Sander Polisher Bearings

★★★★★

★★★★★

2 Reviews

Fix Number

FIX10075791

Manufacturer Part Number

030157001018

This sander pad is compatible with the Ryobi random orbit sander listed below. It is genuine Ryobi replacement part. The pad features a durable foam body attached to a hard plastic backing plate. It is a five inch diameter pad with a hook-and-loop style underside for use with Hook and Loop type sandpaper. This pad has eight vacuum holes. Hook and Loop sandpaper has become very popular over the past few years, because of the ease of changing sandpaper grits when needed.

Fix Number

FIX10188435

Manufacturer Part Number

N110359

This authentic ball bearing is sold individually. It can be used in a variety of differently model types, such as miter saws, circular saws, table saws, and angle grinders. This ball bearing is sealed on both sides. Its job is to minimize friction between rotating parts. The armature rotates at a very fast rate, so after years of use, it is normal for the bearings to wear.

Fix Number

FIX10463886

Manufacturer Part Number

BB-6202ZZ

This is an authentic OEM replacement part for certain models of Jet, Powermatic, and Wilton tools that is sourced from the manufacturer. To ensure that this will fit your tool, please see the "Model Cross Reference List" below. This part has an outer diameter of 1.5", and metal shielding on both sides. The bearing is used to reduce friction between two rotating parts. It keeps wear on the equipment to a minimum, and helps the mechanics run efficiently. Depending on how often you use your tool, your bearings will need routine replacement due to continual pressure on them. Signs of broken or failing Ball Bearings include squealing, screeching, or grinding noise when powering the device off. Each is sold individually.

Fix Number

FIX10169630

Manufacturer Part Number

330003-60

This is a bearing, and it is used in various power tools. It is meant to reduce tension between the moving parts within the tool. This bearing has a 1 inch outer diameter, less than 1/4-inch inner diameter, and green walls.

★★★★★

★★★★★

1 Review

Fix Number

FIX10169632

Manufacturer Part Number

330003-64

This is a ball bearing for your power tools. It is used in a variety of machines for rotary motion. The bearings support your tools by lowering the friction, which allows easy rotation of moving parts. Depending on how often you use your tool the bearings are a commonly replaced part. This is because they will experience most of the pressure, heat, and vibrations.

Fix Number

FIX10116895

Manufacturer Part Number

02-04-1229

This authentic replacement part is designed for use with Milwaukee drills/drivers. Ball bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. Bearings experience constant wear from pressure, heat, vibration and friction. Because of this, many bearings need to be periodically replaced. This part is made out of metal and it is sold individually.

Fix Number

FIX16658854

Manufacturer Part Number

210211-1

This authentic replacement ball bearing is designed for use with Makita belt sander. Bearings are a commonly replaced item used to reduce friction between rotating parts. The way it is designed the weight will be distributed evenly while the minimal contact area of the ball reduces friction. This particular bearing is used on both sides of the sleeve allowing angle stay and arm to move freely. Over time they will wear out requiring replacement. Please note this part is made out of metal and it is sold individually. This is a sealed bearing.

Fix Number

FIX10315390

Manufacturer Part Number

1086894S

This ball bearing fits a variety of lawn and gardening tools. The ball bearings prevent friction between rotating parts. The balls do this by bearing the load and spin and distributing the weight equally, while the minimal contact area of the balls reduce friction. This allows your tool to run easily. Ball bearings are a commonly replaced part because of the constant wear they experience. Tip: check your bearings and replace them periodically. *Please note: they are sold individually.

Fix Number

FIX10141535

Manufacturer Part Number

211066-7

This is a Ball Bearing that is sealed on both sides. This is a genuine Makita replacement part that is sold individually. rnrn • Ball bearings minimize friction between 2 parts in your tool that would otherwise spin and rub against each other. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the balls reduce friction. This reduces wear on the tool and allows it to run smoothly. rn • Bearings experience constant wear when the tool is in operation from pressure, heat, vibration and friction. Because of this, many Bearings need periodic maintenance or replacement.

Fix Number

FIX10116846

Manufacturer Part Number

02-04-0845

This is a Genuine OEM Approved replacement part used on a variety of Milwaukee Power Tools. This Ball Bearing has multiple applications based on your tool. Ball Bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. This reduces wear on the tool and allows it to run smoothly. Bearings experience constant wear when the tool is in operation from pressure, heat, vibration and friction. Because of this, many Bearings need periodic maintenance or replacement. This part is made out of Metal and it is Sold Individually. To replace this Bearing you would need a Screwdriver and Pliers.