KSB5WW4 KitchenAid Blender - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Robert from Naples, FL
- Parts Used:
- WP9704230
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
blender coupler was worn down
Using the precise instructions provided by parts select, I used a big screw driver and pried off the old coupler and cleaned the area and screwed on the new coupler. Fixed!
The part finally arrived 3 weeks later, after being out of stock and back ordered a couple times.
The part finally arrived 3 weeks later, after being out of stock and back ordered a couple times.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Carol N from Northford, CT
- Parts Used:
- WP9704230
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
coupler crumbled
Thanks to everyone before me and their stories!
I felt confident enough to try repairing my blender myself ! ! !
I just placed a flat head screw driver under the coupler and pushed up on the screw driver, 3 or 4 more times around the coupler. It broke away and a metal disc was left, which I unscrewed and I just screwed the new coupler on.
Thanks Again!
I felt confident enough to try repairing my blender myself ! ! !
I just placed a flat head screw driver under the coupler and pushed up on the screw driver, 3 or 4 more times around the coupler. It broke away and a metal disc was left, which I unscrewed and I just screwed the new coupler on.
Thanks Again!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Brent from Austin, TX
- Parts Used:
- WP9704230
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Teeth on the drive coupler worn completely off
Followed the directions and used a screwdriver to pry off the old gear. Screwed the new one on - reverse thread. Easy as that.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- jeffrey from Bessemer City, NC
- Parts Used:
- WP9704230
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
broken base coupling on blender
used thin wire strippers to hold screw shat, than unscrewed one and screwed on the other. done
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Brian from Glen Ridge, NJ
- Parts Used:
- WP9704230
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
The drive coupling wore out
I unscrewed the old coupling and screwed on the new coupling from Partselect.
This was a personal repair job.
However, I am a local Handyman in Northern NJ that does a ton of minor repairs. For all of my appliance part needs I will buy from Partselect.com. They under promised and over delivered! Just incase you dont know what I mean by that statement,,, I ordered the blender part, they told me I would have it in 6-10 days (which was acceptable to me) and I had it in two days... AWESOME job FOLKS!!!!!!!
This was a personal repair job.
However, I am a local Handyman in Northern NJ that does a ton of minor repairs. For all of my appliance part needs I will buy from Partselect.com. They under promised and over delivered! Just incase you dont know what I mean by that statement,,, I ordered the blender part, they told me I would have it in 6-10 days (which was acceptable to me) and I had it in two days... AWESOME job FOLKS!!!!!!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- PAUL from LAWRENCE, KS
- Parts Used:
- WP9704291
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Blades On Blender Locked Up
Piece of cake. Part was expensive and shipping likewise. Very fast
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Irene from LAGRANGE, IN
- Parts Used:
- WP9704230
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
My blender I bought at an estate sale needed a new drive coupling.
I used a straight edge screwdriver. At first my husband and I were afraid to much too much force behind the old coupling, but I figured it's no good the way it was so used more force and "pop" it came off. Then installed the new one and I love my blender!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Tom from Phoeniox, AZ
- Parts Used:
- WP9704230
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Teeth on rubber coupling were broken off.
Just like the directions said, I pryed up on the coupling at a few points around it's circumference and it became loose enough to unscrew. I didn't believe it was going to work at first but, amazingly, it did. All that was left to do was screw on the new part. No problem!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- kathy from fox island, WA
- Parts Used:
- WP9704230
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The part broke and the blender wouldn't operate correctly. ctlly.
After I discovered that it needed to be screwed on turning to the left it was simple.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Elliott from Surprise, AZ
- Parts Used:
- WP9704230
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Coupling worn out
Simply followed the online video instructions. Screwdriver to remove the worn out part. Rag to clean threads. Hand tighten replacement part (reverse threads). Blender fully functional. Couldn't have been easier.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Brenda from Lindsey, OH
- Parts Used:
- WP9704230
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
drive coupler was chewed up from improperly placing blender on it.
place screwdriver under old coupler and pried up on it in different spots until it popped off. Took less than 5 min. to do.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Thomasine from WAYNE, NJ
- Parts Used:
- WP9704230
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
The original drive coupling disintegrated
I repaired it as per instructions provided by using a flat head screwdriver to pry the original off.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- prasad from cave junction, OR
- Parts Used:
- WP9704230
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
worn drive coupling
Pry off the old, clean up drive threads, thread on the new one. easy as pie
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Tom from West Palm Beach, FL
- Parts Used:
- WP9704230
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
The drive wheel had worn teeth
The replacement part arrived so swiftly I didn't know what it was until I opened the packet.
The motor drive shaft has two flanges on it that can accept a narrow wrench and the drive wheel can be screwed off clockwise!
Alternatively the drive wheel can be easily prised off and the drive wheel screwed on anti-clockwise thread.
Success
Of course if the drive wheel was made of a more durable material this would not have been a problem unfortunately typically american not made to last!
The motor drive shaft has two flanges on it that can accept a narrow wrench and the drive wheel can be screwed off clockwise!
Alternatively the drive wheel can be easily prised off and the drive wheel screwed on anti-clockwise thread.
Success
Of course if the drive wheel was made of a more durable material this would not have been a problem unfortunately typically american not made to last!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Chris from hawthorne, CA
- Parts Used:
- WP9704230
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
coupler wore out
i used the screwdriver method prying up on side to side old one comes off new one goes on pretty cool also it was a nice long flat head with pretty big head
Was this instruction helpful to you?
Thank you for voting!