JED8430BDN Jenn-Air Cooktop - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Carlos from CHANTILLY, VA
- Parts Used:
- WPY706012
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Grease filter broke
Ordered a replacement grease filter.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Sheila from JUNO BEACH, FL
- Parts Used:
- WPY706012
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
the filter screen was worn out and needed tp be replaced.
I merely lifted the downdraft cover and inserted the new screen as
directed. THANK YOU FOR YOUR PROMPT RESPONSE TO MY ORDER.
directed. THANK YOU FOR YOUR PROMPT RESPONSE TO MY ORDER.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joe from Easton, MO
- Parts Used:
- WP74008248
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Pliers, Screw drivers
duel burner operated on high only
Disconnected fan from vent and raised cook top and rotated one quarter turn to rest on counter top so I could remove screws with 1/4 inch nutdriver in oder to lift cook surface from unit, then install new switch and reassemble in reverse order. Work perfectly!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- alphonso from plainfield, IL
- Parts Used:
- WP71003558
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers, Socket set, Wrench set
blower motor was making loud noise
removed motor, saw that stablizers were broke and went to a local parts supply shop called SUNDBERG and was given a price of about 49.00 for three stablizers. at that point i went to the internet and found PARTSELECT.COM were i found the same parts for a fraction of the price,17.00, i could not believe it! SUNDBERG customer service was horrible.PARTSELECT custormer service is great and was just over the internet,any how the repair is done no more loud noise and wife is happy again ,for awhile.thanks keep up the good work.i tell everybody about you guys.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Elsie from OLATHE, KS
- Parts Used:
- WPY706012
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Old filter was falling apart
Just placed new filter in slot
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Rita from Leesburg, VA
- Parts Used:
- WPY706012
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
replace old grease filter
very easy slip in
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Roberto from Zapata, TX
- Parts Used:
- 71003476
- Difficulty Level:
- Easy
- Total Repair Time:
- 1- 2 hours
- Tools:
- Screw drivers, Wrench set
Fan not working
Opened the top section of the stove. Re-routed wires to be connected from the speed control device into the new cord. And done. Put everything back thogether.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- jim from dallas, TX
- Parts Used:
- 74004918
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
air grill was broken
threw away the old one and put in the new one, but the reason that i wanted to respond is this website is incredible. its easy to use, very well designed, has reasonable prices, and the part arrived in two days. it took me a total of 20 minutes to find the right part on the website, order it, and install it. i will never go to a retail store for replacement parts again!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from San Antonio, TX
- Parts Used:
- W11088181
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Screw drivers, Socket set
Surface Burner Short
Removed the cook top from the counter. Removed the switch housing and then the switch. Found a match and ordered. Part came in 2 business days. Once I put together the housing and connected the wire housing the burner worked perfect. The downdraft fan remained on. Placed a call to Jenn Air service and was asked to disconnect the fan switch. There must be some memory in the solid state portion of the switch. After a few mins I replaced the fan switch and hooked up the wiring. All worked fine.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Eddie from Loyall, KY
- Parts Used:
- W11088181
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Water boiled over burnt out switch
Knocked breaker removed stove top from iland removed a dozen screws replaced switch put screws back in installed top back in iland put breaker back in worked purfect.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- larry from houston, TX
- Parts Used:
- W11088181
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Pliers
burner switch broken
turned off power to stove top..lifted unit out unscrewed top and switch had 2 screws re-placed switch and put back together.. make easy $100 plus switch
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kathy from Gurnee, IL
- Parts Used:
- WPY706012
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Our old grease filter was molding
Took the old filter out and put a new one in. No tools no fuss no muss. Very easy.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Judith from Lady Lake, AL
- Parts Used:
- WPY706012
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Needed new grease filter
The old grease filter was removed and the entire downdraft was cleaned. The new filter was slipped in. It is so nice to have the old one out. I am so appreciative of finding this part. :-)
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jeff from Houston, TX
- Parts Used:
- W11088181
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- More than 2 hours
- Tools:
- Screw drivers, Socket set
1 burner wouldn't work, and caused the breaker to trip
I removed the glass top and replaced the switch unit successfully. Hardest part was removing the unit from the countertop and bracing the base with a 4x4.
Was this instruction helpful to you?
Thank you for voting!