Agitator Cap Barrier with Seal
Works With Model KAWS700GQ0!
$10.83
In Stock
Fix Number: FIX11748113
Manufacturer #: WPW10074580
Manufactured by:
Whirlpool
Works With Model KAWS700GQ0!
-
Product Description
The O-Ring is included with this cap. It can be purchased separately as Part #WPW10072840.
-
Works with the following brandsWhirlpool, KitchenAid, Maytag, Kenmore
-
Works with the following productsWasher, Washer Dryer Combo
-
Fixes the following symptomsWill not agitate, Leaking, Does not dispense fabric softener or detergent, Marks left on clothes
-
Part Number Cross ReferencePart# WPW10074580 replaces these:AP6014843, 285551, 3347290, 3354733, W10074580
Product Description
The O-Ring is included with this cap. It can be purchased separately as Part #WPW10072840.
-
Works with the following brands:Whirlpool, KitchenAid, Maytag, Kenmore
-
Works with the following products:Washer, Washer Dryer Combo
-
Fixes the following symptoms:Will not agitate, Leaking, Does not dispense fabric softener or detergent, Marks left on clothes
-
Part# WPW10074580 replaces these:AP6014843, 285551, 3347290, 3354733, W10074580
Videos For installing this part.
Replacing your Agitator Cap Barrier with Seal
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
George
January 8, 2022
#1 I watched your video on removing the Agitator Cap Barrier with Seal and it looked extremely easy but it will not come off for me. I don't want break the plastic. Do you have any suggestions on how to remove it?
#2 the other thing is the softener dispenser. The one I have is not as long as the one in your video. Mine actually looks like the one in the parts diagram that you show on your website. It comes as an assembly. What I need to know is the part inside the assembly is shaped like a cone. Does the suppose point upward or down ward, in the assembly?
Thank you for your time.
George
For model number 11029822800
Hello George, Thank you for your inquiry. You can try using a flat head screw driver or putty knife to gently pry up the sides of the cap or alternatively use a little bit of soap or oil to loosen the cap. The videos are made for multiple models and are designed to give you a general idea of the repair. The top part of the dispenser should say liquid fabric softener dispenser, and the tapered part should point downward. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related PartsAdditional or alternate parts to consider.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
-
Customer:Jerry from Aransas Pass, TX
-
Difficulty Level:Easy
-
Total Repair Time:1- 2 hours
-
Tools:Pliers, Screw drivers, Socket set
Agitator not working correctly and leaking from somewhere underneath.
I watched the videos before I ordered the part and when the order arrived I replaced the parts with no problems. The most time consuming part of the job was cleaning the washer. You will be surprised to find what will accumulate down there after years of service. The order came in in record time so this site gets an A+ for being fast and accurate. No back-orders either. I will surely use for any-other parts I need in the future.
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Richard from Belle Chasse, LA
-
Difficulty Level:Very Easy
-
Total Repair Time:15 - 30 mins
-
Tools:
Top agitator not working
Pull top cap, bolt,remove agitator , pull top half off remove old parts install new parts! About 15 minutes total
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Drew from Nibley, UT
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
The clothes mover on the agitator was not turning properly.
This washer is 17 years old. The whole assembly didn't cost that much more than the parts I needed so I decided to replace the whole agitator assembly not just the dog ear assembly. The video on part select were helpful. I removed the fabric softener dispenser. Reached in and removed the cap barrier with seal. Did this by hand, needle nose pliers were not necessary. Remove the retaining bolt using a 7/16 socket wrench with a 8" extension. Reach in and grab the bottom of the lower agitator and pull the whole assembly straight up out of the washer. I assembled the new parts placing the thrust spacer on top of the agitator. I placed the preassembled cam with dog ears and bearing down into the bottom of the clothes mover. I placed the clothes mover onto the agitator making sure the cam assembly lined up with the thrust spacer properly before I snapped the clothes mover in place. This was the most difficult part of the assembly but was still easy I placed this assembly over the drive shaft of the washer and re-attached the retaining screw and washer. I coated the seal of the barrier cap with liquid detergent and placed it into the clothes mover. Snapped the fabric softener dispenser. Done, works great. It took longer for me to write this than it did to fix the washer.
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Josef from Oak Bluffs, MA
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers
leaks water as soon as tub starts to fill
Tipped the machine on its side , undo the two hose clamps and two pump clips, then pull pump off motor drive. assemble reverse. very easy .. surprised at simplicity of such an expensive machime
Was this instruction helpful to you?
Thank you for voting!
-
Customer:JANET from BUFFALO, MN
-
Parts Used:WPW10074580
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:
Seal Was Broken
Pulled the top off and placed the cap in place with seal in place.
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Barry from Mayfield, KY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
would not agitate clothes to good, they were not coming clean
I followed the repair video you have on this. It was very easy to do. thank you.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX11748113
Manufacturer Part Number: WPW10074580
Manufacturer Part Number: WPW10074580
Brand
Model Number
Description