Frigidaire/Frigidaire_Thumb/7XQ1HFP4.gif
See part F37 in the diagram
Replacing your Kenmore Range Oven Temperature Sensor play video
( Grid squares measure 1x1 inch )

Oven Temperature Sensor

$48.65
Fix Number: FIX1528543
Manufacturer #: 316490001
Manufactured by: Frigidaire

Product Description

This temperature sensor detects the temperature within the oven cavity.

Videos For installing this part.

Replacing your Oven Temperature Sensor

Replacing your Oven Temperature Sensor play video
Questions and Answers

Questions and Answers

Be the first to ask our experts a question about this part!

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.9 / 5.0, 7 reviews.
    Sort by:
    Sorry, we couldn't find any existing installation instruction that matched.
    • Customer:
      Rick E from BOYNTON BEACH, FL
    • Parts Used:
      316490001
    • Difficulty Level:
      Easy
    • Total Repair Time:
      30 - 60 mins
    • Tools:
      Nutdriver, Pliers
    Intermittent F-30 error.
    Pull Oven away from wall and disconnect power.
    Remove back panel for access to sensor and wiring/connector.
    Disconnect sensor connector.
    Remove old sensor and insert new one into place.
    If the connector does not match (as mine didn't), cut and strip sensor wires and connect to service wires with heat resistant wire nuts.
    Secure wiring appropriately and replace back panel.
    Connect power and re-position oven.
    2 of 2 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    • Customer:
      Berry from denver, NC
    • Parts Used:
      316490001
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      Less than 15 mins
    • Tools:
      Nutdriver
    oven was over heating
    Ture power off pull stove out from the wall remove the screws from back panel with a 1/4 inch nutdriver unplug sensor remove the screw pull sensor out and slide the new one in and reverse the process.
    1 person found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    • Customer:
      Gerald from Winthrop, WA
    • Parts Used:
      316490001
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      30 - 60 mins
    • Tools:
      Screw drivers
    old temp stove wire had previously been cut by previous owner
    removed the double oven and spliced the wires
    0 of 1 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    • Customer:
      Kenneth from Drake, ND
    • Parts Used:
      316490001
    • Difficulty Level:
      Very Easy
    • Total Repair Time:
      Less than 15 mins
    • Tools:
    no oven temp control
    removed rear panel unplugged sensor removed mounting screw replaced sensor.20 minutes!
    0 of 1 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    • Customer:
      Monty from Kings Mountain, NC
    • Parts Used:
      316490001
    • Difficulty Level:
      Easy
    • Total Repair Time:
      15 - 30 mins
    • Tools:
    Run away temperature
    Pulled range out which needed to be cleaned behind anyway...disconnected power cord from outlet...removed rear panel from stove to access part.....disconnected plug from old part simple disconnect...removed old part replaced with new...new part wasn't same simple plug as new...spliced old disconnect to new part simple as that replaced oven rear panel plugged power back in working great so far and did a much needed cleaning behind stove
    0 of 1 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    • Customer:
      John from Perryton, TX
    • Parts Used:
      316490001
    • Difficulty Level:
      Easy
    • Total Repair Time:
      1- 2 hours
    • Tools:
      Screw drivers
    oven overheating and would not turn off w/o unplugging it
    This repair can be done much quicker and easier than I did it. I started out by removing trim to get to the control board. This was not necessary. First i pulled the oven door. Remove 2 screws and keepers above hinges, set door to broil position and lift up. Door will pull up and off. With this out of the way, find 4 screws on outter edge that hold oven to the wall. Dont confuse these with the screws that look the same as the ones you pull to remove the door, these screws have a smaller head and are closer to the outside. Once these screws are removed, find a helper, and with one person on each side, pull the oven out of the wall. It will be helpful if you have a table or sawhorses prepared to sit the oven on. Once the oven is removed from the wall, look inside the oven & find the old temp sensor (mine was in top left hand corner). Remove the 2 screws that hold it in place. Now go to back of oven and trace the wires coming from the temp sensor to where it plugs in. Remove old sensor, but do not discard ! In my case (as many others). I had to cut the old plug off and solder it on the new sensor. I used heat shrink to cover solder splice. Replace oven and door in reverse order of removing. Fixed my oven for $25-$30 verses spending $900 for a new one !
    0 of 1 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    • Customer:
      Dwight from Clinton, MD
    • Parts Used:
      316490001
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      15 - 30 mins
    • Tools:
      Nutdriver
    oven not reaching proper temperature
    Ordered Oven Temperature Sensor, unplug oven from power source remove back panel with nut driver. Splice wires from new part and had to splice wires coming from stove. Install with wire nuts and replace oven sensor reinstall back panel and plug oven into power source, tested oven with oven temperature gauge, oven works fine. Easy to repair.
    0 of 1 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
      Model Compatibility
      This part works with the following models:
      Fix Number: FIX1528543
      Manufacturer Part Number: 316490001
      Brand
      Model Number
      Description
      Kenmore
      79015032500
      Wall Oven
      Kenmore
      79046814991
      Range - Kenmore Range/Stove/Oven Model 790.46814991 (79046814991, 790 46814991) Parts
      Kenmore
      79046819991
      Range - Kenmore Range/Stove/Oven Model 790.46819991 (79046819991, 790 46819991) Parts
      Kenmore
      79078510400
      Range
      Kenmore
      79078510401
      Range
      Kenmore
      79078510403
      Range
      Kenmore
      79078510404
      Range
      Kenmore
      79078511400
      Range
      Kenmore
      79078511401
      Range
      Kenmore
      79078511403
      Range
      Kenmore
      79078511404
      Range
      Kenmore
      79078520400
      Range
      Kenmore
      79078520401
      Range
      Kenmore
      79078520403
      Range
      Kenmore
      79078520404
      Range
      Kenmore
      79078521400
      Range
      Kenmore
      79078521401
      Range
      Kenmore
      79078521403
      Range
      Kenmore
      79078521404
      Range
      Kenmore
      79078530400
      Range
      Kenmore
      79078530600
      Range
      Kenmore
      79078531400
      Range
      Kenmore
      79078531600
      Range
      Kenmore
      79078540600
      Range
      Kenmore
      79078541600
      Range
      Kenmore
      79078572400
      Range
      Kenmore
      79078572401
      Range
      Kenmore
      79078572404
      Range
      Kenmore
      79078572405
      Range
      Kenmore
      79078572406
      Range