DeWALT Sander Polisher Bearings

Fix Number

FIX10188435

Manufacturer Part Number

N110359

This authentic ball bearing is sold individually. It can be used in a variety of differently model types, such as miter saws, circular saws, table saws, and angle grinders. This ball bearing is sealed on both sides. Its job is to minimize friction between rotating parts. The armature rotates at a very fast rate, so after years of use, it is normal for the bearings to wear.

Fix Number

FIX16680871

Manufacturer Part Number

605040-20

This Ball Bearing has metal shielding on both sides. This is a genuine Dewalt replacement part that is sold individually. • Ball bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. This reduces wear on the tool and allows it to run smoothly. • Bearings experience constant wear when the tool is in operation from pressure, heat, vibration and friction. Because of this, many Bearings need periodic maintenance or replacement.

★★★★★

★★★★★

1 Review

Fix Number

FIX10169632

Manufacturer Part Number

330003-64

This is a ball bearing for your power tools. It is used in a variety of machines for rotary motion. The bearings support your tools by lowering the friction, which allows easy rotation of moving parts. Depending on how often you use your tool the bearings are a commonly replaced part. This is because they will experience most of the pressure, heat, and vibrations.

Fix Number

FIX10180907

Manufacturer Part Number

605040-15

Genuine OEM sourced replacement part used on a variety of power tools. Ball bearings are used to reduce friction between rotating parts. Bearings experience constant wear when the tool is in operation, because of this they need to be periodically checked and replaced if needed. This part is made out of metal and it is sold individually. Included in part number 381004-00 spindle assembly.

Fix Number

FIX10171417

Manufacturer Part Number

391616-00

Fix Number

FIX11927722

Manufacturer Part Number

605040-05

This is an OEM replacement part used on on a variety of electric power tools. This is a standard ball bearing which is has multiple applications based on your tool. Bearings are designed to reduce friction between two rotating parts. Since bearings experience constant wear from pressure, heat and friction, eventually they would need to be replaced. This is sealed metal bearing and it is sold individually.

Fix Number

FIX10169630

Manufacturer Part Number

330003-60

This is a bearing, and it is used in various power tools. It is meant to reduce tension between the moving parts within the tool. This bearing has a 1 inch outer diameter, less than 1/4-inch inner diameter, and green walls.

Fix Number

FIX12475150

Manufacturer Part Number

804211

This is a genuine replacement steel bearing from original manufacturer. It is commonly used in Porter Cable and Black & Decker belt sanders. Bearings are parts which separate metal parts to ease in movement and reduce friction. They also stabilize and prevent incorrect direction/tilt during movement. These high-wear parts are replaced regularly. This part is sold individually. Washers etc. sold separately.

Fix Number

FIX16680866

Manufacturer Part Number

605040-06

This is replacement ball bearing is a commonly used item on a variety of power tools. Bearings are specially designed to allow connected parts to rotate smoothly. The way it is build it will minimize friction between the rotating parts. This is a sealed metal bearing generally used with an armature. Includes one (1) bearing per order. Steps to replace this bearing would be different from one model to another. However, general steps to complete this repair would be the same. You may need a screwdriver and pliers to finish this job. • Make sure the unit is unplugged • Remove the cover/housing • Disengage the brushes • Remove the armature • Remove the old bearing • Install the new bearing • Reassemble unit and test the equipment

Fix Number

FIX12499559

Manufacturer Part Number

859293

This is a needle bearing that is open on both sides. This genuine Porter Cable replacement part is sold individually. • Ball bearings minimize friction between rotating parts in your tool. The balls or rollers bear the load and spin, distributing the weight evenly, while the minimal contact area of the balls reduces friction. This reduces wear on the tool, allowing it to run smoothly. • Bearings experience constant wear when the tool is in operation from pressure, heat, vibration and friction. Because of this, many Bearings need periodic maintenance or replacement.