Watch the install video
3408155-1-M-Whirlpool-W10339326-Water Level Switch
Part Location Diagram of W10339326 Whirlpool Water Level Switch
See part 12 in the diagram
Replacing your Kenmore Washer Water Level Switch
( Grid squares measure 1x1 inch )
3408155-1-S-Whirlpool-W10339326-Water Level Switch 3408155-2-S-Whirlpool-W10339326-Water Level Switch Part Location Diagram of W10339326 Whirlpool Water Level Switch Replacing your Kenmore Washer Water Level Switch

Water Level Switch

Rated by 2 customers 

?

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

?
$141.60
In Stock
Fix Number: FIX3408155
Manufacturer #: W10339326
Manufactured by: Whirlpool
  • Product Description

    This part is located behind the control panel. It helps determine the level of water in the washer. As the water fills the hose, while tub is filling, it will push the air against a diaphragm inside the switch. More water that enters the tub, more pressure is applied against the switch.

  • Works with the following brands
    Kenmore, Whirlpool, KitchenAid, Crosley
  • Works with the following products
    Washer
  • Part Number Cross Reference
    Part# W10339326 replaces these:
    AP4568366, 1658886, 3366845, 3950420, W10339326VP
1 Installation Video Questions and Answers
2 Installation Instructions Model Compatibility
Product Description Part Videos Questions and Answers Installation Instructions Model Compatibility

Product Description

This part is located behind the control panel. It helps determine the level of water in the washer. As the water fills the hose, while tub is filling, it will push the air against a diaphragm inside the switch. More water that enters the tub, more pressure is applied against the switch.

  • Works with the following brands:
    Kenmore, Whirlpool, KitchenAid, Crosley
  • Works with the following products:
    Washer
  • Part# W10339326 replaces these:
    AP4568366, 1658886, 3366845, 3950420, W10339326VP

Videos For installing this part.

Replacing your Water Level Switch

Replacing your Water Level Switch

Questions and Answers

Be the first to ask our experts a question about this part!

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.5 / 5.0, 2 reviews.
  • 1
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
  • Customer:
    Shelli from Adams Center, NY
  • Parts Used:
    W10339326, 8544937, WP353244
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
WASHER OVER FLOWING AT ANY SETTING
I WATCHED A VIDEO ON HOW TO TAKE THE FRONT AND SIDE PANEL OFF A UPRIGHT WASHING MACHINE FROM PARTSELECT.COM AND THEN HOW TO REPLACE A WATER PRESSURE SWITCH AND NEW PRESSURE HOSE. THE INSTALLATION ONLY REQUIRED TWO SCREW DRIVERS AND A PAIR OF SCISSORS TO CUT THE PRESSURE HOSE TO LENGTH THE SAME AS THE ONE REPLACED.SHUT THE WATER OFF AND UNHOCK THE HOSES AND UNPLUG THEN TWO SCREWS BEHIND THE MAIN TOP PANEL LEFT AND RIGHT SIDE. THE MAIN PANEL THEN FLIPS BACK. THEN WITH A FLAT SCREW DRIVER RELEASE THE TWO METAL SPRING BANDS ON LEFT AND RIGHT SIDE TOP. THE FRONT AND SIDES PANEL ALL TOGETHER LIFT OFF.NOW YOU CAN REPLACE WATER PRESSURE SWITCH AND PRESSURE HOSE. PUT BACK TOGETHER IN REVERSE AND HOOK UP WATER LINES AND PLUG IN TOOK ALL TOGETHER 30 TO 45 MINS.
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Terry from Newhall, IA
  • Parts Used:
    W10339326, WP353244
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Washer would not fill past a low level no matter the postion of switch
Ordered Water Level Switch which came with a section of hose so I did not need the bag of hose that I ordered as well as switch. Popped off corner pieces on sides of control panel. Removed a small phillips screw on each side holding control panel to top of washer. Removed two phillips screws holding rear metal plate near top to back of switch panel. Tilted control panel ahead and removed hose from old switch. Pulled knob off front. Turned switch approx 1/8 to 1/4 turn counter clockwise to release switch from panel. Reversed to install new. Replaced clear hose and connected to switch. Reinstalled previously removed knob, screws and trim pieces. All done, Yea works!
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Model Compatibility
This part works with the following models:
Fix Number: FIX3408155
Manufacturer Part Number: W10339326
Brand
Model Number
Description
Kenmore
11010852990
Washer
Kenmore
11010852991
Washer
Kenmore
11012852100
Washer
Kenmore
11014852300
Washer
Kenmore
11016812500
Washer
Kenmore
11016812501
Washer
Kenmore
11016812502
Washer
Kenmore
11016812503
Washer
Kenmore
11016872690
Washer
Kenmore
11016872691
Washer
Kenmore
11016872692
Washer
Kenmore
11016872693
Washer
Kenmore
11018532790
Washer
Kenmore
11018542890
Washer
Kenmore
11018542891
Washer
Kenmore
11020722990
Washer
Kenmore
11020722991
Washer
Kenmore
11020852990
Washer
Kenmore
11020852991
Washer
Kenmore
11020854990
Washer
Kenmore
11020854991
Washer
Kenmore
11020857990
Washer
Kenmore
11020892990
Washer
Kenmore
11020892991
Washer
Kenmore
11020894990
Washer
Kenmore
11020894991
Washer
Kenmore
11020897990
Washer
Kenmore
11020922990
Washer
Kenmore
11020922991
Washer
Kenmore
11020924990
Washer