OEM Milwaukee Jig Saw Parts & Accessories

Carbon Brush (Sold Individually)

$4.99

Fix Number: FIX10122113
Manufacturer Part Number: 22-16-0275

This is a carbon brush, it is also known as a motor brush, and it is used with various power tools and equipment. The brush transfers electric currents to the motor. Your motor brush is an extremely common replacement part. It is considered a wear part, because the constant friction will wear it down. If you are experiencing a poor running motor, you will need to replace this part. New brushes will restore your motors electric braking. We recommend also inspecting your armature for damaging cracks or burns, this can indicate a larger problem in your motor that will require attention.

Carbon Brush/Lead (Sold Individually)

$5.89

Fix Number: FIX10122198
Manufacturer Part Number: 22-18-0710

This carbon brush lead or also known as a carbon motor brush fits the following tools: angle grinders, nibbler and shears, sander polishers, and jig saws. This includes the brush and a wire lead attached. This is one of the most commonly replaced power tool components because the carbon brushes easily wear off with friction and use. If your brush is worn out it can cause intermittent motor function, reduction in electric braking, and in motor power. If you notice burns and cracks on the wire lead, then it is best to replace this part. Tip: when replacing your carbon brush, make sure to inspect your armature for damage as well, in case there are larger motor problems.

Anti-Splintering Device

$4.99

Fix Number: FIX10130711
Manufacturer Part Number: 43-84-1030

The anti-splintering device is attached to your jigsaw base near the blade. It is purposely made out of a clear plastic, to enable you to see through it to correctly follow your cut line. The purpose of this part is to limit splintering and chip-out on cuts. It also stops thin pieces of wood from jamming between the blade and the plate while cutting. This is a very easy and quick repair that does not require any tools. Remove the old one by hand and align the new one and snap it into place. This authentic part is sold independently.

Cord Set

$12.69

Fix Number: FIX10122674
Manufacturer Part Number: 22-64-0215

This is a cord set for your power tools. It is constructed with a tough outer-rubber insulation for a longer life span. The 18-gauge power cord is 8 feet long, and comes with 2 prongs and 2 wires. This cord is black in color and is sold individually.

10-24 X 1/2" Pan HD. Torx Sem

$4.99

Fix Number: FIX10119071
Manufacturer Part Number: 06-82-8864

Brush Spring

$4.99

Fix Number: FIX10123380
Manufacturer Part Number: 23-52-0240

This is a brush spring for your power tools. It keeps the brush tight against the armature. Over time the carbon brush will wear down, and heat will be created. This could cause your spring to lose tension, and will then have to be replaced. For this part to be in great working condition, it needs tension to keep the brush tight. When you replace your carbon brushes we recommend replacing your brush spring for an even wear, and to keep the spring in perfect working condition. This part is made from metal and is sold individually.

20 Oz. Type "J" Grease

$61.67

Fix Number: FIX10134081
Manufacturer Part Number: 49-08-4220

8-16X5/8" Pan Sit. Plast Torx

$4.99

Fix Number: FIX10119015
Manufacturer Part Number: 06-82-7270

This Torx screw fits a variety of lawn and gardening tools. The screw has a diameter of 8, 16 thread counts, and 5/8 inches for the length. Refer to diagram provided by the manufacturer for further installation instructions.

Carbon Brush Set 4931381655

$12.82

Fix Number: FIX10122261
Manufacturer Part Number: 22-18-1500

Key Holder

$9.36

Fix Number: FIX10134032
Manufacturer Part Number: 48-66-4080

Milwaukee Jig Saw Parts

Popular Milwaukee Jig Saw Parts

Appliance Type

Popular Milwaukee Jig Saw Models

Milwaukee Jig Saw Parts

Start With Your Model Number

Popular Milwaukee Jig Saw Parts

Appliance Type

Popular Milwaukee Jig Saw Models