( Grid squares measure 1x1 inch )

3522783-1-S-LG-3W20018B-Spanner 360 view

Spanner 3W20018B

Works With Model F1253FDS!

Rated by 1 customers

Easy

More than 2 hours

Ratings submitted by customers like you who bought this part.

$20.95

Fix Number:: FIX3522783
Manufacturer #:: 3W20018B
Manufactured by:: LG

Works With Model F1253FDS!

Jump to:

Product Description
Questions and Answers
Related Parts
Installation Instructions
Model Compatibility

Product Description

Works with the following brands:

LG, Kenmore
Works with the following products:
Washer, Washer Dryer Combo, Laundry Accessories, Dryer
Part# 3W20018B replaces these:

AP4437939, 3W20018B

Works with the following brands:: LG, Kenmore
Works with the following products: Washer, Washer Dryer Combo, Laundry Accessories, Dryer
Part# 3W20018B replaces these:: AP4437939, 3W20018B

Questions and Answers

Be the first to ask our experts a question about this part!

Related Parts Additional or alternate parts to consider.

BOLT ASSEMBLY

$17.80

BOLT ASSEMBLY

$18.85

Affresh Dishwasher Cleaner Tablets - 6

$22.00

Affresh Washing Machine Cleaner - 3 pack

$19.89

Produce Preserver Filter

$17.80

Affresh Washing Machine Cleaner Tablets – 6 Count

$27.76

Refrigerator Deodorizer

$30.85

Affresh Ice Machine Cleaner

$26.73

View Less

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 2.5 / 5.0, 1 reviews.

< Prev
1
Next >

Sort by:

Customer:: Kenneth from CHARLES TOWN, WV
Parts Used:: 4779ER3002A, 3W20018B
Difficulty Level:: Easy
Total Repair Time:: More than 2 hours
Tools:: Pliers, Wrench set

Replace Leveling Legs and adjust level

My washer has a pedestal with a drawer below the washer. If yours has this then begin at Step 1, otherwise go to Step 3.

Some of the old legs were badly rusted so I decided to spray them with Liquid Wrench and let them soak before trying to change them straightaway and possibly breaking one off. This meant I needed to get acces ... Read more s to the legs by removing the drawer from the Pedestal.

Step 1. Remove drawer from Pedestal. Pull drawer out and remove two screws from each side of drawer railing. Drawer will then slide out giving access to the leveling legs.

Step 2. Spray all leveling legs with Liquid Wrench to loosen the rusted legs. Let them sit while doing Step 3.

Step 3. Gather wood blocks, pry bar to lift side of the washer. (Thickness of two 2x4's is needed. More blocks are needed to support the pry bar.

Step 4. Move washer out from wall and get space to work. Do one side and finish changing the legs on that side before switching sides and doing those legs. Use pry bar to lift side of washer and slide blocks underneath.

Step 5. Use 17mm open end wrench, vise grips, or large Channel locks to remove old corroded legs. Use whatever tool works to remove the old legs. Grease and install the new leveling legs making sure their locking nuts are on before installing. Leave enough height on legs to allow for adjustment later.

Step 6. After removing the old legs and installing the new ones you are ready to adjust the legs. I did not have enough space to do this with the washer in its intended place, so I had to do it before walking the washer back to its spot. Using a level, I first leveled the washer from back to front using the legs first changed in Step 5. Once that was done, then I leveled the washer from side to side on the front. I kept working in this way going around all sides of the washer until it was level and then locked the lock nuts on all the legs. I rechecked to make sure the adjustments were correct after locking the legs. After moving the washer into place I rechecked the levels and the stability of the washer by pressing the corners down to see if there was any "give".

Step 7. I cut some small squares of 1/4" rubber sheeting I had lying around to make anti-vibration, anti-walking pads and put them under the legs. This took a while because of the tight access. I had to use a small stick to get the rear legs supported on the pads. Thus far, the homemade pads seem to be working. There was no perceptible movement of the washer after the first wash.

Read less

1 person found this instruction helpful.

Was this instruction helpful to you?

< Prev
1
Next >

Model Compatibility

This part works with the following models:

Fix Number: FIX3522783
Manufacturer Part Number: 3W20018B

Brand	Model Number	Description
LG	40002	Washer
LG	40121	Washer
LG	40131	Washer
LG	40141	Washer
LG	40147	Washer
LG	40262	Washer
LG	40277	Washer
LG	40311	Washer - Washer
LG	40315	Washer
LG	40318	Washer - Washer
LG	40441	Washer
LG	40445	Washer
LG	40518	Washer - Washer
LG	40776	Washer
LG	40996	Washer
LG	41025	Washer
LG	41028	Washer - Washer
LG	41029	Washer - Washer
LG	41729	Washer Dryer Combo - Washer-Dryer
LG	41962	Washer - Washer
LG	51022	Refrigerator
LG	51122	Washer Dryer Combo - Washer-Dryer
LG	51123	Washer Dryer Combo - Washer-Dryer
Kenmore	79628862700	Washer - Kenmore Washing Machine Model 796.28862700 (79628862700, 796 28862700) Parts
Kenmore	79628869700	Washer - Kenmore Washing Machine Model 796.28869700 (79628869700, 796 28869700) Parts
Kenmore	79640021900	Washer
Kenmore	79640272900	Washer
Kenmore	79640311900	Washer
Kenmore	79640318900	Washer
Kenmore	79640441900	Washer