Part Location Diagram of WH08X10036 GE Door Boot Seal
See part 306 in the diagram
Replacing your General Electric Washer Door Boot Seal
( Grid squares measure 1x1 inch )

Door Boot Seal

Rated by 6 customers 

?

Easy 

1- 2 hours 

Ratings submitted by customers like you who bought this part.

?
$240.70
In Stock
Fix Number:
FIX1766023
Manufacturer #:
WH08X10036
Manufactured by:
GE

Product Description

Also known as Bellow. The part may differ in appearance but functions same as original.

Videos For installing this part.

Replacing your Door Boot Seal

Replacing your Door Boot Seal

Questions and Answers

Be the first to ask our experts a question about this part!

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 2.5 / 5.0, 6 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Harold from queens, NY
Parts Used:
WH08X10036
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
water leak through door
Repair was done as per your instructions. Problem i encounter was slipping the wire ring over the booth, I used a wet rag and moisten the booth all around. The wire ring slipped over very easy.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Christy from Council Bluffs, IA
Parts Used:
WH08X10036
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Removing and reattaching the metal band was diffiult because of the difficult access to the screw.
He did the repair watching the video. It was very helpful except there was a step that was not included. But he was able to figure it out.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Mark from Stanville, IL
Parts Used:
WH08X10036
Difficulty Level:
Really Easy
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Socket set, Wrench set
Door boot seal then found I needed a water inlet pipe.
The day befor the parts came in I watched the self video and followed the instructions step by step and it was very easy to take washer apart, when the parts came in two days after I ordered them, reassembly was a breeze and the washer works well no more leaks, made me feel very proud of myself for doing it and thanks for the video, very hepful.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Gregory from Bellingham, WA
Parts Used:
WH08X10036
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Screw drivers
Door boot seal was leaking
I simply followed the video which accompanied the part description . . . .took some time, but it was worth it.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Azalia from Johns Creek, GA
Parts Used:
WH08X10036
Difficulty Level:
Difficult
Total Repair Time:
More than 2 hours
Tools:
Pliers, Screw drivers, Socket set, Wrench (Adjustable)
leaking door boot seal
The hardest problem we had was replacing the boot seal back on the rim of the washer and the tightening the first band. The video was great to view as we were installing the part.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
David from Jonesboro, AR
Parts Used:
WH08X10036
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
Leaking down the front of the washer door
The most useful instruction I would make is to spend the preparation time to view and UNDERSTAND the video which is extremely helpful and well done. This is model specific and will allow you to take off the old gasket and place in the new without difficulty. Have the video handy and if a question arises simply go back and watch that step again. No other tools are required. (nut driver 7 mm could be replaced by a 7mm socket set but an extension bar would be helpful). Only other tip is related to removal and replacement of the inter door wire clamp. Be sure to loosen it sufficiently to remove easily and don't be surprised if it doesn't tighten all the way back to the original point, but be sure no kinks are in the washer and that it is tight when done. If you feel the least bit mechanically inclined with the video you can do it!
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX1766023
Manufacturer Part Number: WH08X10036
Brand
Model Number
Description
General Electric
GBVH5140H0WW
Washer
General Electric
GBVH5140H1WW
Washer
General Electric
GBVH5200J0WW
Washer
General Electric
GBVH5200J1WW
Washer
General Electric
GBVH5200J3WW
Washer
General Electric
GBVH5200J4WW
Washer
General Electric
GBVH5200K0WW
Washer
General Electric
GBVH5300K0WW
Washer
General Electric
GBVH5300K2WW
Washer
General Electric
GBVH6260F0GG
Washer
General Electric
GBVH6260F0WW
Washer
General Electric
GCVH6260F0GG
Washer
General Electric
GCVH6260F0WW
Washer
General Electric
GCVH6260H0WW
Washer
General Electric
GCVH6260H1WW
Washer
General Electric
GCVH6400J0WW
Washer
General Electric
GCVH6400J1WW
Washer
General Electric
GCVH6400J2WW
Washer
General Electric
GCVH6500K0WW
Washer
General Electric
GCVH6500K1WW
Washer
General Electric
GCVH6600H0BB
Washer
General Electric
GCVH6600H0GG
Washer
General Electric
GCVH6600H0MB
Washer
General Electric
GCVH6600H0MS
Washer
General Electric
GCVH6600H0WW
Washer
General Electric
GCVH6600H1BB
Washer
General Electric
GCVH6600H1GG
Washer
General Electric
GCVH6600H1MB
Washer
General Electric
GCVH6600H1MS
Washer
General Electric
GCVH6600H1WW
Washer