Ice Maker Valves

Refrigerator Single Water Inlet Valve Also known as a Water Solenoid Valve. The water inlet valve is a solenoid-operated switch that, when activated, releases water from the supply line to the water valve and into the compact icemaker mold.

Single Outlet Valve Kit

★★★★★

★★★★★

(1)

This single outlet valve has 1/4 inch compression fittings, and is intended for use with refrigerators that have ice makers that make crescent shaped ice cubes. NOTE: As per the manufacturer this valve has new quick connection. You must cut retaining nut off of the current plastic water line and gently push it into new valve. To remove, depress ring that the tube slides into.

Single Outlet Water Valve Kit

★★★★★

★★★★★

(1)

The water inlet valve is a solenoid-operated switch located at the bottom of the refrigerator. When it is energized by electrical power, water is released from the supply line through the water valve and into the compact icemaker mold. ***Please NOTE: This part has been redesigned and may appear different than the original. It has a new quick connection. To install: cut the retaining nut off the existing water line and gently push into new valve. To remove: depress the ring that the tube slides into.

Water Inlet Valve

★★★★★

★★★★★

(1)

Water Inlet Valve with Quick Connections - 120V 60Hz Used with freestanding ice cube makers.

Water Inlet Valve The connection ports on the water inlet valve are John Guess fittings. To remove, it is recommend to push the line in and then hold the ring in. While holding the ring in, pull the line out. To re-install, push the line in until there is resistance. Push until the line "pops" in another 1/4". Pull on the line with out touching the ring to seat seal. This is a genuine OEM part and inclused 5/16" inlet tube.

Water Inlet Valve

★★★★★

★★★★★

(1)

This part releases water from the supply line when it's activated.

Valve

Water Valve

VALVE