OEM Ryobi Circular Saw Parts & Accessories

Assembly Brush

$6.40

Fix Number: FIX11857088
Manufacturer Part Number: 290075051

This brush assembly is an authentic Ryobi item, it is not an aftermarket imitation. It is sourced directly from original equipment manufacturer for use with circular saws and electric cultivator. This assembly includes (1) metal brush holder and (1) carbon brush with a lead wire and a spring attached. It is advised to replace both brushes at the same type. Please note, the hardware to secure this assembly is sold separately. Replacing this brush assembly is a simple task that should only require a screwdriver.

Bearing Ball 608zz

$6.40

Fix Number: FIX11858686
Manufacturer Part Number: 680141022

Genuine Manufacturer Approved replacement part used on a variety of Power Tools. This Ball Bearing has multiple applications depending on your tool. This part is made out of Metal and it is Sold Individually. Ball Bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. This reduces wear on the tool and allows it to run smoothly. Bearings experience constant wear when the tool is in operation from pressure, heat, vibration and friction. Because of this, many Bearings need periodic maintenance or replacement. To replace this Bearing you would need a Screwdriver and a Set of Wrenches.

SWITCH

$12.91

Fix Number: FIX18699825
Manufacturer Part Number: 760677015

This is a genuine Ridgid part that is sourced from the original manufacturer to be used with circular saws. The special switch allows a user to turn the tool on and off. It is an identical replacement for a missing or a faulty part that is installed on a new tool. When performing this repair, make sure to refer to the owner's manual and the parts diagrams for your model. Note, the switch is made of durable materials and is sold as an individual item.

Ball Bearing (6000lu)

$6.40

Fix Number: FIX9868401
Manufacturer Part Number: 039176001012

It is an original manufacturer supplied replacement item and is sold individually. This ball bearing is sealed on both sides. Ball bearings are made to reduce friction between two rotating parts. Because they experience constant pressure they would need to be checked and replaced periodically to ensure top performance. Please check diagrams for correct location and application of this bearing.

Clamp Inner Blade

$6.51

Fix Number: FIX10082648
Manufacturer Part Number: 611791001

This replacement hardware that is sourced directly from original equipment manufacturer for use with Ryobi circular saws. The purpose of this inner blade washer is to help to secure the saw blade to the shaft. It is made of durable metal and it is sold individually, please note other components are all sold separately.

Washer Plastic Flat Nylon

$6.51

Fix Number: FIX10084505
Manufacturer Part Number: 691992001

This washer is a genuine Ryobi replacement part manufactured for use with circular, and wet saws. This special washer is often used with the depth selector knob on circular saws, the washer can have other applications. Please see model diagram for part location and use, this washer is sold individually.

LEVER

$6.51

Fix Number: FIX18695507
Manufacturer Part Number: 522691002

This is an authentic Ridgid replacement part that has been sourced from the original manufacturer to be used with circular saws. The durable plastic lever is used to turn the hex nut that secures the bevel or depth bolts. This item is used when adjusting the position of the blade depth or angle. This item is sold as an individual part.

Circular Saw Lock Nut (M5)

$6.51

Fix Number: FIX10083854
Manufacturer Part Number: 670974003

This is a genuine component which is supplied directly from the original equipment manufacturer for Ryobi and Ridgid equipment. It is a standard hardware which may have multiple applications, please make sure to refer to the appropriate diagrams of your model for the correct location and use of this hardware. Keep in mind this high-quality lock nut is made of durable metal and is sold individually.

Inner Blade Washer

$6.51

★★★★★

1 Review

Fix Number: FIX10082614
Manufacturer Part Number: 610276003

It is an authentic replacement part that is specially designed for use with Ryobi circular saws. The purpose of this washer is to help secure the saw blade to the shaft. This part is made of durable metal and it is sold individually, please note the outer flange and the blade bolt are both sold separately.

Installation Instructions

kenneth from MEDFORD, MA

lost blade clamp assbly

just followed simple diagram assbly instructions. allen wrench provided with saw. Read more...

Collet 1/4 Inch

$6.51

Fix Number: FIX16755887
Manufacturer Part Number: 690045003

This genuine component is supplied directly from the original equipment manufacturer for use with Ryobi power tools. The collet allows a user to secure a bit. Note, it is for using bits with 1/4

Ryobi Circular Saw Parts

Popular Ryobi Circular Saw Parts

Installation Instructions

Ryobi Circular Saw Appliance Types

Related Ryobi Circular Saw Parts

Popular Ryobi Circular Saw Models

Ryobi Circular Saw Parts

Start With Your Model Number

Popular Ryobi Circular Saw Parts

Installation Instructions

Ryobi Circular Saw Appliance Types

Related Ryobi Circular Saw Parts

Popular Ryobi Circular Saw Models