Timer Knob
$14.33
In Stock
Fix Number: FIX1482286
Manufacturer #: WH01X10310
Manufactured by:
GE
-
Product Description
This is a genuine OEM replacement timer knob for your washing machine that is white in color. Replacing this part is a simple repair that only requires a pair of needle nose pliers. We suggest disconnecting the power so that you do not accidentally start the washer when replacing the knob. Use the pliers to remove the retaining clip on the old knob, and then remove the part from the shaft. The new knob will have the retaining clip already attached. Simply line up the knob opening with the shaft and push it into place.
-
Works with the following brandsGeneral Electric, Hotpoint
-
Works with the following productsWasher
-
Fixes the following symptomsWill Not Start, Touchpad does not respond
-
Part Number Cross ReferencePart# WH01X10310 replaces these:AP3994965, 1264403, WH01X10310, WH01X10061, WH01X10310-25PK
Product Description
This is a genuine OEM replacement timer knob for your washing machine that is white in color. Replacing this part is a simple repair that only requires a pair of needle nose pliers. We suggest disconnecting the power so that you do not accidentally start the washer when replacing the knob. Use the pliers to remove the retaining clip on the old knob, and then remove the part from the shaft. The new knob will have the retaining clip already attached. Simply line up the knob opening with the shaft and push it into place.
-
Works with the following brands:General Electric, Hotpoint
-
Works with the following products:Washer
-
Fixes the following symptoms:Will Not Start, Touchpad does not respond
-
Part# WH01X10310 replaces these:AP3994965, 1264403, WH01X10310, WH01X10061, WH01X10310-25PK
Videos For installing this part.
Replacing your Timer Knob
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related PartsAdditional or alternate parts to consider.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- 2
- 3
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
-
Customer:David from Tulalip, WA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers, Wrench (Adjustable)
Washer overfilled on some cycles. Wouldn't spin on some cycles.
I watched the videos. Wasn't sure if I needed dual water inlet valve or water level pressure switch, so I installed both. They solved the problem. Great web site and useful videos.The knob was installed as well with the help of the video.
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Bernard from CHARLOTTE, NC
-
Parts Used:WH01X10310
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers
Cycle select knob teeth were stripped.
Used needle nose plier to remove "U" shaped plastic retainer, (same function as a cotter pin), from broken knob.
Removed defective knob.
Replaced with new knob.
Used needle nose plier to insert "U" shaped plastic retainer.
Washer restored to original condition.
Removed defective knob.
Replaced with new knob.
Used needle nose plier to insert "U" shaped plastic retainer.
Washer restored to original condition.
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Keith from Worthington, OH
-
Parts Used:WH01X10310
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers
Cycle selector would not turn with timer knob
Disconnect power, pull timer knob out to the full extension. Behind the knob is a plastic keeper key. With needle nose pliers, pull up to release the knob. On the new knob, the keeper key is already in place. Press the knob onto the shaft and the job is done.
Was this instruction helpful to you?
Thank you for voting!
-
Customer:charles from richfield, OH
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
no agitation
pop off the agitator unscrewed the plastic holder .snapped the new holder on tightened the holder reinstalled the agitator works find.
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Kevin from LAS VEGAS, NV
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
Timer knob base teeth were gone and couldn’t engage the selector.
Removed clip holding knob on and replaced both. Only difficulty was trying to see the clip to remove it. Ended up bending the clip. Replacement was easy.
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Samuel from Phoenix, AZ
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:
timer dial not positioned. Know cogs kworn
Removed holding clip. Pulled knob off. Removed dial. reversed procedure to repair. Very easy
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Peter from CLIFTON, NJ
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers
Knob replacement
Unplugged washer. Using needle nose pliers removed old knobs and installed new ones. Your how to video was helpful.
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Darrel from Casey Creek, KY
-
Parts Used:WH01X10310
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers
Timer wouldn't advance
I watched the video? ordered parts it took a lot less time to install them than it's took to write this! Thank you!
Was this instruction helpful to you?
Thank you for voting!
-
Customer:ETHEL from GREENSBORO, GA
-
Parts Used:WH01X10310
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers
The washer cycle control knob would just spin around. It wouldn't make the selector move.
Let me first say how pleased I am with this company! Not only did I get the part I ordered, but it came a few days sooner than expected! This is how I fixed it...I just used needle nose pliers to grab hold of the clip that is behind the old knob and pulled the clip off. Once you get that clip off, the old knob will pull right off. Then I took the knob that I ordered ( which already has a clip on it) and simply pushed it on. It took less than 15 minutes to fix and I am a 62 years old grandma!It cost just over $10.00 for the part and shipping. I first googled the problem, and then I found this video on how to replace the knob: Thank you for helping this grandma save over $125.00 for a repair job.
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Patricia from St Louis, MO
-
Parts Used:WH01X10310
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers
Knob teeth were worn smooth
Took the pin behind knob off with needle nosed pliers, knob slipped off. Pushed new knob on.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- 2
- 3
- Next >
★
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Georgiana G - May 23, 2021
Verified Purchase
satisfied
The knob and clip on my 20 something year old washer broke. It was easy and simple to get a replacement.
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX1482286
Manufacturer Part Number: WH01X10310
Manufacturer Part Number: WH01X10310
Brand
Model Number
Description