Maytag/Maytag_Thumb/48374.gif
See part 5 in the diagram
( Grid squares measure 1x1 inch )

Drain Pump with Pulley

$ 70.68   In Stock
Fix Number: FIX11741799
Manufacturer #: WP35-6465
Manufactured by: Whirlpool

Product Description

This pump has 2 ports. This pump helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period of time.

Videos For installing this part.

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 4.4 / 5.0, 7 reviews.
    Sort by:
    Sorry, we couldn't find any existing installation instruction that matched.
    • Customer:
      Rod from Scottsdale, AZ
    • Parts Used:
      WP35-6465
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      15 - 30 mins
    • Tools:
      Pliers, Screw drivers, Socket set
    Water leaking from pump
    Tip washer onto front. Remove drive belt fro pump pulley. Remove 4 screws holding access panel surrounding the drain hose. Slide spring clamps back on to the 2 hoses. Remove 3 bolts holding pump. Reverse steps to reassemble.
    4 of 4 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    • Customer:
      William from Baltimore, MD
    • Parts Used:
      WP35-6465
    • Difficulty Level:
      Easy
    • Total Repair Time:
      15 - 30 mins
    • Tools:
      Nutdriver, Screw drivers, Socket set
    Washer started to make loud, screeching sounds
    The drive belt would not rotate as normal once the washer ran about 10 mins.Washer started to make loud, screeching sounds and the drive belt would not rotate as normal once the washer ran about 10 mins. The belt would burn at the motor. Troubleshooting this, I started with the motor. Since the belt was burning at the motor, even after the 10 minute shutdown, I could see that the motor was running at its full power causing the belt to be held up elsewhere. The loud noises were coming from the drain pump. After removing the drain pump, it was easy to see the bearings were shot. I had visible wear(which is not something every drain pump might show). Seeing this tells me the bearings were working for the 10 mins causing the screeches and getting hot enough after to seize the belt causing the burning at the motor. (Hope that helps). To replace the pump, you remove the drain pump supply and return hoses by pinching the retaining clamps and shifting the hose ends from the pump supply and return flanges. There are 3 socket head screws retaining the pump, remove those and the pump should want to ease out from the drive belt fairly easily. Replace the pump. Assemble the hoses and socket screws to their proper locations. The drive belt can be placed back online by shifting the motor about 2 inches to the right. There should be clearance for the motor to shift side to side allowing the belt to slack or pull tight. Align the belt to all 3 pulleys and you should be fabulous after that.
    1 person found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    • Customer:
      Desna from Roseland, FL
    • Parts Used:
      WP35-6465
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      15 - 30 mins
    • Tools:
      Pliers, Wrench set
    Replace water pump with pulley
    I watched a friend do it
    1 person found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    • Customer:
      Sung from Warner Robins, GA
    • Parts Used:
      WP35-6465
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      15 - 30 mins
    • Tools:
      Pliers, Socket set
    washer was making noise during every stage of the washing.
    I watch the video that was provided, and did exactly as the video, and it took me about 15-20 minute. The only thing that got me was I pull the water drain hose out to fast and got little water on me. Make sure to put a rag that will absorb water around the drain pump, and have a small but low bucket to catch the extra water in the hose. Other than that it was simple. My next project is to change the snubber ring because my washer is shaking and I saw some plastic shaving under the washer tub.
    0 of 1 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    • Customer:
      James E. from CONCORD, NC
    • Parts Used:
      WP35-6465
    • Difficulty Level:
      Very Easy
    • Total Repair Time:
      15 - 30 mins
    • Tools:
      Nutdriver, Pliers
    Water leaking from washer
    Removed front panel , replaced water pump and closed it back up. Thanks to your videos I shouldn't need a repairman again! Thank you, James
