360921-1-M-Whirlpool-4342528 -Range Round Carborundum Oven Igniter
Part Location Diagram of 4342528 Whirlpool Range Round Carborundum Oven Igniter
See part 3 in the diagram
360921-1-S-Whirlpool-4342528 -Range Round Carborundum Oven Igniter 360 view
( Grid squares measure 1x1 inch )
360921-1-S-Whirlpool-4342528 -Range Round Carborundum Oven Igniter 360921-2-S-Whirlpool-4342528 -Range Round Carborundum Oven Igniter 360921-3-S-Whirlpool-4342528 -Range Round Carborundum Oven Igniter 360921-1-S-Whirlpool-4342528 -Range Round Carborundum Oven Igniter 360 view
Part Location Diagram of 4342528 Whirlpool Range Round Carborundum Oven Igniter

Range Round Carborundum Oven Igniter 4342528

★★★★★
★★★★★
2 Reviews

Rated by 6 customers 

?

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

?
$67.93
In Stock
Fix Number:
FIX360921
Manufacturer #:
4342528
Manufactured by:
Whirlpool

Jump to:

Product Description

This round style carborundum gas oven igniter has 10 inch lead and amperage range between 2.5 and 3.0 amps. Be very careful when handling this igniter as it is very fragile. Please note - The bracket and screws are not included. This part will not replace the flat style igniters. Also known as bake and broil igniter.

  • Works with the following brands:
    Whirlpool, Roper, Kenmore, Estate
  • Works with the following products:
    Range
  • Fixes the following symptoms:
    Will Not Start, Little to no heat when baking, Element will not heat, Gas igniter glows
  • Part# 4342528 replaces these:
    AP3104565, 3422, 4342528, 3196447, 4157446, 4322910 , 4332948, 4338008, 4338037, 4342528, 4342528VP, 4389493, 8053999 Show less
Works with the following brands:
Whirlpool, Roper, Kenmore, Estate
Works with the following products
Range
Fixes the following symptoms
Will Not Start, Little to no heat when baking, Element will not heat, Gas igniter glows
Part Number Cross Reference
Part# 4342528 replaces these:
AP3104565, 3422, 4342528, 3196447, 4157446, 4322910, 4332948, 4338008, 4338037, 4342528, 4342528VP, 4389493, 8053999

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

1 question answered by our experts.
  • 1
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dan
November 16, 2021
Will this work on my stove for the oven?
For model number SF375PEEW0
Fix.com logo
Hello Dan, Thank you for contacting us. We have researched the model you have provided and can confirm the part you are looking for is Fix Number: FIX360921. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Was this helpful?
Thank you for voting!
Affresh Dishwasher Cleaner Tablets - 6
$22.91
In Stock
Part Number: FIX12345667
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Affresh Washing Machine Cleaner - 3 pack
$20.71
Special Order
Part Number: FIX1960673
This washing machine cleaner includes three time-release tablets designed to remove odor-causing residues, grime, and buildup from high-efficiency and top-load washing machines. The tablets work by cleaning the tub, pump...
Produce Preserver Filter
$18.54
In Stock
Part Number: FIX3503014
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Affresh Washing Machine Cleaner Tablets – 6 Count
$28.91
In Stock
Part Number: FIX12345661
This Affresh Washing Machine Cleaner deep cleans to help remove the odor-causing residues and grime that daily loads leave behind. The time-release tablets are EPA Safer Choice certified, septic-safe and designed to clea...
Refrigerator Deodorizer
$32.12
In Stock
Part Number: FIX12739141
Refrigerator deodorizers help to reduce bacteria growth and therefore reduce smells and extend the life of food.
Affresh Ice Machine Cleaner
$27.83
In Stock
Part Number: FIX12583750
This nickel-safe, unscented ice machine cleaner measures 16 fluid ounces and is used to remove mineral build-up and hard water and is compatible with several makes and models of freestanding ice machines. To use properly...

