Bissell Upright Vacuum Filters

Fix Number

FIX10271956

Manufacturer Part Number

B-203-8161

Genuine Bissell replacement part, this item is sold individually. This Filter is a Pre-Filter, which means it will pick larger debris that the Vacuums pick up before it enters the main Filter. The main Filter will pick up the smaller particles and debris. The B-203-1192 Foam Filter can be washed with water and then left to dry before using it again. Do not use soap when washing this Filter, use water only.

Fix Number

FIX10270533

Manufacturer Part Number

B-203-1215

This part comes directly from the manufacturer. The Lever Filter is used in many models of Bissell vacuum cleaners. This Filter fits into Lock N Seal Lever (part number B-203-1190) and is used to filter out any large particles before the motor. This Filter is made of a flexible foam. This Filter should be replaced if it becomes torn or lost. To replace this part the Dirt Cup (B-203-2453) and the Filter Case (B-203-2454) will need to be removed.

Fix Number

FIX10271152

Manufacturer Part Number

B-203-2663

This is a genuine Bissell replacement part that has been sourced from the original manufacturer to be used with upright vacuums. The filter fits into the post motor tray. The filter is used to prevent dust and debris from entering the motor. This item is sold as an individual replacement part.

Fix Number

FIX10270647

Manufacturer Part Number

B-203-1374

This pre-motor filter is an OEM part from Bissell and is specifically designed to be used in an upright bagless vacuum. This part is used to filter any dust or debris before they enter the motor. Unfortunately, over time this part can become clogged or worn out and needs to be replaced. This part is made of a high-quality foam material and is sold as an individual replacement part.

Fix Number

FIX10270205

Manufacturer Part Number

B-160-1974

Fix Number

FIX10270515

Manufacturer Part Number

B-203-1194

This is an authentic Bissell replacement part manufactured for use with bagless vacuums. The exhaust filter is also known as the post motor filter, and it assists in cleaning the air that leaves the vacuum. It is recommended to replace or clean the filter every 3-6 months, please note the filter is sold individually.

Fix Number

FIX10271151

Manufacturer Part Number

B-203-2662

This Pre Motor Filter is an OEM part that is sourced directly from the manufacturer for use with a Bissell clean view plus vacuum cleaner. This part is used to filter out dust and debris before they enter the motor. This part is located inside the dirt tank lid and needs to be checked and cleaned at least once a month. This can be cleaned with warm water and a mild detergent, rinse well and air dry before putting the filter back in the vacuum. This is made of foam material and is sold as an individual replacement part.

Fix Number

FIX10271827

Manufacturer Part Number

B-203-7593

This is a genuine OEM pre-filter designed for use with Bissell upright vacuums. This filter is located inside of the bottom of the dirt cup. Check the inner and outer circular filters in the filter cup, as well as the pre-motor filter at least once per month and clean or replace as needed. This assembly consists of one (1) pleased paper filter and one (1) foam filter.

Fix Number

FIX10270203

Manufacturer Part Number

B-160-1972

This is an authentic OEM from Bissell. This pre-motor filter is specially designed to be used with Powerglide Upright vacuums. The job of the filter is to filter out dust and debris before they can be sucked into the motor. It is recommended this filter be checked once a month and cleaned when necessary. This part is made of foam material and is sold as an individual part.

Fix Number

FIX10270204

Manufacturer Part Number

B-160-1973