GE/GE_Thumb/00115410i01.gif
See part 3 in the diagram
Replacing your General Electric Range Surface Burner Switch - 8 Inch - 2500W play video
( Grid squares measure 1x1 inch )

Surface Burner Switch - 8 Inch - 2500W

★★★★★
★★★★★
1 Review
$40.67
Fix Number: FIX236750
Manufacturer #: WB24T10025
Manufactured by: GE

Product Description

If your burner element is not turning on or heating up, it is possible there is an issue with the switch. The surface burner switch, also known as an infinite heat switch, is what turns your burner elements on and off, along with adjusting the temperature settings. The switch is controlled by the knob on the panel, and this knob sits on the shaft for the switch. Please note that burner knobs are sold separately from the switch. Before beginning this repair, you will need to disconnect the power supply to your range, and move it away from the wall so you can access the back panel. A helpful tip to keep your wires straight, is as you remove one from the old switch, immediately attach it to the same terminal on the new switch. If the connection is snug, a pair of needle nose pliers will help. This OEM replacement switch is designed to work with your 8-inch burner elements.

Videos For installing this part.

Replacing your Surface Burner Switch - 8 Inch - 2500W

Replacing your Surface Burner Switch - 8 Inch - 2500W play video
Questions and Answers

Questions and Answers

Be the first to ask our experts a question about this part!

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 4.5 / 5.0, 11 reviews.
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
  • Customer:
    Brigid from GLENCOE, MN
  • Parts Used:
    WB24T10025
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
The original switch had leakage, the pilot lamp stayed on, and the burner stayed warm.
I strongly suggest anyone who doesn't have experience doing appliance repair watch the Fix.com video with a guy who really knows what he's doing showing exactly how to do it.

https://www.youtube.com/watch?v=bHprnykxmyQ
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Bryant from CAMDENTON, MO
  • Parts Used:
    WB24T10025
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Burner would not keep even heat. One moment was at low heat then surges to very high heat without touching the burner control.
Step 1: disconnected power Step 2: removed upper rear panel Step 3: removed control knob Step 4: removed two screws Step 5: plugged in wires from old unit to new unit. Step 6: reinstall new control and tighten two screws Step 7: reinstall control knob.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burt up reveptiical and blown switch
I just want to say thanks to this site for making access to these parts and self repairs. So easy. This was a great experience so self fulfilling and I saved a ton of money. Thank you .
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    James from Shelbyville, KY
  • Parts Used:
    WB24T10025
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers
Had to replace burner switch
Very easy just took the top cover off the back , unscrewed two screws holding the switch ,and replaced the wires one at a time from the old switch to the new one, so they were easy to keep in order.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    marty from walnut cove, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Burner light staying on. front right burner staying on all the time.
Replaced burner switch . Trip breaker for range.Pull stove from wall remove six screws from back panel. Remove four wires from switch swap one at a time to new switch. Remove 2 screws from old switch reinstall in new switch cut power back on job done very simple.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    christopher from elk grove village, IL
  • Parts Used:
    WB24T10025
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
Burner stayed red
Pull oven away from the wall. UNPLUG THE OVEN. Use 1/4" bit to remove 5 screws from upper sheet metal guard on back of stove and set it aside. Connect wires one at a time from old bad switch to new one. Look at the numbers on the connectors as you go. Hard to see them, but the numbers are there and they have to match. Remove the two (tiny) screws on the front of the control panel that hold the old switch. Get the old switch out of the way, insert the shaft of the new switch in the hole in the panel, and secure it with the two tiny screws you probably dropped into the burner. Plug it back in, push it back to the wall, and cross your fingers. That's what I did and it worked perfectly.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Murle from Greeneville, TN
  • Parts Used:
    WB24T10025
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
8" eye on stove would go full blast red hot on a low setting
First note: Large eyes have same controllers, small eyes have same controllers. Look at their Amperage ratings and dont swap them around incorrectly. Take off rear panel, unplug wires after marking them, replace. EASY.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Joseph from Beverly Hills, FL
  • Parts Used:
    WB24T10029, WB24T10025
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
Burner temperature difficult to control
Turn the breaker to off position then.remove (2) button head screws at the bottom of the panel then .pull the range away from the wall. Remove knobs and (2) screws at the top of the control panel. Pull the control panel toward you to expose the burner switches. Remove (2) screws off the burner switch. Remove one connecting wire at a time and transfer it to the new switch.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Terrence from ozark, MO
  • Parts Used:
    WB24T10025
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers, Socket set
switch stayed on high.
Turned off power, removed top panel , replaced switch. 2 screws on bottom 4 on back side.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Miranda from Liberty, MO
  • Parts Used:
    WB24T10025
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Pliers
The burner element would heat higher than the setting
Followed the steps in the video. It really was that easy. It took more time to put the range back in it's place than to actually change the switch.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating: (1 Review)
5.0
★★★★★
★★★★★
Filter By Rating:
  • 5
    1
  • 4
    0
  • 3
    0
  • 2
    0
  • 1
    0
    Sort by:
    Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
      Model Compatibility
      This part works with the following models:
      Fix Number: FIX236750
      Manufacturer Part Number: WB24T10025
      Brand
      Model Number
      Description
      General Electric
      15451-0
      Range
      General Electric
      154510
      Range
      General Electric
      155910
      Range
      Kenmore
      91192502990
      Range
      Kenmore
      91192502991
      Range
      Kenmore
      91192502992
      Range
      Kenmore
      9119250799
      Range - Kenmore Range/Stove/Oven Model 911.9250799 (9119250799, 911 9250799) Parts
      Kenmore
      91192507990
      Range
      Kenmore
      91192507991
      Range
      Kenmore
      91192507992
      Range
      Kenmore
      91192712020
      Range
      Kenmore
      91192714020
      Range
      Kenmore
      91192812300
      Range
      Kenmore
      91192812301
      Range
      Kenmore
      91192814300
      Range
      Kenmore
      91192814301
      Range
      Kenmore
      91193490010
      Range
      Kenmore
      91193490300
      Range
      Kenmore
      91193491990
      Range
      Kenmore
      91193491991
      Range
      Kenmore
      91193498990
      Range
      Kenmore
      91193498991
      Range
      Kenmore
      91193501990
      Range
      Kenmore
      91193501991
      Range
      Kenmore
      91193508990
      Range
      Kenmore
      91193508991
      Range
      Kenmore
      91193512010
      Range
      Kenmore
      91193514010
      Range
      Kenmore
      91193581990
      Range
      Kenmore
      91193581991
      Range