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.2 / 5.0, 6 reviews.
  • 1
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Sara from Hudson, IA
Parts Used:
4342528
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
Oven would not light broiler and burners were working
I have removed the bottom floor of the oven before to clean after a major spill, so I knew I could do this. I removed the oven racks. Located the two screws in the back on the floor of the oven, removed them, I used a screw driver (could use a nut driver)remove these two screws (they are about 1.5 inches long). Slightly guide the floor forward to release the two front clips and "jimmy" the floor a bit to remove. (Also, a good time to clean the floor). Now you will see the burner cover remove the two short screws and there is the igniter. Find the wires that feed through the hole in the bottom. Remove the bottom oven drawer; get a flash light; find the clip release on the plastic connection squeeze and pull. Now remove the two nuts that attach the igniter to the bracket on the oven. (I did have a nut driver, but if a person was very careful not to strip the head of the nut -you could use pliers or vise grip). Put the new igniter in place (I used the existing bracket and screws) thread the new wires through the hole in the oven floor clip together. I tried the oven at this point and within 30 seconds oven ignited. Put burner cover and oven floor back in and bake a cake! Also a good time to clean under the stove when you have the drawer out. I found a receipt from 10 years ago when the igniter was replaced and that bill was $163 the igniter and shipping from this site was $55. I imagine it would have been well over $200 to have a repair man come out today.
Read less
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Edwin from Fulton, NY
Parts Used:
4342528
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
The oven burner would not light
Replace the ignition glowbar. Remove the drawer below the oven and disconnect the 2-wire plug near the back of the unit. Then open the oven and remove the racks. Release the 2 screws that hold the bottom plate of the oven in place and, lifting from the back of the oven, remove the bottom plate. You are now looking at the burner distrib utor. Remove the 2 retaining screws near the front of the oven and, with an upward motion, pull the distributor toward you to free it from the back of the oven. Then push it away from you and remove it . The ignitor is now in view at the back of the oven on the right side of the burner. Remove the 2 retaining screws and pull the wires up through the hole in the bottom of the oven. Installation is simply reverse of this procedure.
Read less
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Bradford from Coopersville, MI
Parts Used:
4342528
Difficulty Level:
Very Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Wrench (Adjustable)
There was no slack to pull wire nuts out of the back of the oven so I had to remove the oven from built in.
The short aluminum tube was damaged in the removal. Tried to buy a new yellow flexible tube , nothing was compatible after five hardwares and home center visits. I then found brass fittings online to make the yellow tube work.. Wired in the igniter in the back. Piece of cake. If you have to move oven, be sure to bubble test the fittings.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jeanne from Tipton, IN
Parts Used:
4342528
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Socket set
Oven would not light
Removed the oven bottom by removing two screw, removed the diffuser by removing two screws, removed two screws and unplugged the igniter. Ordered the part in the afternoon and received it the next morning. Replaced in opposite order as removal. Oven lit
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Karen from Glen Burnie, MD
Parts Used:
4342528
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Oven wouldn't ignite.
Remove all grates and side brackets, pull bottom of the oven out and lift out tray to get access to oven and burner. Remove old igniter and installed new igniter per instructions.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
David from Prescott Valley, AZ
Parts Used:
4342528
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
oven igniter quit working
Remove oven racks, bottom oven plate, broiler drawer to get to existing igniter. Then unplugged the fit only-one -way igniter electrical connection, then remove igniter which is held in place with two 5/16 machine screws, obtained part number, checked local department store on price, checked internet pricing and selected this site for th e item.
When part arrived removed from package, installed the reverse of removal then tested by turning on oven and new part did what it was meant for -ignite the oven burner.
Works great!
Read less
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
★ Customer Reviews
Average Rating: (2 Reviews)
4.0
★★★★★
★★★★★
Filter By Rating:
  • 1
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Allan L - March 20, 2021
Verified Purchase
Acceptable Part
Worked as expected.
★★★★★
★★★★★
Vicky And Douglas B - August 7, 2020
Verified Purchase
Getting here later then paid for
The part was just what we order but the delivery I was upset with. I paid extra money to get my part to me sooner since it was a oven part. I got it later then the normal rate wasted money to get it here sooner

Model Compatibility

This part works with the following models:
Fix Number: FIX360921
Manufacturer Part Number: 4342528
Brand Model Number Description
Roper 1028B06 Range - Roper Range/Stove/Oven Model 1028B06 Parts
Roper 1028B16 Range - Roper Range/Stove/Oven Model 1028B16 Parts
Roper 1028B26 Range - Roper Range/Stove/Oven Model 1028B26 Parts
Roper 1028B46 Range - Roper Range/Stove/Oven Model 1028B46 Parts
Whirlpool 1259A16 Range - Whirlpool Range/Stove/Oven Model 1259A16 Parts
Whirlpool 1259A26 Range - Whirlpool Range/Stove/Oven Model 1259A26 Parts
Whirlpool 1259C16 Range - Whirlpool Range/Stove/Oven Model 1259C16 Parts
Whirlpool 1259C26 Range - Whirlpool Range/Stove/Oven Model 1259C26 Parts
Whirlpool 1259H16 Range - Whirlpool Range/Stove/Oven Model 1259H16 Parts
Whirlpool 1259H26 Range - Whirlpool Range/Stove/Oven Model 1259H26 Parts
Whirlpool 1259L16 Range - Whirlpool Range/Stove/Oven Model 1259L16 Parts
Whirlpool 1259L26 Range - Whirlpool Range/Stove/Oven Model 1259L26 Parts
Whirlpool 1259W16 Range - Whirlpool Range/Stove/Oven Model 1259W16 Parts
Whirlpool 1259W26 Range - Whirlpool Range/Stove/Oven Model 1259W26 Parts
Roper 1348A06 Range - Roper Range/Stove/Oven Model 1348A06 Parts
Roper 1348A16 Range - Roper Range/Stove/Oven Model 1348A16 Parts
Roper 1348A26 Range - Roper Range/Stove/Oven Model 1348A26 Parts
Roper 1348A46 Range - Roper Range/Stove/Oven Model 1348A46 Parts
Roper 1348A56 Range - Roper Range/Stove/Oven Model 1348A56 Parts
Roper 1348C06 Range - Roper Range/Stove/Oven Model 1348C06 Parts
Roper 1348C16 Range - Roper Range/Stove/Oven Model 1348C16 Parts
Roper 1348C26 Range - Roper Range/Stove/Oven Model 1348C26 Parts
Roper 1348C46 Range - Roper Range/Stove/Oven Model 1348C46 Parts
Roper 1348C56 Range - Roper Range/Stove/Oven Model 1348C56 Parts
Roper 1348H06 Range - Roper Range/Stove/Oven Model 1348H06 Parts
Roper 1348H16 Range - Roper Range/Stove/Oven Model 1348H16 Parts
Roper 1348H26 Range - Roper Range/Stove/Oven Model 1348H26 Parts
Roper 1348H46 Range - Roper Range/Stove/Oven Model 1348H46 Parts
Roper 1348H56 Range - Roper Range/Stove/Oven Model 1348H56 Parts
Roper 1348H66 Range - Roper Range/Stove/Oven Model 1348H66 Parts
Range Round Carborundum Oven Igniter
$ 67.93
  In Stock
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.