Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
Tub Seal and Bearing Kit
$131.79
In Stock
- Fix Number:
- FIX3503261
- Manufacturer #:
- W10435302
- Manufactured by:
- Whirlpool
- Product Description
- This kit includes the shaft, 3 bearings, seals , grease, adhesive and the spanner nut, which is NOT sold separately. Also may require a bearing driver tool to install. PS3503307
- Works with the following brands:
- Maytag, Whirlpool, Kenmore
- Works with the following products
- Washer
- Fixes the following symptoms
- Leaking
- Part# W10435302 replaces these:
- AP5325033
Part Number Cross Reference
Product Description
This kit includes the shaft, 3 bearings, seals , grease, adhesive and the spanner nut, which is NOT sold separately. Also may require a bearing driver tool to install. PS3503307
-
Works with the following brands:Maytag, Whirlpool, Kenmore
-
Works with the following products:Washer
-
Fixes the following symptoms:Leaking
-
Part# W10435302 replaces these:AP5325033
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Curtis
February 23, 2024
Having trouble removing tub
For model number MVWB450WQ0
Hello Curtis, thank you for your question. We have a video that shows how to tear down a top load washer. We hope this helps.
Was this helpful?
Thank you for voting!
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Loud noise, grease at bottom of washer and on floor
First of all thanks to this site for the right parts good instructions and fast delivery. I didn't get the bearing tool so I used a metal spike used to set concrete forms to remove the bearings and wood block to replace them 1. Remove the back of the washer with a screwdriver and Tape the lid to the top of the washer. 2. use a screwd
... Read more
river or wood chisel to release the two catches on the front of the top and lift the top up and over (I used a chair to hold it). 3. remove agitator cover and find the bolt, remove the bolt and lift the agitator and gears out of the machine. Lift the center basket out and set it aside. 4.Set the washer on it side so you can get to the bottom of the machine (I leaned mine against a chair with a blanket in between to keep from scratching it). Remove the allen screw at the bottom of the rotor/motor. remove the outer part of the rotor/motor. 5. remove the 4 bolts and the plate securing the inner rotor/motor and pull it down so you can remove the plastic sensor holding the electrical connections. 6. Remove the second plate, if it hasn't fallen, and you will see the lower bearing and shaft. 7. Set the washer up and remove the shaft from the top. 8. Take the spike and hammer and, from the top , tap the lower bearing out. 9. Return the washer to the side position and from the bottom tap the upper bearing out. 10. clean up the grease and such from the machine. 11. Using a piece of soft wood as close to the same size as the bearing tap the new bearings back into place, switching positions on the washer as needed. Be careful with the bearings try to tap easy and make sure the bearings are going on straight. 12. Install the shaft into the bearings from the top, using the instructions supplied with the parts. 13. Install the rubber gasket per the instructions as well. 14. Put the agitator and gears back together. 15. Install the rotor/motor and sensor. 16. Secure the top and remove the tape.
Read less
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX3503261
Manufacturer Part Number: W10435302
Manufacturer Part Number: W10435302
Brand
Model Number
Description
✖
Mail-In Recycling Rebate