OEM Ridgid Reciprocating Saw Parts & Accessories

Shoe Release Lever

$6.51

Fix Number: FIX11867229
Manufacturer Part Number: 307113001

Bearing Ball 608zz

$6.40

Fix Number: FIX11858686
Manufacturer Part Number: 680141022

Genuine Manufacturer Approved replacement part used on a variety of Power Tools. This Ball Bearing has multiple applications depending on your tool. This part is made out of Metal and it is Sold Individually. Ball Bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. This reduces wear on the tool and allows it to run smoothly. Bearings experience constant wear when the tool is in operation from pressure, heat, vibration and friction. Because of this, many Bearings need periodic maintenance or replacement. To replace this Bearing you would need a Screwdriver and a Set of Wrenches.

Brush Cap

$6.51

Fix Number: FIX10098112
Manufacturer Part Number: 516851001

This manufacturer sourced replacement part designed for use on Ridgid power tools. The purpose of the brush cap is to hold the brush in the tool. This cap has external threads that thread into the housing of the tool. Be careful when removing and replacing these, they have a tendency to break. This item is made out of plastic and it is sold individually. You would need a flathead screwdriver to install or remove this brush cap.

BEND RELIEF

$2.99

Fix Number: FIX18696087
Manufacturer Part Number: 560963001

This is an original Ridgid replacement part manufactured for use with power tools. This bend relief is used to protect the power cord where it enters the tool which is a common stress point for the cord. This bend relief is sold individually.

BRUSH ASSEMBLY

$2.99

★★★★★

1 Review

Fix Number: FIX18693570
Manufacturer Part Number: 290848001

This is a genuine Ridgid replacement part. It is sold individually, 2 are needed to make a set. Worn brushes frequently are the cause behind a motor running poorly. • Replacing brushes can fix a motor that's operating intermittently. • Parts are sold individually • New brushes can restore a motor's electric braking. Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.

Shoe Assembly

$9.54

Fix Number: FIX10095220
Manufacturer Part Number: 302371001

This is an authentic Ridgid replacement part manufactured for use with reciprocating saws. The metal shoe is used to press against the cutting material to guide the blade through the cut. This shoe assembly is sold as an individual replacement part.

ASSEMBLY SWITCH & LED BC

$24.73

Fix Number: FIX18693389
Manufacturer Part Number: 270015207

PIN SHOE

$6.51

Fix Number: FIX18698628
Manufacturer Part Number: 672196001

This is an original replacement part sourced directly from the manufacturer. The shoe pin is found in a compact orbital reciprocating saw from Ridgid. This part is made of metal, and is used to secure the shoe retainer in the shoe assembly. Please be aware that there are different pins used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You may require pliers or a punch set when replacing this item. This is an individually sold part.

ASSEMBLY BLADE CLAMP

$31.72

Fix Number: FIX18691977
Manufacturer Part Number: 203520001

ASSEMBLY SHOE

$11.79

Fix Number: FIX18694005
Manufacturer Part Number: 306340001

This is an authentic OEM replacement part that is sourced directly from the original parts manufacturer for use with a Rigid Reciprocating Saw. The shoe assembly rests against the material being cut and provides support to the saw blade. This part is also adjustable for use with different lengths of cuts. This shoe assembly is made of metal and is an individually sold part.

Ridgid Reciprocating Saw Parts

Popular Ridgid Reciprocating Saw Parts

Ridgid Reciprocating Saw Appliance Types

Related Ridgid Reciprocating Saw Parts

Popular Ridgid Reciprocating Saw Models

Ridgid Reciprocating Saw Parts

Start With Your Model Number

Popular Ridgid Reciprocating Saw Parts

Ridgid Reciprocating Saw Appliance Types

Related Ridgid Reciprocating Saw Parts

Popular Ridgid Reciprocating Saw Models