DeWALT Table Saw Brushes

Fix Number

FIX10170261

Manufacturer Part Number

381028-08

This carbon brush fits a variety of gardening and lawn tools. The brush is a common replacement part and can easily fix most motor malfunctions. This brush comes with a wire lead and a connection terminal. Inspect the wire lead for any damage and replace immediately if burns or cracks are noticed. Refer to the diagram provided by the manufacturer for installation instructions.

Fix Number

FIX16687899

Manufacturer Part Number

N558583

This is a genuine Dewalt replacement part, it is sold individually. Worn brushes are often the cause of a poorly running motor • Replacing brushes can fix an intermittent motor • New brushes can restore a motor's electric braking Carbon motor brushes are one of the most commonly replaced power tool components. Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power. A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.

Fix Number

FIX10177102

Manufacturer Part Number

5140033-19

This part includes one carbon brush with a wire lead and brush spring attached. A strong indication that the carbon brush might need to be replaced is if your equipment will not turn on or there are excessive sparks present. This is a common wear part that will require replacement from time to time. It is also a good idea to inspect the armature at the same time, especially in the case of excessive sparks.

★★★★★

★★★★★

1 Review

Fix Number

FIX10166057

Manufacturer Part Number

145323-06

This carbon brush and spring kit includes a carbon brush, wire lead, and a spring. The parts fit a variety of tools such as saws. If you notice your motor is running poorly or is intermittent, then check the brush for damage, cracks, and burns. It is common to replace the brushes repeatedly as they easily wear off from friction and use. Tip: remember to inspect your armature for burns and cracks when replacing your carbon brushes. This will help identify larger motor problems. This part measures to 3/4 inches in length, 1/2 inches in width, and the 1/4 inches in thickness. Refer to the manual for installation instructions and a list of the parts included.

Fix Number

FIX16689135

Manufacturer Part Number

N713244

Fix Number

FIX10166161

Manufacturer Part Number

147097-09

This is a genuinely sourced carbon brush and holder. This carbon brush includes the holder, terminals, and spring, making it ready for installation. Consider replacing both brushes at the same to ensure even wear and peak motor performance. Be sure to inspect the carbon brushes frequently to keep your equipment running smoothly for years to come.

Fix Number

FIX10177103

Manufacturer Part Number

5140033-20

It is an authentic manufacturer sourced replacement brush holder which is specially designed for use with DeWALT power tools. This part holds carbon brush around the armature providing stable contact. It is made of high-quality plastic with metal and it is sold individually, please note carbon brushes are sold separately.

Fix Number

FIX10171135

Manufacturer Part Number

389512-01

This is an authentic manufacturer sourced brush ring assembly. It is specially made for use on Dewalt saws. This part holds carbon brushes around the armature to provide a safe contact. This assembly consists of a plastic holder ring, two (2) metal brush holders with springs and two (2) carbon brushes with lead wires attached. To replace this assembly you will need a screwdriver.

Fix Number

FIX12464803

Manufacturer Part Number

5140084-07

This manufacturer supplied replacement brush is designed for use with Porter Cable saws. This assembly includes one (1) carbon brush with lead wires and springs attached. Please note brush holder and cover are sold separately. Due to continuous contact with an armature brushes will wear down and would need to be replaced. It is advised to replace both brushes at the same type. You would need a screwdriver to complete this job. • Make sure the unit is unplugged • Remove brush cap • Remove old brush and secure the new one • Secure brush cap and test the tool

Fix Number

FIX17788352

Manufacturer Part Number

N796713