OEM Porter Cable Band Saw Parts & Accessories

WHEEL

$29.57

Fix Number: FIX18981774
Manufacturer Part Number: 5140075-34

Genuine Porter Cable Wheel Tire for Band Saw. This part is made out of Rubber and is Sold Individually. When putting the tire on a band saw Wheel, it may seem too small but it is not. Band saw Tires will typically come approximately 2 or more inches smaller than the Tire you're replacing. The old Tire stretches over time thus becoming less effective and eventually will break. Also, as Tire ages the rubber hardens and allows the Blade to slip. You would need to put the New Tire in Hot/Warm Water to heat the tire enough to make it pliable enough to stretch. Its preferred to use two people in the stretching process.

INSERT, TABLE

$13.22

Fix Number: FIX18981765
Manufacturer Part Number: 5140075-24

This is a genuine Hitachi table insert. It is supplied directly from original equipment manufacturer for use on compound miter saws. Table inserts reduce splintering and jamming of thin slices of wood between the blade and the plate. If an insert is missing or damaged it needs to be replaced. This item is made out of plastic material and it is sold individually.

Watch the install video

CORD

$37.99

Fix Number: FIX12502150
Manufacturer Part Number: 879182

This cord is a genuine Porter Cable replacement part and is sold individually. It is constructed with tough, thick outer rubber insulation for a long service life. Power Cord Specifications: • 3 Prongs • 3 Wires • 18 Gauge • 7 Feet Long • Porter Cable models: 6302 T4, 6902 T5, T6

SWITCH

$34.07

★★★★★

1 Review

Fix Number: FIX18993335
Manufacturer Part Number: N224532

This Trigger switch has 4 terminals and a locking mechanism on the trigger. This authentic Porter Cable replacement part is sold individually. rnrnSwitches are commonly replaced parts in power tools, handling all on/off and variable speed operations. They also have a role in electric breaking; they can momentarily reverse electrical polarity. Because switches use mechanical internals, they will degrade and wear out over time, eventually needing replacement. Some common signs of a broken or failing switch are: • The tool has stopped functioning - it refuses to start. • The tool operates intermittently, requiring multiple tries to turn on, until eventually it won't start at all. • The variable speed function and electric braking aren't working properly.rnrn3.5" L 7/8" Depth 3/4" W

HINGE ASSEMBLY

$52.21

Fix Number: FIX18982225
Manufacturer Part Number: 5140101-03

It is a genuine item that is supplied directly from the original equipment manufacturer for use with Porter Cable band saws. This is one of the special hinges that provide support for pulleys on the unit. Over time it may wear out or get damaged eventually requiring a replacement. To ensure the exact location and the correct installation of this component, check the appropriate diagrams of your model. One durable metal hinge is included. You will need a wrench set and a screwdriver to remove the old part and secure the new one.

Watch the install video

SS/A HANDLE SET

$18.54

Fix Number: FIX12467035
Manufacturer Part Number: A03070

This is a Genuine OEM Sourced replacement part designed for use with Sanders and Band Saws. This item is made out of Plastic and it is Sold Individually. It includes Two (2) Pieces of the Knob. Please note the Screw used to secure this Knob is Sold Separately.

WASHER

$6.51

Fix Number: FIX12455448
Manufacturer Part Number: 863134

This authentic manufacturer-sourced component is specially designed for use with Black and Decker, Porter Cable and DeWALT equipment. It helps to provide a tight seal between connected parts. This part provides an identical replacement for a missing or a faulty hardware that was included with a new unit. Please make sure to check the appropriate diagrams of your model for the exact location and application of this component. Keep in mind this high-quality washer is made of durable rubber and is sold individually.

WASHER

$6.51

Fix Number: FIX12475128
Manufacturer Part Number: 803435

This is a genuine OEM sourced replacement part which is specially designed for use with portable band saws. It helps to distribute the pressure evenly and provide a tight seal between the connected parts, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality item is made of durable composite material and is sold individually.

Watch the install video

BEARING

$21.14

Fix Number: FIX12492154
Manufacturer Part Number: 803858

This needle roller style bearing is an OEM part. It is commonly found in band saws produced by Porter Cable, DeWALT, and Black & Decker. Bearings are used to diminish friction between moving parts while also securing rotational angle. They need replacing fairly often because of this high wear role. Sold separately.

TRUNNION

$12.14

★★★★★

3 Reviews

Fix Number: FIX18981724
Manufacturer Part Number: 5140074-74

This is an authentic OEM sourced part which is designed for Porter Cable band saws. It is an important part of the mechanism which mounts the table and allows a user to adjust the cutting angle. Over time it may wear out or get damaged eventually requiring a replacement to ensure your equipment functions properly. Make sure to refer to the owners manual and the appropriate diagrams of your model for the correct installation and application of this component. This high-quality trunnion is made of durable metal and is sold as an individual item. Note, the hardware to secure it is sold separately.

Porter Cable Band Saw Parts

Popular Porter Cable Band Saw Parts

Porter Cable Band Saw Appliance Types

Related Porter Cable Band Saw Parts

Popular Porter Cable Band Saw Models

Porter Cable Band Saw Parts

Start With Your Model Number

Popular Porter Cable Band Saw Parts

Porter Cable Band Saw Appliance Types

Related Porter Cable Band Saw Parts

Popular Porter Cable Band Saw Models