Roper Ice Maker Parts

Roper Appliance Parts

Popular Roper Ice Maker Parts

Fix Number
FIX11740365
Manufacturer Part Number
WP2315576
Also known as a Water Solenoid Valve. The water inlet valve is a solenoid-operated switch that, when activated, releases water from the supply line to the water valve and into the compact icemaker mold.
Fixes these symptoms
  • Ice maker not making ice
  • Ice maker won’t dispense ice
  • Leaking
  • See more...

Installation Instructions

William from Yuma, AZ
ice water valve leaking
replaced the valve Read more...
★★★★★
★★★★★
1 Review
Fix Number
FIX11739222
Manufacturer Part Number
WP2196157
This kit comes with a fill tube and a compression nut.
Fixes these symptoms
  • Ice maker not making ice
  • Ice maker won’t dispense ice
  • Leaking
  • See more...

Installation Instructions

ron from aliquippa, PA
ice maker not working properly
replace ice maker Read more...
Fix Number
FIX2341896
Manufacturer Part Number
W10190935
This part is used to help tell the icemaker what to do - it turns the timing cams and the ejector blades. Motor is not sold separately.
Fixes these symptoms
  • Ice maker not making ice
  • Ice maker won’t dispense ice
  • Leaking
  • See more...

Installation Instructions

Charlie from Wintergreen Resort, VA
Water was not entering the icemaker tray
I initially replaced the water inlet valve, but that did not correct the problem. Replacing the icemaker control did. I removed the icemaker assembly by unscrewing the 3 nuts with a socket wrench and unplugging the icemaker assembly. I snapped off the white end piece, unscrewed the 3 screws, & removed the old icemaker control. I installed the new unit with a Phillips screwdriver, replaced the icemaker, plugged it in, and tightened the 3 bracing screws. The unit began making ice in one hour. Read more...
Water Tube Kit
$36.12
In Stock
Fix Number
FIX11730901
Manufacturer Part Number
W10823511
This is the replacement water tube kit for your refrigerator. This tubing is made of plastic, is 1/4 inch in diameter, and comes with 2 inserts. This tube may be longer than the original tube, and may need to be cut. This water tube transports water to the ice and water dispensers. If your refrigerator is leaking, or if the ice and water dispensers are not dispensing properly, you may need to replace this tube. This part is sold individually and is an OEM part sourced directly from the manufacturer.
Fixes these symptoms
  • Ice maker not making ice
  • Leaking
  • Not dispensing water
  • See more...

Installation Instructions

ron from aliquippa, PA
ice maker not working properly
replace ice maker Read more...
Cycling thermostat
$62.09
In Stock
Fix Number
FIX11743313
Manufacturer Part Number
WP627985
This part is also known as the cycling thermostat and this bi-metal device controls the activation of the icemaker ejection cycle.
Fixes these symptoms
  • Ice maker not making ice
  • Ice maker won’t dispense ice
  • See more...

Installation Instructions

bruce from Chesterfield, VA
Ice maker stopped working
After watching some repair videos on YouTube of my model ,I found out what things can cause the issue .so I started to test parts .Mine was the mold thermostat that is housed inside the ice maker itself. Used a ohmmeter to test for continuity which there was none and replaced it .. Now it works perfect..I have no background in appliance repair but you tube and and this site saved me a lot of money Read more...
Ice Mold
$165.75
On Order
★★★★★
★★★★★
1 Review
Fix Number
FIX11749915
Manufacturer Part Number
WPW10190929
This ice cube mold and heater assembly has a flake resistant surface. It is used with modular style icemakers on some refrigerators.
Fixes these symptoms

Installation Instructions

lisa from Clemmons, NC
Icemaker leaking water when water filling tray
Icemaker was leaking; read other repair scenarios and determined (hoped) the cause of the leak may have been the seal eroding around the heating coil, therefore tried replacing that piece of the Icemaker. I ordered the part from and followed the EXTREMELY helpful video on YouTube provided by this site and the part replacement was successful and the Icemaker no longer leaks and is working perfectly. Thank you so much for saving me tons of money!! Read more...
Ice Pan
$29.68
In Stock
Fix Number
FIX16745198
Manufacturer Part Number
W11625904

Installation Instructions

Richard from Miami, FL
needed to replace the ice bin
ordered,installed,problem solved Read more...
★★★★★
★★★★★
1 Review
Fix Number
FIX11743318
Manufacturer Part Number
WP628356
This icemaker water inlet cup is three inches long. It is all white in color and is made of plastic.
Fixes these symptoms
  • Ice maker dispenses too much ice
  • Ice maker not making ice
  • Ice maker won’t dispense ice
  • See more...

Installation Instructions

Anthony from West Jordan, UT
Replace Fill cup
Sadly, although it appears you could just snap the fill cup into the groove on the tray, this is not the case. You must remove and disassemble the ice tray assembly to replace this small part. Luckily, this is not terribly difficult. Here are the steps: 1-Remove hex-screw on bottom of ice tray assembly, and loosen two screws on top. 2-Lift assembly off top screws to remove from side of freezer. 3-Unplug power cord. 4-Unsnap front cover on front of unit. 5-Remove ice make motor by removing the screws on front of the unit. 6-Remove Motor Housing by removing the tow recessed screws toward the bottom. 7-Now the ejector arm should be free. Slide it forward from the groove in the ice tray. 8-Remove old fill cup from ejector arm, and slide new fill cup onto it. 9-Reassemble ice tray assembly reversing the steps above. Read more...
Ice Maker Front Cover
$7.76
In Stock
Fix Number
FIX11752097
Manufacturer Part Number
WPW10289690

Installation Instructions

gerald from Mount Prospect, IL
ice maker leaking
replace ice maker. used old bail bar and just exchanged and plug in wire harness and done. Read more...
Compression Nut
$13.13
In Stock
Fix Number
FIX11743305
Manufacturer Part Number
WP627018
This is a compression nut for your refrigerator/freezer. The compression nut is used with the plastic water line for the icemaker assembly. It is the connection between the water supply line and the other components in the unit. This part is necessary to receive water and ice from your appliance. If your ice and water assembly are not dispensing, you may need to replace this part.
Fixes these symptoms

Installation Instructions

ron from aliquippa, PA
ice maker not working properly
replace ice maker Read more...

Appliance Type

Popular Roper Ice Maker Models