GE/GE_Thumb/00116398i02.gif
See part 610 in the diagram
( Grid squares measure 1x1 inch )

Evaporator Fan Motor

$ 49.48   In Stock
Fix Number: FIX10063450
Manufacturer #: WR60X23584
Manufactured by: GE

Product Description

Videos For installing this part.

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 4.2 / 5.0, 17 reviews.
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
  • Customer:
    Francis from Rochester, NY
  • Parts Used:
    WR60X23584
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Noisey fan
Unplug power, remove several parts to access the fan motor located at the back of the freezer section. Disconnect fan motor. Remove impeller from motor shaft. Reassemble all parts. Very easy repair.
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Richard from Hilliard, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
Noisy Freezer
Removed all content of freezer. Unplugged refrigerator. Removed ice rack and back deflector panel including Styrofoam piece. Removed freezer back panel. All simple push and pull or screw attachments. Unplugged motor connector and ground wire. Removed fan bracket with nut driver. Unit was then removed from freezer to conduct replacements. Removed fan blade (simple ring clip and pull off of motor shaft. Replaced items in bracket (required nut driver). Reinstalled all items. First time fix and worked slowly because of unfamiliar with the process. Total start to finish was less than an hour.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Mark from Myrtle Beach, SC
  • Parts Used:
    WR60X23584
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Noisy Fan Motor in Freezer
Removed two panels - Removed motor and fan assy-swapped fan blade to new motor - replaced assy and panels
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Paul from Collinwood, TN
  • Parts Used:
    WR60X23584, WR55X24064
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Wrench (Adjustable), Wrench set
Refrigerator Not Cooling
1) Run Capacitor. Disconnected electrical power plug from the wall socket. Located the Run Capacitor in bottom rear of refrigerator, disconnected the retainer spring, pulled the wasted run capacitor off and plugged the new one into the slot and replaced the retainer spring. 2) Motor AC/DC Evaporator Fan. Opened top freezer door. Removed the shelving by carefully sliding the shelving pins upward and into the recessed slots for easy removal. Used Phillip's head screw driver to remove two screws holding the face guard in place and the 6" Crescent wrench to remove the bracket holding the fan motor to the bracket and the Phillip's head screw driver to remove two screws holding the bracket to the inside rear of the freezer. Unplugged the wasted motor AC/DC Evaporator Fan and plugged the new one into its place. Reinstalled all hardware as it came out. Refrigerator is now working like new. Simple and easy project saved me $100s of dollars fro having to purchase a new Refrigerator. My significant other was happy that it worked so well and saved $$. She was happy and went to Walmart shopping with the savings and brought me a pizza home. Everyone was a winner. Paul and Kimberly Juliana
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    joe from salem, AR
  • Parts Used:
    WR60X23584
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
making noise
very easy to fix. justwatch the repair movie
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Deborah from Davenport, IA
  • Parts Used:
    WR60X23584
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
Fan motor not working in freezer
I removed broken motor. Took off fan blade from old motor and put it on the new motor and installed the new motor.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Denis from Springfield, MA
  • Parts Used:
    WR60X23584
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
the evaporator fan was noisey
I watched a fan repair video on line, I felt this was a repair that could easily be done by me. So I ordered the part and it came in about 4 days. The longest part was emptying the freezer and removing the shelf and the freezer wall which had 4 screws. The removal of the fan, 2 socket screws and the re-assembly took about 15 minutes, total time about 30 minutes. I did have a concern the assembly was not right but after looking at the wiring which was behind the freezer wall, I found it was a match. The repair was just as the video showed. The noise from the fan almost made me buy a new fridge, but now we are back in business, it works great. Thanks for the right part and there is quiet in the kitchen once more.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Derek from Holly, MI
  • Parts Used:
    WR60X23584
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Evap fan was making loud noises
Removed cover from inside of freezer (4) screws. Removed bracket holding evap fan (4) screws. Replaced evap fan. Works great and easy to install.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Joseph from Midland, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
Very Noisy Intermitent Evaporator Fan
I just followed the "how to" videos which were very helpful with one exception. I turned off the circuit breaker in the garage rather than pull the fridge out from the wall to unplug it which was easier. This also eliminated the need to raise the leveling feet so the rollers would touch the floor for a pull out. I replaced the grommets and the fan blade as well but really didn't need to as the motor was the culprit. Works like new now and an expensive service call was avoided.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Anthony from Media, PA
  • Parts Used:
    WR60X23584
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
Noisy fan when fridge was running.
The repair was very simple. I don't have the exact model number of the refrigerator as it is in a rental unit of ours, but it is similar to the HPS15BTHLWW. The fan was noisy when running. After checking to see if the fan was rubbing against something (and it wasn't) we figured the fan was going bad. The process was simple to replace. First, unplug the unit. Next, in the freezer compartment remove 2 screws that hold the baffle that funnels air to the refrigerator compartment and remove baffle. you will also have to remove the Styrofoam air deflector as well. this pulls up and out. Don;t break it. There are also 2 screws on the top of the freezer's back panel as well as 2 nuts that hold the panel on. remove them, then remove the panel to expose the condenser and fan. There are 2 nuts that hold the fan bracket and assembly to the freezer. Remove them, and unplug the power adapter that connects the pan to power. Once the assembly is out of the freezer, firmly grasp the fan blades and pull off of the shaft motor. Next remove the 2 nuts that hold the motor to the bracket - and disassemble the remembering where the rubber components that hold the motor in place go. Replace motor with new motor and reverse the order to reassemble. It was really that easy. .
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Model Compatibility
This part works with the following models:
Fix Number: FIX10063450
Manufacturer Part Number: WR60X23584
Brand
Model Number
Description
General Electric
36211XBMBRWW
Refrigerator
General Electric
36211XBMDRWW
Refrigerator
General Electric
36211XBMERWW
General Electric
36211XBMFRWW
General Electric
36211XBRERWW
General Electric
36211XBRFRWW
General Electric
36411XBRERWW
Refrigerator
General Electric
36411XBRFRWW
Refrigerator
General Electric
37511KBSARWW
Refrigerator
General Electric
37511KBSERWW
Refrigerator
General Electric
38341FBMERWW
General Electric
38341FBMFRWW
Refrigerator
General Electric
38351HBMERWW
General Electric
38351HBMFRWW
Refrigerator
General Electric
38351HBRERWW
General Electric
38351HBRFRWW
General Electric
38451HBRERWW
Refrigerator
General Electric
38451HBRFRWW
Refrigerator
General Electric
A3315ABRERWW
Refrigerator
General Electric
A3315ABRFRWW
Refrigerator
General Electric
A3315ABRW
Refrigerator - GE Refrigerator Model A3315ABRW Parts
General Electric
A3316ABSARBB
Refrigerator
General Electric
A3316ABSARWW
Refrigerator
General Electric
A3316ABSB
Refrigerator - GE Refrigerator Model A3316ABSB Parts
General Electric
A3316ABSBRBB
Refrigerator
General Electric
A3316ABSBRWW
Refrigerator
General Electric
A3316ABSERBB
Refrigerator
General Electric
A3316ABSERWW
Refrigerator
General Electric
A3316ABSW
Refrigerator - GE Refrigerator Model A3316ABSW Parts
General Electric
A3317ABRERWW
Refrigerator