International Ice Maker Parts

International Appliance Parts

Popular International Ice Maker Parts

Cycling thermostat
$62.09
In Stock
Fix Number
FIX11743313
Manufacturer Part Number
WP627985
This part is also known as the cycling thermostat and this bi-metal device controls the activation of the icemaker ejection cycle.
Fixes these symptoms
  • Ice maker not making ice
  • Ice maker won’t dispense ice
  • See more...

Installation Instructions

bruce from Chesterfield, VA
Ice maker stopped working
After watching some repair videos on YouTube of my model ,I found out what things can cause the issue .so I started to test parts .Mine was the mold thermostat that is housed inside the ice maker itself. Used a ohmmeter to test for continuity which there was none and replaced it .. Now it works perfect..I have no background in appliance repair but you tube and and this site saved me a lot of money Read more...
★★★★★
★★★★★
1 Review
Fix Number
FIX11743318
Manufacturer Part Number
WP628356
This icemaker water inlet cup is three inches long. It is all white in color and is made of plastic.
Fixes these symptoms
  • Ice maker dispenses too much ice
  • Ice maker not making ice
  • Ice maker won’t dispense ice
  • See more...

Installation Instructions

Anthony from West Jordan, UT
Replace Fill cup
Sadly, although it appears you could just snap the fill cup into the groove on the tray, this is not the case. You must remove and disassemble the ice tray assembly to replace this small part. Luckily, this is not terribly difficult. Here are the steps: 1-Remove hex-screw on bottom of ice tray assembly, and loosen two screws on top. 2-Lift assembly off top screws to remove from side of freezer. 3-Unplug power cord. 4-Unsnap front cover on front of unit. 5-Remove ice make motor by removing the screws on front of the unit. 6-Remove Motor Housing by removing the tow recessed screws toward the bottom. 7-Now the ejector arm should be free. Slide it forward from the groove in the ice tray. 8-Remove old fill cup from ejector arm, and slide new fill cup onto it. 9-Reassemble ice tray assembly reversing the steps above. Read more...
Plastic Tubing
$16.70
In Stock
Fix Number
FIX11747816
Manufacturer Part Number
WPB5705307
1/4" Plastic tubing, 8 1/2 feet long.
Fixes these symptoms

Installation Instructions

dennis from fountain city, IN
not making ice
Replaced water inlet valve Read more...
Compression Nut
$13.13
In Stock
Fix Number
FIX11743305
Manufacturer Part Number
WP627018
This is a compression nut for your refrigerator/freezer. The compression nut is used with the plastic water line for the icemaker assembly. It is the connection between the water supply line and the other components in the unit. This part is necessary to receive water and ice from your appliance. If your ice and water assembly are not dispensing, you may need to replace this part.
Fixes these symptoms

Installation Instructions

ron from aliquippa, PA
ice maker not working properly
replace ice maker Read more...
Ice Bucket
$121.29
In Stock
Fix Number
FIX11743447
Manufacturer Part Number
WP67001255
Holds the ice when it's released by the ice maker.
Ice Stripper
$63.68
In Stock
Fix Number
FIX11739041
Manufacturer Part Number
WP2182124
This part strips ice from the icemaker mold during the ejection cycle to prevent ice pieces from falling back into the mold.
Fixes these symptoms
  • Ice maker not making ice
  • Ice maker won’t dispense ice
  • See more...

Installation Instructions

Ronald from Newton, NC
Ice Stripper broken
First off, I went to this site page to see what part I needed. I took the ice maker out and replaced the parts. It took me about 15 minutes, and I have no experience with appliance repairs. Very Easy and if I can do it, anyone can. Read more...
Ejector Arm
$53.41
In Stock
Fix Number
FIX11743312
Manufacturer Part Number
WP627843
This arm is used to eject the ice from the icemaker into the bin.
Fixes these symptoms
Ice Maker
$88.19
Special Order
Fix Number
FIX11749921
Manufacturer Part Number
WPW10190972
This is the icemaker only. You must use the wire harness, cover and bail arm from the original icemaker.
Fixes these symptoms
Motor Housing
$45.43
On Order
Fix Number
FIX11739202
Manufacturer Part Number
WP2195914
Retainer, Thermostat
$9.40
In Stock
Fix Number
FIX11740356
Manufacturer Part Number
WP2315522

Installation Instructions

Gary from Silver Spring, MD
Leaking ice-maker inlet valve
The part arrived quickly and was very easy to install--However, I had difficulty getting a solid compression fitting connection with a new 1/4-inch copper line. I solved that by using a steel and rubber cushion-clamp to secure the copper line to the refrigerator before successfully achieving a solid compression connection with the inlet valve. Read more...

Appliance Type

Popular International Ice Maker Models