KitchenAid Warming Drawer Parts

KitchenAid Appliance Parts

Popular KitchenAid Warming Drawer Parts

Broil Element
In Stock
Fix Number
Manufacturer Part Number
This broil element is found on the roof of the oven.
Fixes these symptoms
  • Element will not heat
  • Little to no heat when broiling
  • See more...

Installation Instructions

Robert from Louise, TX
Broiler element sparked and burned out
The repair was very simple. First, I shut off the oven power at the breaker box. Next, I used a Phillips head screwdriver to loosen two screws at the back of oven where the broiler element was inserted. Then I removed two screws at the top of the oven where the mounting rack was attached. The next step is to partially move the element forward so that the electrical wires attached to the element could be detached. I used pliers to disengage the push type electrical connection. The wires only protrude about 3", so be careful not to pull the element out too far at this step. Now, just reverse the steps to install the new element. Read more...
In Stock
Fix Number
Manufacturer Part Number
Drawer Slide
In Stock
Fix Number
Manufacturer Part Number
If Drawer Does Not Fit Onto New Slides Then A New Drawer Will Have To Be Ordered By Model #.
Light Switch
On Order
Fix Number
Manufacturer Part Number
Also known as a rocker switch.
High Limit Thermostat
In Stock
Fix Number
Manufacturer Part Number
This part will trip the controls if your appliance gets too hot or if it isn't working properly. It is a safety feature.

Installation Instructions

Larry from Napoleon, OH
Food warmer would not heat up
first took apart appliance and did a electrical check on all wiring connections an d determined there was electricity going into thermostat and non coming out to appliance, i then did an ohms check on the thermostat and it was not letting any electricity pass thru which normally means the part is stuck open so no electricity passes through to heating elements.
So then i looked up the appliance on the internet and found the part i needed at, ordered it, took about 3/4 an hour to 1 1/2 hrs to reassemble and checked thermostat even before putting into appliance and it did what i thought it should do is let electricity pass thru. I then plugged appliance back in crossed my fingers and turn unit on and the light lit up and the warmer started working, Yeaaaaa.
In Stock
Fix Number
Manufacturer Part Number

KitchenAid Warming Drawer Appliance Types

Popular KitchenAid Warming Drawer Models