OEM Ridgid Chop Saw Parts & Accessories

FENCE LOCK LEVER

$11.32

Fix Number: FIX18686474
Manufacturer Part Number: 080029002098

This authentic item is supplied directly from the original equipment manufacturer for use with abrasive cut-off machines made by Ridgid. The fence lock lever attaches to the fence. This item is available as an individual replacement part. When replacing this part a wrench may be needed. It is made out of metal and will need to be replaced if it breaks.

BRUSH HOLDER

$6.25

Fix Number: FIX18686453
Manufacturer Part Number: 080029002066

It is a genuine manufacturer-sourced replacement part which is commonly used on Ridgid abrasive cut-off machines. This item holds carbon brush around the armature to provide stable and safe contact. The holder is made of high-quality plastic with metal and it is sold individually, please note the carbon brushes are sold separately.

HC SWITCH SPDT

$13.38

Fix Number: FIX18686442
Manufacturer Part Number: 080029002052

This is a genuine manufacturer-approved replacement switch which is specially designed for Ridgid saws. It is the part of the tool handling on/off operations, unfortunately, over time components will wear out and begin to fail eventually requiring a replacement. Keep in mind this high-quality plastic body switch is sold individually. Make sure to refer to the appropriate diagrams of your model for the correct location and application of this component.

BRUSH CAP

$6.25

Fix Number: FIX18686452
Manufacturer Part Number: 080029002064

It is a genuine item that is supplied directly from the original equipment manufacturer for use with Ridgid abrasive cut-off machines. This is an identical replacement for a damaged or missing brush cap that helps to secure a carbon brush in a holder. It is made of high-quality plastic and is sold individually.

FOOT

$6.25

Fix Number: FIX18687010
Manufacturer Part Number: 089029004003

Carbon Brush

$6.25

Fix Number: FIX10076898
Manufacturer Part Number: 080029002065

This is a genuine OEM replacement part which is sold individually. It is always best to replace both brushes, even if only one is worn. Brush Holder and a Brush Cap are sold separately. Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.

Groove Pin (2pk)

$12.58

Fix Number: FIX10094773
Manufacturer Part Number: 26762

This is an OEM part sourced directly from the manufacturer. The groove pin is designed for use in cut-off tools and pipe and bolt threading machines from Ridgid. This part includes two metal pins, which are used in the roll housing to secure the rollers. You may require pliers or a punch set when replacing this item.

Rolls

$49.87

Fix Number: FIX10096142
Manufacturer Part Number: 34785

Ridgid 34785 Replacement Package of 2 Rolls for the 1224 Threading Machine NPT 115V3-S Pipe Cutter (Capacity: 1" - 3")4-S Pipe Cutter (Capacity: 2" - 4")6-S Pipe Cutter (Capacity: 4" - 6").

Brush

$27.43

Fix Number: FIX10101224
Manufacturer Part Number: 74972

This carbon brush set is sourced directly from the original equipment manufacturer for use with Ridgid dry cut saws. Carbon motor brushes are one of the most commonly replaced power tool components. Over time carbon brushes will gradually wear away eventually requiring replacements. It is recommended to replace both brushes at the same time. This set includes two carbon brushes with attached lead wires and springs. Check the appropriate diagrams for your model to ensure the correct repair procedure.

WASHER 11/32X7/8X1/16

$6.25

Fix Number: FIX18701298
Manufacturer Part Number: 805553-24

This is an authentic Ridgid item, not an aftermarket imitation. It is sourced from original equipment manufacturer for use on circular saws and sanders. The purpose of a washer is to distribute the pressure evenly between two connected parts. For correct use and location of this washer please make sure to check appropriate diagrams. This part is made from durable metal and it is sold individually.

Ridgid Chop Saw Parts

Popular Ridgid Chop Saw Parts

Ridgid Chop Saw Appliance Types

Related Ridgid Chop Saw Parts

Popular Ridgid Chop Saw Models

Ridgid Chop Saw Parts

Start With Your Model Number

Popular Ridgid Chop Saw Parts

Ridgid Chop Saw Appliance Types

Related Ridgid Chop Saw Parts

Popular Ridgid Chop Saw Models