The lid latch is a safety feature found in your washer. Its purpose is to stop the machine from spinning when the lid is opened. You may need to replace the lid latch assembly if your washer will not start, the lid will not close, or the lid will not open. This is a genuine OEM part, and to do this repair you will need a 1/4-inch nut driver and small flat blade screwdriver. You will also need to disconnect the power and water supply from your washer before beginning.
Works with the following brands:
Whirlpool, Maytag, Kenmore, Amana
Works with the following products:
Washer
Fixes the following symptoms:
Will Not Start, Lid or door won’t close, Will not drain, Will not agitate
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Gloria
January 18, 2023
Will part number W10404050 Lid Latch assembly work with my
Whirlpool model WTW5500XW2?
Thank you.
For model number WTW5500XW2
Hi Gloria, thank you for asking. This lid latch assembly, part number FIX3497627, fits your model. If you require assistance to place an order, please contact customer service. We hope that helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Gregory
October 10, 2021
I have replaced the lid lock and the engaging motor. The lid light stays ON won't go OFF. Can You Help?
For model number WTW5700XW0
Hello Gregory, Thank you for the question. We suggest resetting the Switch. Locate the lid lock switch underneath the top panel. Secure a strong magnet between the switch and the panel. Reattach the top panel and restore power to the washer before repositioning it. Lift the washer lid. If the washer resumes operation, the lock is successfully bypassed. If the Whirlpool washer lid won’t unlock, you may need to reposition the magnet. We hope this helps!
Was this helpful?
Thank you for voting!
Melissa
February 12, 2022
My question is the part# I need is W10404050 will it work with my model#.
For model number WTW4616FW1
Hello Melissa, Thank you for your inquiry. We have researched the model number you have provided and do not show it as compatible to your model. The compatible lid lock assembly is part# FIX12704713. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
for repair instructions: unplug washer so you don't get electrified is the first step, Then turn of water supply and remove the hoses. Now remove the back panel, should be three screws. Also remove the other to screws to raise the top. And there should be one other screw that holds a plate on remove as well. Don't worry about mixing up th
... Read moree screws they should all be the same size. Now raise the top and remove the 2 screws that hold the lid latch. Follow the wire to the back of washer and unplug the lid latch. To install new lid latch assembly reverse instructions and replace all screws from where they where removed.
Washer lid lock quit. Washer would not latch or unlatch.
I followed the video. 1.Unplugged washer. 2.Removed back panel from washer using nut driver. 3. Raised washer top. 4.Unhooked old latch assembly. 5.Replace latch assembly, put in new latch. 6. Put everything back together. Super easy.
Unscrewed the screws from back of washer an was able to lift lid to get to latch came out easy an installed new part quickly, unfortunately for me there must be an additional issue it still fails to in gauge.
Disconect back panel of control unplug wiring and un scrue two scrue on back panel move lid for word and lift un scrue part replaced reinstallation by going back weird
It was a snap lifted washer top. That was the hard part.you must take two nut out from back. Push top to the front raise led support led after that follow old part it a snap..
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
★
Customer Reviews
Average Rating:
(3 Reviews)
4.3
★★★★★
★★★★★
Filter By Rating:
5★
2
4★
0
3★
1
2★
0
1★
0
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Brenda B - June 20, 2021
Verified Purchase
Whirlpool Washer Repair
Received the part very quickly. However, it did not fix the problem. Trying another part. Unfortunately it's on back order. Waiting for its arrival.
★★★★★
★★★★★
James N - August 6, 2020
Verified Purchase
locking latch
The replacement part fit but the lid latch didn't fit the slot it was to wide insert into the opening and lid wouldn't close.
★★★★★
★★★★★
Kristin E - May 14, 2019
Verified Purchase
Easy Install
The how to video made this quick & easy. Washer was back up & running in less than 15 minutes. We purchased our Maytag bravos series washer in 2011. It started having issues with the lid latch mechanism in 2014. We’ve had to slam the lid shut for the past 5 years, until it finally gave out & wouldn’t work at all. Ordered this new lid latch assembly, it arrived a few days later & installation was a breeze. Now we can gently close the lid & you can hear it lock as soon as you press the start button.
Model Compatibility
This part works with the following models:
Fix Number: FIX3497627
Manufacturer Part Number: W10404050
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
