The hot water valve is found at the back of your washer and controls the flow of hot water into the machine. If the valve is defective, the washer may leak, overfill, fill slowly, or not fill with water at all. If this happens the valve should be replaced. There are a couple different methods for testing if your hot water valve is defective. The first is to use a multimeter on the solenoid, the second is to unplug the washer while it is running. If water continues to flow into the machine, then the valve is defective. This genuine OEM part has a standard hose fitting inlet, one water outlet, and measure approximately 3 inches long by 3 inches wide. To complete this repair, you will need to disconnect the water and power supply to your washer and pull it out from the wall so you can access the back panel.
-
Works with the following brands:
LG, Kenmore
-
Works with the following products:
Washer, Washer Dryer Combo, Dryer
-
Fixes the following symptoms:
Leaking, Water Filling Issues, No hot or cold water, Will not drain
-
Part# 5220FR2006H replaces these:
AP4441935, 1268123, 5220FR2006H, 5220FR1280F, 5220FR2006H, 5220FR2006L
...
Show more
, 5220FR2006Q
Show less
- Works with the following brands:
- LG, Kenmore
- Works with the following products
-
Washer, Washer Dryer Combo, Dryer
- Fixes the following symptoms
- Leaking, Water Filling Issues, No hot or cold water, Will not drain
Part Number Cross Reference
- Part# 5220FR2006H replaces these:
-
AP4441935, 1268123, 5220FR2006H, 5220FR1280F, 5220FR2006H, 5220FR2006L, 5220FR2006Q