OEM Delta Chop Saw Parts & Accessories

Fibre Washer

$6.51

Fix Number: FIX10328295
Manufacturer Part Number: 904070105571S

It is a genuine item that is supplied directly from the original equipment manufacturer for use with Delta saws. This is a special component that is utilized to provide a tight seal between connected components, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. It is an identical replacement for a missing or a faulty washer that was installed on a new unit. Keep in mind it is a high-quality part which is made of durable material and is sold individually.

Anti-kick Finger

$6.51

Fix Number: FIX10323577
Manufacturer Part Number: 424040470002S

This is an authentic OEM part which is made for use with Delta radial arm saws. The device is used to prevent the material from being shot toward the user in the event of kickback. It provides a high-quality replacement for a damaged or a missing component that was installed on a new unit. Check the owner's manual and the diagrams for your model to ensure the correct repair procedure. Note, it is made of durable metal and is sold as an individual item.

Stud

$10.62

Fix Number: FIX10323416
Manufacturer Part Number: 424011110003S

Bolt

$6.51

Fix Number: FIX10327130
Manufacturer Part Number: 901010605768S

Special Bearing

$343.75

Fix Number: FIX10329716
Manufacturer Part Number: 920101514919

This is an original part assembled by the original manufacturer. It is commonly used in Delta radial arm saws. Ball bearings are used to buffer metal parts and to take wear for them. Therefore they are replaced fairly often due to metal fatigue. They also serve to secure parts to ensure proper movement direction and position. Sold individually.

Handle

$52.75

Fix Number: FIX10323648
Manufacturer Part Number: 424120670006S

PLASTIC WASHER

$6.51

Fix Number: FIX12492151
Manufacturer Part Number: 803679

This is an authentic OEM component from Porter Cable. Made for use with many band saws, the plastic washer is fitted between the bearing and the pulley shaft. This protective item is sold individually. You will need a screwdriver for the repair.

Wave Washer

$6.51

Fix Number: FIX10315980
Manufacturer Part Number: 1313118

This is a genuine Delta replacement part. The wave washer is designed by the manufacturer for use in power tools such as miter saws, lathes, cut-off machines, and drill presses. This part is made of metal, and is generally used to provide tension to a screw or bolt, to help prevent inadvertent loosening. It may be found in various locations in the machine, depending on model. Please refer to the parts diagram to be sure of ordering the correct part. You may require a screwdriver or Allen wrench when replacing this item. This part is sold individually.

Geared Tooth

$26.35

Fix Number: FIX10323447
Manufacturer Part Number: 424020510008

This is a genuine OEM sourced replacement part designed for use with Delta radial arm saws. It is an important part of the adjusting mechanism. This gear is made out of plastic and it is sold individually. To complete this repair you would need a screwdriver and a wrench set. • First you want to positions saw on its side • Punch out roll pin holding the gear on • Remove old gear • Install new gear on shaft • Secure gear with roll pin

BRUSH

$14.92

Fix Number: FIX18979810
Manufacturer Part Number: 1313113

This is a carbon brush set for your power tools, most commonly your planer jointer. Two of these brushes are needed for most power tools, and this purchase only includes one. If you are having troubles with electric braking, or motor functions, you should replace your carbon brushes. We recommend replacing both brushes together, to create an even wear. This is a part that is replaced often in power tools because of the constant friction during operation. When making this installation we recommend inspecting the armature for visible damage that could prove larger motor issues.

Installation Instructions

Dwayne from Millville, NJ

Broken belt (motor runs, blade didn't turn)

1) Watched YouTube video before ordering parts to confirm my problem and to get an overview of the repair.
2) found 7-step instruction in user manual - worked perfectly (Part# 901608 (014) downloaded PDF) on page 26
Turned saw over and layed on two 2x8s to protect spindle and it case I dropped the saw. Use a helper if you have one but I did not need one.
3) inspected motor brushes per user manual (had spares ready) 4-step instructions (two brushes) on page 25
4) used stiff brush to clean parts and screw shafts while saw was upside down
5) re-assembled, tested saw, double verified that blade tilt was still at Zero degrees when return to 0 and fense and blade were still parallel.

Cleaning and testing took as long as changing the belt and inspecting brushes. Read more...

Delta Chop Saw Parts

Popular Delta Chop Saw Parts

Installation Instructions

Delta Chop Saw Appliance Types

Popular Delta Chop Saw Models

Delta Chop Saw Parts

Start With Your Model Number

Popular Delta Chop Saw Parts

Installation Instructions

Delta Chop Saw Appliance Types

Popular Delta Chop Saw Models