Tapping Screw

took the top off unplug the face plate then the plug on the door lock pulled the spring load ring around rubber seal only on front door put a 12'' piece of wood under the drum just behind the screws then pull just the 2 top pins out of front shocks left/right side only you don't have to take the back one off then unscrew all the screws ar ... Read more ound the drum you will need a 10mm socket an ex/ratchet remove the balance waits gray one on top brown on the bottom then go around back and pull the small cover remove the bolt reach over the top hold drum loosen bolt almost there once bolt is removed the round winding cover once you done that go around to the front and slide drum out and there is the spider mine was all rotted out remove the 6 little bolts once you remove all the 6 bolts out take a small block of wood and tap with hammer once you have the spider in hand order your parts I replace the spider the rubber o ring gasket around the drum just because I was there that's easy to replace your already there just reverse the process o 1 more thing while you have the drum out clean it just wet it you wont belive all the dirt that is on the drum I save my self about 400 dollars or buying a new one I am back to washing thanks hope that is helpful