Terminal Block Kit WB17T10011
$56.67
In Stock
- Fix Number:
- FIX953027
- Manufacturer #:
- WB17T10011
- Manufactured by:
- GE
Jump to:
Product Description
This part provides a way of connecting individual electrical wires and offers protection of the device from electrical surges (voltages and/or currents).
-
Works with the following brands:General Electric, Hotpoint, Kenmore
-
Works with the following products:Range, Wall Oven, Microwave Oven Combo, Cooktop
-
Fixes the following symptoms:Will Not Start, Element will not heat
-
Part# WB17T10011 replaces these:AP3736048, 1085735, WB17T10012, WB17T10015, WB17T10016, WB17T10023
- Works with the following brands:
- General Electric, Hotpoint, Kenmore
- Works with the following products
- Range, Wall Oven, Microwave Oven Combo, Cooktop
- Fixes the following symptoms
- Will Not Start, Element will not heat
- Part# WB17T10011 replaces these:
- AP3736048, 1085735, WB17T10012, WB17T10015, WB17T10016, WB17T10023
Part Number Cross Reference
Questions and Answers
Be the first to ask our experts a question about this part!
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts Additional or alternate parts to consider.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
- Customer:
- Bill from CAPE CORAL, FL
- Parts Used:
- WB17T10011
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver
Loose neutral lug on the load side of the terminal bar
Took the back cover off. The neutral wire lug had never been tightened from the factory and finally sparked and melted the plastice holding the neutral lug load side. I replaced the terminal bar to correct the situation.
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kenneth from Fruitland, UT
- Parts Used:
- WB17T10011
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Pliers, Screw drivers
Terminal Block ASM was burned up.
I took off the back cover and replaced it. It had melted and needed to be broken apart to get the mounting screws out of the old one. I had to replace some connections that had also burned. I at first thought that it was the plug on the machine and on the wall. I also replaced those just in case. It was a lot cheaper to replace parts than
... Read more
to buy a new range. I still have no idea how it got so hot back there to burn the Terminal block ASM. Next time, please send the mounting screws. I cut my hand breaking them out of the burned part.
Read less
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX953027
Manufacturer Part Number: WB17T10011
Manufacturer Part Number: WB17T10011
Brand
Model Number
Description
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.