Gearcase 3360629
$379.33
In Stock
- Fix Number:
- FIX341974
- Manufacturer #:
- 3360629
- Manufactured by:
- Whirlpool
Jump to:
Product Description
This is used in your direct drive washer that has a neutral drain.
-
Works with the following brands:Whirlpool, Kenmore, KitchenAid, Roper
-
Works with the following products:Washer, Washer Dryer Combo
-
Fixes the following symptoms:Will not agitate, Leaking
-
Part# 3360629 replaces these:AP3096209, 423, 3360629, 285312, 285362, 3349296 ... Show more , 3360629R, 3360630, 388763, 389244, 389246, 3949609, 62534, 62570, 62621, 62680, 63320, 63563, 63910, 8532118, 8546456, 99890390, 99890391, W10140301, W10140304, W10140307, W10155438, W10172898, W10251783, W10251785, WP62621, WP8546456 Show less
- Works with the following brands:
- Whirlpool, Kenmore, KitchenAid, Roper
- Works with the following products
- Washer, Washer Dryer Combo
- Fixes the following symptoms
- Will not agitate, Leaking
- Part# 3360629 replaces these:
- AP3096209, 423, 3360629, 285312, 285362, 3349296, 3360629R, 3360630, 388763, 389244, 389246, 3949609, 62534, 62570, 62621, 62680, 63320, 63563, 63910, 8532118 ... Show more , 8546456, 99890390, 99890391, W10140301, W10140304, W10140307, W10155438, W10172898, W10251783, W10251785, WP62621, WP8546456 Show less
Part Number Cross Reference
Videos For installing this part.
Replacing your Gearcase
Replacing your Gearcase
Questions and Answers
Be the first to ask our experts a question about this part!
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts Additional or alternate parts to consider.
View More
View Less
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
would not spin
well i replaced a lot of parts..but i think it was the the lid switch. but now its brand new..Thanks
17 of 20 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Cory from Sherwood, OR
- Parts Used:
- 3360629
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
23 yr. old machine had a rythmic thump sound.
Suspected the clutch, but turned out to be worn out nylon gear in the gear case. After compairing the cost of replacing the gear and related pieces a new assembly was more cost effctive.Disconnected the power. Removed the agitator from the main drum. Tilted the washer at a 45 degree angle against the wall to gain access to the pump/motor/
... Read more
gear case Assy. below the drum. Unclipped the pump and pushed to the side. Disconnected the motors electrical connections and removed the three mounting bolts that attach the gear case to the washer and removed the assembly from the washer. Replaced the gear case and reassembled. Unit works perfect.
Read less
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Noisy during operation. I found oil on the floor under the washing machine.
Slow gear case leak was at the input shaft seal. I followed the gear case video instructions which are quite good. However the video says you can buy the needed spanner for the tub nut here on this site. I sure couldn't find it and had to order from elsewhere. In this case a TB123A fit well. Upon testing I had a noise when the pump was ru
... Read more
nning. I discovered that I missed aligning one pump leg to the recess. After I released the pump clamps, and slightly repositioned and re-clamped it was fine. The upper agitator was replaced due to slight wear on the internal teeth. The original agitator bolt's intrinsic rubber seal (bolt, washer/seal all one piece) was worn so I replaced that too.
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX341974
Manufacturer Part Number: 3360629
Manufacturer Part Number: 3360629
Brand
Model Number
Description
Kenmore
10682872600
Washer
- Kenmore Washing Machine Model 106.82872600 (10682872600, 106 82872600) Parts
Kenmore
1101050299
Washer
- Kenmore Washing Machine Model 110.1050299 (1101050299, 110 1050299) Parts
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.