OEM Pro Temp Parts & Accessories

Filter Kit

$18.69

Fix Number: FIX10469007
Manufacturer Part Number: 70-054-0100

This part is sourced directly from Pro Temp and is an OEM approved replacement part for certain Kerosene/Diesel Forced Air Heaters manufactured by Pro Temp, Heat Hog, Heat Stream, and Master. For full compatibility, please see the "Model Cross Reference List" below. The filter is responsible for preventing dust and debris from entering and damaging the motor assembly. These filters must be changed with regular use; we recommend replacing them every 6 months to 1 year, depending on the frequency of use. If your heater begins to perform poorly, it likely is time to change the filters. Kits are sold individually, and each kit contains the intake, output, and lint filters.

Drain Valve

$3.99

★★★★★

2 Reviews

Fix Number: FIX10468912
Manufacturer Part Number: 70-002-0105

This part is sourced directly from the manufacturer and is an authentic OEM replacement part. This part is compatible with many kerosene and diesel heaters manufactured by Heat Hog, Heat Stream, Master, Pro Temp, and Sun-Stream. For full compatibility, please see the "Model Cross Reference List" below. This part ensures an airtight seal to prevent fuel from leaking out of your heater. If your heater is leaking from the drain plug, or if the plug has become cracked, it is time to replace the plug. This plug is approximately 2" in length and 1" tall. The Drain Valve is also frequently referred to as a Drain Plug, a Fuel Valve, and a Fuel Plug. Each valve is sold separately.

Installation Instructions

Michael from Sherburne, NY

The original drain plug failed

I used a pair of wire cutters in re.ove the original plug being careful not to damage the metal tank.
I placed a small amount of light oil on the new plug and pressed in into place with my thumb usi g a twisting motion as I pushed.
I did still a good amount of fuel as I turned the unit over even though I did drain it as much as possibl.
Standing it on its end might have prevented this.
Part fit perfectly!!!! Read more...

Spark Plug Kit

$13.70

Fix Number: FIX10469005
Manufacturer Part Number: 70-052-0200

Designed for Pro Temp Heaters, this OEM approved replacement Spark Plug is compatible with many models of Pro Temp, Heat Hog, Heat Stream, and Master Heaters. For full compatibility, please see the "Model Cross Reference List" below. If your heater does not turn on, you may have a faulty Spark Plug. This Spark Plug is approximately 3" in length, and the kit includes the bolt and washers needed for installation. Each Kit is sold separately.

Photocell Assembly

$15.52

Fix Number: FIX17016835
Manufacturer Part Number: 70-016-1000

Photocell Assembly

Thermostat Limit Control

$3.99

Fix Number: FIX10468949
Manufacturer Part Number: 70-019-0100

Air Line

$6.23

Fix Number: FIX10468983
Manufacturer Part Number: 70-035-0300

Ignitor (Updated)

$70.99

★★★★★

3 Reviews

Fix Number: FIX12051602
Manufacturer Part Number: 70-037-0350

This is a genuine replacement part sourced directly from Pro Temp. It is compatible with multiple models of Heaters manufactured by Pro Temp, Heat Hog, Heat Stream, and Master. To ensure your Heater is compatible with this part, please see the "Model Cross Reference List" below. The Ignitor is responsible for lighting the heater if your heater will no longer light properly, but the gas is flowing, you may need a new Ignitor. Each Ignitor is sold individually. NOTE: This is the latest version of the part, a plug adapter (Part #70-037-5000) may be required depending on your model.