We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Gary
February 23, 2023
How to change the lid switch on a washer dryer combo?
For model number lse7806ade
Hi Gary, thank you for contacting us. To replace the lid switch on your washer, please go through the following steps:
1. Unplug the washer/dryer.
2. Remove the top panel by first pulling the washer away from the dryer above it, then remove two screws under the top panel at the front.
3. Pull the panel toward you to remove from tabs in the back.
4. Lift the top panel enough to remove the switch assembly (which is located just behind the lid) by removing two screws, and unplugging the wiring harness.
5. Pay attention to where everything goes so you get it back together right, particularly note the placement of the switch actuator arm under the rod on the lid.
6. Replace with a new switch and put everything back together again.
We hope this information helps, good luck with this repair!
Was this helpful?
Thank you for voting!
Installation Instructions Provided by Fix customers like you.
Average Repair Rating: 3.9 / 5.0, 1 reviews.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Unplug the washer/dryer. Remove front panel by removing two screws at the bottom of the panel, pull panel toward you and lift slightly then pull panel down and off. The fuse is located at the front left edge, about a third of the way down from the top. Remove and replace fuse. Remove top panel by first pulling washer away from the drye
... Read morer above it, then remove two screws under the top panel at the front. Pull the panel toward you to remove from tabs in the back. Lift top panel enough to remove switch assembly (which is located just behind the lid) by removing two screws, and unplug wiring harness. Pay attention to where everything goes so you get it back together right, particularly note the placement of the switch actuator arm under the rod on the lid. Replace with new switch and put everything back together again. Once you've done it you'll agree its pretty easy. BTW, the switch I ordered from this site arrived in about 20 hours, on a Saturday. Great service.
Read less
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX2003101
Manufacturer Part Number: 12001514
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
