OEM Porter Cable Miter Saw Parts & Accessories

BRUSH ASSY.

$19.79

Fix Number: FIX12464803
Manufacturer Part Number: 5140084-07

This manufacturer supplied replacement brush is designed for use with Porter Cable saws. This assembly includes one (1) carbon brush with lead wires and springs attached. Please note brush holder and cover are sold separately. Due to continuous contact with an armature brushes will wear down and would need to be replaced. It is advised to replace both brushes at the same type. You would need a screwdriver to complete this job. • Make sure the unit is unplugged • Remove brush cap • Remove old brush and secure the new one • Secure brush cap and test the tool

Switch

$83.98

Fix Number: FIX12021801
Manufacturer Part Number: 899883

This is an original replacement part manufactured for use with miter saws. Switches wear out from normal use, and are one of the first parts to break down on power tools. Replacing a worn out switch can be an easy fix, and extend the life of the saw. A screw driver is required to install the switch, please note the switch is sold individually.

115V CORD

$26.50

Fix Number: FIX18986769
Manufacturer Part Number: 825713

This is a Porter Cable replacement part designed for use with many power tools. The 115V cord is constructed of metal wiring encased in plastic and durable rubber. The cord is designed to connect the device to electricity once plugged into an outlet. This part is sold individually. Soldering tools are needed to make the proper replacement. Please refer to manual and diagrams for specific repair instructions.

Brush Pair

$26.19

Fix Number: FIX10188363
Manufacturer Part Number: N097997

This replacement carbon brush pair is specially made for a Dewalt chop saw. It is an authentic OEM sourced item, not an aftermarket imitation. This item includes (2) carbon brushes with lead wires and springs attached. You will need a screwdriver to complete this repair.

BLADE WRENCH

$6.51

Fix Number: FIX18981420
Manufacturer Part Number: 488905-00

This is an authentic Porter Cable replacement part, sourced from the original manufacturer for use with miter saws. The special blade wrench is commonly used when changing the miter saw's blade. Most miter saw blade bolts are left hand threaded and to loosen the bolt the wrench needs to be turned clockwise, please consult the saw's owner's manual. This blade wrench is available as an individual replacement part.

BRUSH

$6.51

Fix Number: FIX18988071
Manufacturer Part Number: 90512450

It is a genuine item that is supplied by the original equipment manufacturer for use with Black and Decker, Delta and Porter Cable compound miter saws. The purpose of a carbon brush is to conduct the current in an electric motor by maintaining contact with an armature, over time it will wear away and begin to crack eventually requiring a replacement. This durable carbon brush is sold individually, keep in mind the brush holder is sold separately. It is advised to replace both carbon brushes at the same time.

CORD KIT

$32.61

Fix Number: FIX18982312
Manufacturer Part Number: 5140113-88

This cord is an authentic Porter Cable replacement part and is sold individually. It is made with tough, thick rubber insulation for a long service life. rnPower Cord Specifications: • 2 Prongs • 2 Wires • 14 Gauge • 10 Feet Long

Installation Instructions

Jeff from WISC RAPIDS, WI

Strain reliever broken at base of saw. Core frayed.

1. Unplug saw. 2.Examine and determine which parts need to be removed to gain access to switch. 3.Remove screws one at a time and placed in dish keeping track of size and length of where removed from handle. 4. Slowly pull handle apart exposing switch and wires. 5. Remove screws holding black and white wires keeping track of which wire goes where. 6. Thread new power cord the same way the old one was positioned though the handle and reassemble. Read more...

Miter Saw Brush

$26.03

Fix Number: FIX12021560
Manufacturer Part Number: 1348266

This is an OEM replacement carbon brush, sold individually. To ensure your motor is running smoothly and efficiently, it is advised to inspect the carbon brushes every few months, as they are prone to regular wear. The carbon brush has an important job of conducting electrical current, so if worn, your tool will not function as it should. If your tool is smoking or burn marks are present, it is advisable to also check the condition of the armature, as this could indicate more serious motor problems.

GUARD SPRING

$6.51

Fix Number: FIX18981441
Manufacturer Part Number: 490926-00

This conical compression spring that is sold individually. It is an authentic Porter Cable replacement part.

Watch the install video

Power Cord

$40.44

Fix Number: FIX10169913
Manufacturer Part Number: 330079-98

It is constructed with tough, thick outer rubber insulation for a long service life. Power Cord Specifications: • 2 Prongs • 2 Wires • 14 Gauge • 10 Feet Long

Porter Cable Miter Saw Parts

Popular Porter Cable Miter Saw Parts

Installation Instructions

Porter Cable Miter Saw Appliance Types

Popular Porter Cable Miter Saw Models

Porter Cable Miter Saw Parts

Start With Your Model Number

Popular Porter Cable Miter Saw Parts

Installation Instructions

Porter Cable Miter Saw Appliance Types

Popular Porter Cable Miter Saw Models