Part Location Diagram of WB24X10130 GE Light Switch
See part 24 in the diagram
( Grid squares measure 1x1 inch )

Light Switch WB24X10130

★★★★★
★★★★★
1 Review

Rated by 3 customers 

?

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

?
$18.85
In Stock
Fix Number:
FIX953546
Manufacturer #:
WB24X10130
Manufactured by:
GE

Product Description

This is the replacement light switch for your range. It comes with the actual switch, and the hex nut that goes with it. The switch is approximately 1 ¼ inches by 1 ¼ inches, and the hex nut is approximately ½ an inch in diameter. When you press the switch, it allows you to turn the range light on and off. If the light does not come on when you hit the switch, you may need to replace it. Be sure to disconnect your microwave from the power source before you begin this repair. This part is an authentic OEM part sourced directly from the manufacturer.

Questions and Answers

Be the first to ask our experts a question about this part!

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.6 / 5.0, 3 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Thomas from Wildwood Crest, NJ
Parts Used:
WB24X10130, WB24X10129
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
plastic stems broke replaced both switches
Turn off circuit breaker to vent hood. Note how narrow wire channel cover fits into switch cover underneath hood. Remove range burners and sit on range facing switch cover for access to screws with small Phillips head screwdriver. Remove both back wire cover and switch cover screws. Remove covers. Remove plastic control knobs on front by pulling straight off. Do not twist. With pliers or wrench remove two locking nuts. Light switch has three wires. Fan switch has four. Note wire colors and corresponding numbered slots on back of switch. Using end of large paper clip push into wire slot behind wire to loosen spring tension and carefully pull wire straight out. Do all wires in one switch at a time. Keep wire end straight and insert into correct numbered slot on new switch. Do not overtighten locking nuts upon reassembly. Replace knobs. Screw switch cover back on and then narrow wire cover. Turn circuit breaker on. Test new switches.
14 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Phil from Clearwater, FL
Parts Used:
WB24X10130
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Range Hood light switch was broken off at the screw thread that comes through the housing.
Cut the power to the unit by turning off the breaker on the panel. Then pulled off the knob for the light switch. From under the inside of the hood I used a Phillips head screw driver to remove the two metal screws securing the wire housing cover plate. This gave access to the broken switch. Sliding a very small straight slot screwdrive r in the small slot beside the wire in the broken switch housing, this releases the wire and you pull it out. I did it one at a time, inserting the wire in the corresponding spot in the new switch so no mixups. Put the switch through the housing put on the retaining nut (gently so as not to break the plastic thread) and put the housing back, and the knob on, and presto! It's fixed!
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robert from Mansfield, TX
Parts Used:
WB24X10130, WB17T10006, WB24T10025, WB1X500D
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers
Burt up reveptiical and blown switch
I just want to say thanks to this site for making access to these parts and self repairs. So easy. This was a great experience so self fulfilling and I saved a ton of money. Thank you .
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Customer Reviews
Average Rating: (1 Review)
5.0
★★★★★
★★★★★
Filter By Rating:
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Model Compatibility

This part works with the following models:
Fix Number: FIX953546
Manufacturer Part Number: WB24X10130
Brand Model Number Description
General Electric AV447FBS Range Hood
General Electric AV447FWS Range Hood
General Electric JV247P1WW Range Hood
General Electric JV248P1SS Range Hood
General Electric JV347H1BB Range Hood - Electric
General Electric JV347H1CC Range Hood - Electric
General Electric JV347H1WW Range Hood - Electric
General Electric JV347H2BB Range Hood
General Electric JV347H2CC Range Hood
General Electric JV347H2WW Range Hood
General Electric JV348L1SS Range Hood - Electric
General Electric JV348L1SSC Range Hood
General Electric JV348L2SS Range Hood
General Electric JV367H1BB Range Hood - Electric
General Electric JV367H1CC Range Hood - Electric
General Electric JV367H1WW Range Hood - Electric
General Electric JV367H2BB Range Hood
General Electric JV367H2CC Range Hood
General Electric JV367H2WW Range Hood