Pump to Tub Inlet Drain Hose WH41X22935
$16.93
In Stock
- Fix Number:
- FIX11721808
- Manufacturer #:
- WH41X22935
- Manufactured by:
- GE
Jump to:
Product Description
This replacement inlet drain hose connects your washer's water pump to its tub. This hose is seven and a half inches in length and only two inches wide.
-
Works with the following brands:General Electric, Hotpoint
-
Works with the following products:Washer
-
Fixes the following symptoms:Leaking
-
Part# WH41X22935 replaces these:AP5983873, J27-763, WH41X0371, WH41X10163, WH41X371
- Works with the following brands:
- General Electric, Hotpoint
- Works with the following products
- Washer
- Fixes the following symptoms
- Leaking
- Part# WH41X22935 replaces these:
- AP5983873, J27-763, WH41X0371, WH41X10163, WH41X371
Part Number Cross Reference
Videos For installing this part.
Replacing your Pump to Tub Inlet Drain Hose

Questions and Answers
Be the first to ask our experts a question about this part!
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts Additional or alternate parts to consider.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
- Customer:
- Tom from Caledonia, WI
- Parts Used:
- WH41X22935, WH1X2727
- Difficulty Level:
- Very Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers, Socket set
3 of the 4 dampening straps were broken,inlet hose cracked.
Remove front cover.Remove 2 screws holding top section and lift it up and back.Change straps and hose that are easy to access.Reinstall top and front panels.(Make sure water is turned off and electric is unplugged).For me was an easy fix.Also the parts supplied were the exact fit.Thanks .
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Carrie from Lees Summit, MO
- Parts Used:
- WH41X22935
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Socket set
Hose was puntured and leaking
I removed the punctured hose and replaced it with the new one. The pinch clamps were a little tricky to get around the hose end and the weird angle, but not too hard once I figured out a system. Then had to put the bottom back on and return to ints location. It took longer to unhook it from all the hoses, remove and replace the bottom and
... Read more
rehook to the hoses then the actual repair took!
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jeff from Morton, IL
- Parts Used:
- WH41X22935
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Pliers, Screw drivers
Water leak
Replaced the drain hose just as described in the video.
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX11721808
Manufacturer Part Number: WH41X22935
Manufacturer Part Number: WH41X22935
Brand
Model Number
Description
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.