Models > JED8430ADB > Instructions

JED8430ADB Jenn-Air Cooktop - Instructions

Jump to:

All Instructions for the JED8430ADB
61 - 75 of 110
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Robert from Northville, MI
Parts Used:
WP7739P122-60
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
sticking/broken pop up knob
I used needle nose pliers to remove the broken piece then pushed the new knob on!!
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
John from Austin, TX
Parts Used:
WP74009592
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Burner knob cracked
This company sent the new part in less than 4 days. Thanks!!!
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
alphonso from plainfield, IL
Parts Used:
WP71003558
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Socket set, Wrench set
blower motor was making loud noise
removed motor, saw that stablizers were broke and went to a local parts supply shop called SUNDBERG and was given a price of about 49.00 for three stablizers. at that point i went to the internet and found PARTSELECT.COM were i found the same parts for a fraction of the price,17.00, i could not believe it! SUNDBERG customer service was horrible.PARTSELECT custormer service is great and was just over the internet,any how the repair is done no more loud noise and wife is happy again ,for awhile.thanks keep up the good work.i tell everybody about you guys.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
David from Mary Esther, FL
Parts Used:
W10823704
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
element or temperature sensor failed: not working
Removed unit from counter, removed 14 screws holding glass top to frame, removed ceramic element, swapped over mounting brackets to new element, checked wireing as per instruction sheet (direct replacement) connected wires, re-installed glass top to frame and placed back into counter. ops check good.
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robert from High Springs, FL
Parts Used:
12002125
Difficulty Level:
Very Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Screw drivers
control failed
Couldn't hook up the wires since the instructions were so cryptic. Ended up fixing old control and re-installed it. Worked fine.
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Roberto from Zapata, TX
Parts Used:
71003476
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Screw drivers, Wrench set
Fan not working
Opened the top section of the stove. Re-routed wires to be connected from the speed control device into the new cord. And done. Put everything back thogether.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Kim from Cottontown, TN
Parts Used:
WPY706012
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Nasty, clogged, old grease filter
I carefully removed the disgusting old filter and took straight to trash. I then used my wet/dry vacuum to clean the rest of the loose debris from the area where the filter area is located. I used a clean, dry cloth to wipe the remainder of the material away and then carefully lowered the clean new filter down into it's new home. So easy, it took longer to type out these directions :)
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
bill from Cupertino, CA
Parts Used:
WP74009592
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
broken knob ...
by hand, pushed on the knob ...
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Dolores from Roseville, CA
Parts Used:
WP74009592
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
knob cracked when touched by hot pan
pulled damaged knob off and inserted new knob
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Rita from Leesburg, VA
Parts Used:
WPY706012
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
replace old grease filter
very easy slip in
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Dwayne from Holland, MI
Parts Used:
WP74009592
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Surface knob was slightly melted.
Knob that I ordered fit perfectly. I ordered the knob at 11:00 A.M. one day and received it less than 24 hours later. Awesome.
0 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Cyril from Cincinnati, OH
Parts Used:
WP7739P122-60
Difficulty Level:
A Bit Difficult
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Fan Knob didn't operate fan or retract
Part is a new design. Had to remove all the housing for the old knob. Don't leave anything in the hole. A bit apprehensive, but it works great.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Raymond from Soddy Daisy, TN
Parts Used:
WP7739P122-60
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Fan knob would not pop up as designed.
Removed old knob by pulling straight up. The shaft the knob fits on is D shaped. Simple align knob with D on shaft and push down. Problem solved.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Gary from Bend, OR
Parts Used:
12002125
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
The dual surface burner would come on and go off intermittently when the switch was turned to off.
Thanks to the highest rated user comment and following his instructions the switch exchange was easy. The supplied instructions were of little to no help and confusing. The hardest part was getting to the two side top Phillips screws because the granite counter top was in the way necessitating raising the stove till the screw heads were exposed. Once raised the front cover was easily removed after undoing six screws. The cook top did not need to be removed. Either of the supplied wires would work and only one of the two was needed. The replacement switch performed far better than the original.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Kathy from Gurnee, IL
Parts Used:
WPY706012
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Our old grease filter was molding
Took the old filter out and put a new one in. No tools no fuss no muss. Very easy.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the JED8430ADB
61 - 75 of 110