Models
>
KSB5WW4
KSB5WW4 KitchenAid Blender
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for KSB5WW4
Viewing 2 of 2Manuals & Guides for KSB5WW4
Click to downloadKeep searches simple, eg. "belt" or "pump".
$9.43
This genuine OEM drive coupling is used in your blender and attaches to the motor shaft in order to spin the blades. If your old coupling has become stripped or the teeth have cracked off, it should b...
In Stock
Order within the next 5 hrs and your part ships today!
In Stock
Order within the next 5 hrs and your part ships today!
$88.90
This is a replacement dome and blade assembly for your blender. This part connects to the bottom of the blender, and contains the blade. When the blender is running, the blade will rotate to chop any ...
In Stock
Order within the next 5 hrs and your part ships today!
In Stock
Order within the next 5 hrs and your part ships today!
In Stock
Order within the next 5 hrs and your part ships today!
Special Order
Special Order
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for KSB5WW4
Viewing 2 of 2Touchpad does not respond
Fixed by these parts
How to fix it
Door won’t open or close
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- STEPHEN from PITTSBORO, IN
- Parts Used:
- WP9704230
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Coupling teeth gone.
First I inserted a small diameter rod in the motor fins to keep the motor from turning. Then I simply loosened the coupling. (Please know this is a left-hand thread). The coupling was not that tight. New coupling only requires a snug hand -tightening. You are are good to go!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Richard from Naperville, IL
- Parts Used:
- WP9704230
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
1/2 of the teeth broke off of the blender drive coupling
My first step in repairing the broken KitchenAid blender, was to politely inform my wife HOW & WHY the blender broke in the first place. She thanked me for that, so she would know for the future. (whew...)
Replacing the drive tooth wheel was a cinch. We who are reading this are all fortunate to have others, before us, fill us in on t ... Read more he details. I'm glad I read previous testimonials instead of banking on KitchenAid's instructions. Although the motor shaft is a left-hand threaded mount, the mfg's instructions said to remove the defective coupler by prying the wheel off in various positions with a 1/2" screwdriver!! Reading previous repair stories here, proved to be more reliable.
It took more time for me to find a tool to aid in the removal of the old part, than it was to replace the part itself. I needed to find something that was thin enough to fit around the motor shaft and hold it from turning while I unscrewed the defective coupler in a "clockwise" direction. I eventually found a small, old pair of adjustable wire strippers. I was able to wiggle them in and barely grab the motor shaft. I turned the coupling clockwise and it came right off. No problem at all. Turns out that all that was probably needed was to insert a small punch between the motor fan blades through the bottom of the unit just to keep the motor from turning. The new fitting doesn't have to be on any more than hand tight, as the blender runs in a clockwise rotation, and will keep the fitting snug all the time.
Good luck, home mechanics.
Replacing the drive tooth wheel was a cinch. We who are reading this are all fortunate to have others, before us, fill us in on t ... Read more he details. I'm glad I read previous testimonials instead of banking on KitchenAid's instructions. Although the motor shaft is a left-hand threaded mount, the mfg's instructions said to remove the defective coupler by prying the wheel off in various positions with a 1/2" screwdriver!! Reading previous repair stories here, proved to be more reliable.
It took more time for me to find a tool to aid in the removal of the old part, than it was to replace the part itself. I needed to find something that was thin enough to fit around the motor shaft and hold it from turning while I unscrewed the defective coupler in a "clockwise" direction. I eventually found a small, old pair of adjustable wire strippers. I was able to wiggle them in and barely grab the motor shaft. I turned the coupling clockwise and it came right off. No problem at all. Turns out that all that was probably needed was to insert a small punch between the motor fan blades through the bottom of the unit just to keep the motor from turning. The new fitting doesn't have to be on any more than hand tight, as the blender runs in a clockwise rotation, and will keep the fitting snug all the time.
Good luck, home mechanics.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from Lynn, MA
- Parts Used:
- 9704200
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
broken jar
replaced jar
Was this instruction helpful to you?
Thank you for voting!