    0 of 1 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    • Customer:
      Karl from Houston, TX
    • Parts Used:
      WP35-6465
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      15 - 30 mins
    • Tools:
      Nutdriver, Pliers
    Screeching Noise Till The Tube Seized Movement.
    Started by removing the front panel to isolate the sound. Tilted the unit to remove the drive belt and spun the pulley to make sure that my problem was the pump. Once the new pump arrived I pulled the unit away from the wall and removed the rear access panel. Then removed the two hoses after draining what little water was left in the hoses. Followed by removing the three screws holding the old pump and installing the new pump. Next replace the items that I removed and turn the machine back on to check for leaks.
    0 of 1 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    • Customer:
      Clifford from San Bernardino, CA
    • Parts Used:
      WP35-6465
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      15 - 30 mins
    • Tools:
      Pliers, Wrench set
    The 17 years old water pump was leaking
    It took me 30 minutes to screw 3 bolts, reattach 2 rings, drag the machine machine in place and reconnect the water. Then the faucets leaked, so today I turned off the water and disassembled the head of the faucet to attach plumber plastic white tape. It does not leak any more, the washing machine works as a charm. I am planning to order the belt because I notice it had a little crack in it. Kindly yours, Cathy
    0 of 1 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
      Model Compatibility
      This part works with the following models:
      Fix Number: FIX11741799
      Manufacturer Part Number: WP35-6465
      Brand
      Model Number
      Description
      Norge
      6002A
      Washer - WASHER
      Norge
      6002A REV A
      Washer - Norge Washing Machine Model 6002A REV A (6002AREVA) Parts
      Norge
      6430
      Washer - WASHER
      Norge
      6430 LOT A
      Washer - Norge Washing Machine Model 6430 LOT A (6430LOTA) Parts
      Norge
      6430 LOT A REV A
      Washer - Norge Washing Machine Model 6430 LOT A REV A (6430LOTAREVA) Parts
      Norge
      6430 LOT A REV B
      Washer - Norge Washing Machine Model 6430 LOT A REV B (6430LOTAREVB) Parts
      Norge
      6432A
      Washer - WASHER
      Norge
      6432A REV A
      Washer - Norge Washing Machine Model 6432A REV A (6432AREVA) Parts
      Norge
      6432A REV B
      Washer - Norge Washing Machine Model 6432A REV B (6432AREVB) Parts
      Norge
      6432A REV C
      Washer - Norge Washing Machine Model 6432A REV C (6432AREVC) Parts
      Norge
      6432A REV D
      Washer - Norge Washing Machine Model 6432A REV D (6432AREVD) Parts
      Norge
      6433A
      Washer - WASHER
      Norge
      6440A
      Washer - WASHER
      Norge
      6440A REV A
      Washer - Norge Washing Machine Model 6440A REV A (6440AREVA) Parts
      Norge
      6440A REV B
      Washer - Norge Washing Machine Model 6440A REV B (6440AREVB) Parts
      Norge
      6440A REV C
      Washer - Norge Washing Machine Model 6440A REV C (6440AREVC) Parts
      Norge
      6440A REV D
      Washer - Norge Washing Machine Model 6440A REV D (6440AREVD) Parts
      Norge
      6440A REV E
      Washer - Norge Washing Machine Model 6440A REV E (6440AREVE) Parts
      Norge
      6440A REV F
      Washer - Norge Washing Machine Model 6440A REV F (6440AREVF) Parts
      Norge
      6440A REV G
      Washer - Norge Washing Machine Model 6440A REV G (6440AREVG) Parts
      Norge
      6440A REV H
      Washer - Norge Washing Machine Model 6440A REV H (6440AREVH) Parts
      Norge
      6440A REV J
      Washer - Norge Washing Machine Model 6440A REV J (6440AREVJ) Parts
      Norge
      6440A REV K
      Washer - Norge Washing Machine Model 6440A REV K (6440AREVK) Parts
      Norge
      6443A
      Washer - WASHER
      Norge
      6443A REV D
      Washer - Norge Washing Machine Model 6443A REV D (6443AREVD) Parts
      Norge
      6443B
      Washer - WASHER
      Norge
      6530A
      Washer - WASHER
      Norge
      6530A REV A
      Washer - Norge Washing Machine Model 6530A REV A (6530AREVA) Parts
      Norge
      6530A REV B
      Washer - Norge Washing Machine Model 6530A REV B (6530AREVB) Parts
      Norge
      6530A REV C
      Washer - Norge Washing Machine Model 6530A REV C (6530AREVC) Parts