CVGX2423B18 Jenn-Air Cooktop - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Tracy from Albany, GA
- Parts Used:
- Y706005
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Scratched up grill on stove top
Just needed to replace a scratched up grill on my stove top. The black paint was scratched off and looked horrible. You site made it very easy to find what I needed and it got here in two days. If I had known it was going to be that quick and easy, I would've done it a long time ago! Thanks!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- James from CANTON, GA
- Parts Used:
- WP7403P876-60
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Wrench set
The switch worke fine but the threads was not the same as the old switch so I had to order a 3/8-32 but.
Remove the knobs then remove the four screws holding the trim remove the two sheet metal screws then lift the unit up and out of the cook top remove the nut from the old fan switch remove the two wires from the switch install the new switch put the wires back on the new switch then place the assembly back in the stove top insert and fasten the two sheet metal screws install the trim and knobs and your done. Note : check the nut before hand to see if it is the same as the old one there was no new nut with the new switch so I had to buy one.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Conrad from Roswell, GA
- Parts Used:
- WP7403P876-60
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers, Wrench set
fan wouldn't turn off
Removed the part that didn't work and replaced it with the new one
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- alphonso from plainfield, IL
- Parts Used:
- WP71003558
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers, Socket set, Wrench set
blower motor was making loud noise
removed motor, saw that stablizers were broke and went to a local parts supply shop called SUNDBERG and was given a price of about 49.00 for three stablizers. at that point i went to the internet and found PARTSELECT.COM were i found the same parts for a fraction of the price,17.00, i could not believe it! SUNDBERG customer service was horrible.PARTSELECT custormer service is great and was just over the internet,any how the repair is done no more loud noise and wife is happy again ,for awhile.thanks keep up the good work.i tell everybody about you guys.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- rick from Edinburg, TX
- Parts Used:
- 71002785
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver
change out NG orifice with LP orifice
Used 5/16 nut driver with 2 sided tape in the inside. Removed old orifice from tape and stuck new one to tape and installed it. Did the same for rest of them.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Carolyn from Cressey, CA
- Parts Used:
- WP7403P876-60
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
I knocked the knob off the fan control and the stem of the control broke, too.
First I removed 3 screws that held a plate againt the wires. Then pulled the element out about 3 inches and disconnected the 2 wires holding the old element and connected them to the new element. Replaced the plate with 3 screws and I was done.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Elsie from OLATHE, KS
- Parts Used:
- WPY706012
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Old filter was falling apart
Just placed new filter in slot
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Judith A. from Elizabeth, IL
- Parts Used:
- WP7103P178-60, 7507P241-60
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Socket set
Treads on holder were stripped
Needed to remove all 4 burners to repair
one, but it went without a hitch.
Thanks to your exacting and clear diagrams, we were able to locate the correct parts
We called JennAire, but they were unable to
find the part..
It was delivered in a timely fashion and
we were able to finish the job in about
3 hours. thanks
one, but it went without a hitch.
Thanks to your exacting and clear diagrams, we were able to locate the correct parts
We called JennAire, but they were unable to
find the part..
It was delivered in a timely fashion and
we were able to finish the job in about
3 hours. thanks
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Daniel from Mullica Hill, NJ
- Parts Used:
- Y706005
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Bashed Air Grill
Took the old one out, plopped the new one in.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Robert from Pleasanton, CA
- Parts Used:
- WP7432P109-60
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Screw drivers, Wrench set
As soon as the parts arived it tooks only 1 1/2 hours to get everything fixed
took the nuts off &replaced the new ignited
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Rita from Leesburg, VA
- Parts Used:
- WPY706012
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
replace old grease filter
very easy slip in
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kim from Cottontown, TN
- Parts Used:
- WPY706012
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
Nasty, clogged, old grease filter
I carefully removed the disgusting old filter and took straight to trash. I then used my wet/dry vacuum to clean the rest of the loose debris from the area where the filter area is located. I used a clean, dry cloth to wipe the remainder of the material away and then carefully lowered the clean new filter down into it's new home. So easy, it took longer to type out these directions :)
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- ned from leland, MS
- Parts Used:
- WPW10475147
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver
would not light
remove two screws then unplug the wires put the wires back on the new one
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- ALAN from Encinitas, CA
- Parts Used:
- WP7403P876-60
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers, Wrench (Adjustable)
The fan switch on the Jenn-Air downdraft cooktop was bad and needed to be replaced
Be sure to unplug the unit first. Removing the screws to the control panel, disconnecting the wires, and replacing the switch is the easy part. The threads are plastic where the nut holds the switch in place, and it would not stay tight, but popped loose because of the plastic threads. I added some super glue to the threads and hand tightened. Replace control panel cover, re-plug into outlet.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kathy from Gurnee, IL
- Parts Used:
- WPY706012
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Our old grease filter was molding
Took the old filter out and put a new one in. No tools no fuss no muss. Very easy.
Was this instruction helpful to you?
Thank you for voting!