Part Location Diagram of 290069048 Ryobi Carbon Brush Assembly
See part B-7 in the diagram
( Grid squares measure 1x1 inch )

Carbon Brush Assembly 290069048

Rated by 1 customers 

?

A Bit Difficult 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

?
$6.51
In Stock
Fix Number:
FIX10080335
Manufacturer #:
290069048
Manufactured by:
Ryobi

Product Description

This is a genuine manufacturer approved replacement brush. It is specially produced for Ryobi routers. Includes one (1) carbon brush with lead wire, spring and a metal holder attached. Please note, most tools use two brushes. It is recommended to replace both brushes at the same time to ensure top performance. Replacing this carbon brush is a simple task that should only require a screwdriver to complete this job. • First make sure the tool is unplugged • Remove the brush caps • Remove the old brush • Secure the new brush • Reassemble and test your tool

Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jesse Giltamag
July 27, 2026
Is this carbon brush for Ryobi router RE180PL model?
For model number RE180PL2
Fix.com logo
Hi Jesse, thank you for contacting us. Yes, the part you have mentioned is compatible with your model. Glad to be of help!

Was this helpful?
Thank you for voting!

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.4 / 5.0, 1 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
John from HARPSWELL, ME
Parts Used:
290069048
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Replacement brushes did not fit.
I removed old brushes, and seeing they did not match, I made modifications to the new set.
This was done by rotating the brush set 90*, and beveling the edges to match the previous set. This took a little finesse using a knife and sandpaper to fit the tolerances.
All said and done with the new brushes in place, it ran!