This bake element is found on the bottom of the oven.
Works with the following brands:
KitchenAid, Whirlpool, Maytag, Crosley
Works with the following products:
Wall Oven, Range, Microwave Oven Combo
Fixes the following symptoms:
Element will not heat, Little to no heat when baking
Part# WPW10207398 replaces these:
AP6017075, 9760768, W10207398
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dwayne
April 4, 2023
I have received a new bake element for my KitchenAid oven. How do I access the old one to replace it?
Thank you,
Dwayne
For model number YKESS907SS05
Hello Dwayne, thank you for contacting us. We are providing you with the instructions that will help you replace the bake element.
1- Remove the screws securing the rear bottom access panel.
2- Disconnect the wires from the bake element terminals.
3- Open the oven door and rotate the door hinge locks back.
4- Partially close the door, then lift and pull the door out.
5- Un-thread the screws securing the oven bottom panel.
6- Un-thread the screws securing the bake element.
7- Replace the old element with the new one.
We hope this information helps!
Was this helpful?
Thank you for voting!
Dwayne
April 12, 2023
I got a new bake element for my KitchenAid oven however, I am not able to access the old one. The inside of the oven is one solid unit which has no screws to remove the base.
Is there another way to access the bake element?
For model number YKESS907SS05
Hello Dwayne, thank you for contacting us. To replace the bake element, follow the following steps:
1. Remove the screws securing the rear bottom access panel.
2. Disconnect the wires from the bake element terminals.
3. Open the oven door and rotate the door hinge so it locks back.
4. Partially close the door, then lift and pull the door out.
5. Unthread the screws securing the oven bottom panel.
6. Unthread the screws securing the baking element.
7. Replace the old element with the new one.
We hope this information helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related PartsAdditional or alternate parts to consider.
This broil element is found on the roof of the oven. The broil element is at the top of the oven and supplies the heat to broiling. 14" x 15" with 1-3/8" inserts.
This part works with the following brands: Whirlpool, ...
$175.81
In Stock
★
Customer Reviews
Average Rating:
(1 Review)
5.0
★★★★★
★★★★★
Filter By Rating:
5★
1
4★
0
3★
0
2★
0
1★
0
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Dale M - December 17, 2020
Verified Purchase
Oven Element
Exact factory replacement part.
< Prev
1
Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX11750370
Manufacturer Part Number: WPW10207398
