastic where the nut holds the switch in place, and it would not stay tight, but popped loose because of the plastic threads. I added some super glue to the threads and hand tightened. Replace control panel cover, re-plug into outlet.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Kathy from Gurnee, IL
Parts Used:
WPY706012
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Our old grease filter was molding
Took the old filter out and put a new one in. No tools no fuss no muss. Very easy.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the CVGX2423B18
31 - 36 of 36