3652834-1-M-GE-WH13X10053-Valve Triple Water
GE/GE_Thumb/00139238i01.gif
See part 805 in the diagram
( Grid squares measure 1x1 inch )

Valve Triple Water

Rated by 3 customers 

?

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

?
$51.54
In Stock
Fix Number: FIX3652834
Manufacturer #: WH13X10053
Manufactured by: GE
  • Product Description

    The purpose of the triple water valve is to properly fill your washer with water by controlling the hot and cold water going into the tub. If your washer is overfilling or not filling, you may need to replace this part. It is about 5.5 inches in total length. You will find your water inlet valve at the back of your washer.

  • Works with the following brands
    General Electric
  • Works with the following products
    Washer
  • Fixes the following symptoms
    Leaking, No hot or cold water
  • Part Number Cross Reference
    Part# WH13X10053 replaces these:
    AP5629504, WH13X22314
Questions and Answers Questions and Answers
3 Installation Instructions
Model Compatibility
Product Description Questions and Answers Installation Instructions Model Compatibility

Product Description

The purpose of the triple water valve is to properly fill your washer with water by controlling the hot and cold water going into the tub. If your washer is overfilling or not filling, you may need to replace this part. It is about 5.5 inches in total length. You will find your water inlet valve at the back of your washer.

  • Works with the following brands:
    General Electric
  • Works with the following products:
    Washer
  • Fixes the following symptoms:
    Leaking, No hot or cold water
  • Part# WH13X10053 replaces these:
    AP5629504, WH13X22314
Questions and Answers

Questions and Answers

Be the first to ask our experts a question about this part!

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 4.7 / 5.0, 3 reviews.
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
  • Customer:
    Wayne from Minneapolis, MN
  • Parts Used:
    WH13X10053
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Pliers
Water inlet valve leaked water into tub
The leak was intermittent, and only a drop or two per minute. I figured it wasn't worth repairing -- the leak was minor and the water wasn't even wasted. It became part of the next wash load. But one day there was a couple inches of water in the tub, so I ordered the replacement valve from PartSelect. Repair was easy. First, unplug the washer and turn off and disconnect the hoses that supply water to the washer. Watch any video that shows how to remove the top control housing. Once that's tilted out of the way, the valve is easily accessible. Two electrical connectors slide off with a little effort. Two 1/4-in. hex head screws hold it down. A rubber tube is held in place with a spring clip -- you'll need pliers to hold that clip open while you remove the old valve from the tube and insert the new one. Reattach and reconnect everything, and you're done.
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Lee from Fenton, MI
  • Parts Used:
    WH13X10053
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Slow to fill and loud noise when filling.
Removed 3 Sheetmetal screws on top of washer on the back. Removed electrical connections for hot and cold water. Removed two mounting screws, removed hose. Then installed new valve in reverse order. Everything worked perfect problem resolved. Installation was very easy.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Paul from Edmond, OK
  • Parts Used:
    WH13X10053
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
leaky valve . bad design
took out 3 screws to remove top that easy. disconnect wire & install new valve . less than 30min
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Back to Top
Model Compatibility
This part works with the following models:
Fix Number: FIX3652834
Manufacturer Part Number: WH13X10053
Brand
Model Number
Description
General Electric
GCWN4950D0WS
Washer
General Electric
GCWN4950D1WS
Washer
General Electric
GCWN5550D0WW
Washer
General Electric
GHWN4250D0WW
Washer
General Electric
GHWN4250D1WW
Washer
General Electric
GHWN4250D2WW
Washer - WASHER
General Electric
GHWN5250D0WS
Washer
General Electric
GHWN5250D1WS
Washer
General Electric
GLWN5250D0WW
Washer
General Electric
GLWN5250D1WW
Washer
General Electric
GLWN5550D0WW
Washer
General Electric
GLWN5550D1WW
Washer
General Electric
GMAN4250F0WS
Washer
General Electric
GMAN4250F1WS
Washer
General Electric
GMAN5650D0WW
Washer
General Electric
GMAN5650D1WW
Washer
General Electric
GRWN5550D0WS
Washer
General Electric
GRWN5550D0WW
Washer
General Electric
GRWN5550D1WS
Washer
General Electric
GTAN4250D0WW
Washer
General Electric
GTAN4250D1WW
Washer
General Electric
GTAN4250D2WW
Washer - WASHER
General Electric
GTAN5250D0WW
Washer
General Electric
GTAN5250D1WW
Washer
General Electric
GTAN5250D2WW
Washer - WASHER
General Electric
GTAN5550D0WW
Washer
General Electric
GTAN5550D1WW
Washer
General Electric
GTAP2250D0WW
Washer - WASHER
General Electric
GTAP2250D1WW
Washer - WASHER
General Electric
GTMP280ED6WW
Dryer - Dryer
Back to Top