OEM Milwaukee Sander Polisher Parts & Accessories

Ring Retaining 0.8mm Thk

$6.51

Fix Number: FIX10131977
Manufacturer Part Number: 44-86-1380

This is an authentic OEM part which is designed for use with Milwaukee tools. It is a special hardware which helps to secure components. This is an identical replacement for a damaged or a faulty part that was installed on a new unit. Check the appropriate diagrams for your model for the exact location and the correct installation of this retaining ring. You will need snap-ring pliers to remove the old part and secure the new one. One durable metal retaining ring is included.

Brush Holder Assembly

$7.16

Fix Number: FIX10122400
Manufacturer Part Number: 22-22-1325

This is an authentic manufacturer sourced replacement assembly designed for use with Milwaukee power tools. This part holds carbon brush around the armature to provide stable and safe contact. It is made out of plastic with metal and it is sold individually. Please note carbon brushes are sold separately. To replace this assembly you would need a screwdriver and pliers. • First remove screws holding the cover together • Carefully remove two halves of the housing to gain access to armature and brush holder • Remove the screws holding brush holder to the trigger • Remove the armature assembly and the brush holder • Install the new brush holder, brushes and the armature • Reassemble and test your tool

Carbon Brush

$8.51

Fix Number: FIX10122198
Manufacturer Part Number: 22-18-0710

This carbon brush lead or also known as a carbon motor brush fits the following tools: angle grinders, nibbler and shears, sander polishers, and jig saws. This includes the brush and a wire lead attached. This is one of the most commonly replaced power tool components because the carbon brushes easily wear off with friction and use. If your brush is worn out it can cause intermittent motor function, reduction in electric braking, and in motor power. If you notice burns and cracks on the wire lead, then it is best to replace this part. Tip: when replacing your carbon brush, make sure to inspect your armature for damage as well, in case there are larger motor problems.

Carbon Brush

$17.93

Fix Number: FIX10122149
Manufacturer Part Number: 22-18-0126

This is an authentic Milwaukee replacement part. The rubber feet on the bottom of your chop saw not only keep the machine stable, they help keep the machine in one place during operation, and they help minimize the vibration. These rubber feet help keep things running safely and efficiently. This part is made out of rubber, over time they will break down and need to be replaced. Each foot is sold individually. Installation is simple and requires no special tools. Before repairing or replacing any part on your chop saw make sure it is unplugged.

Cord Set

$18.30

Fix Number: FIX10122674
Manufacturer Part Number: 22-64-0215

This is a cord set for your power tools. It is constructed with a tough outer-rubber insulation for a longer life span. The 18-gauge power cord is 8 feet long, and comes with 2 prongs and 2 wires. This cord is black in color and is sold individually.

Ball Bearing

$11.14

Fix Number: FIX10116846
Manufacturer Part Number: 02-04-0845

This is a Genuine OEM Approved replacement part used on a variety of Milwaukee Power Tools. This Ball Bearing has multiple applications based on your tool. Ball Bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. This reduces wear on the tool and allows it to run smoothly. Bearings experience constant wear when the tool is in operation from pressure, heat, vibration and friction. Because of this, many Bearings need periodic maintenance or replacement. This part is made out of Metal and it is Sold Individually. To replace this Bearing you would need a Screwdriver and Pliers.

Ball Bearing

$7.37

Fix Number: FIX10116859
Manufacturer Part Number: 02-04-0910

This is an authentic part produced by the original manufacturer. It is compatible with Milwaukee power tools including grinders, sanders, and polishers. Ball bearings secure moving parts, allowing for free movement while reducing friction. They are high wear parts that may need regular replacement for optimal performance from tools. Sold individually.

Carbon Brush Assembly

$6.51

Fix Number: FIX10122192
Manufacturer Part Number: 22-18-0680

This carbon brush is used on a variety of cordless tools and tools. *Please note: This part is sold individually. Carbon brushes are commonly replaced because they wear out easily with friction. If your brush is worn out it can cause disruption in the functioning of the motor and reduce electric braking. If you notice cracks, burns and other damage on wire lead, then it is best to replace it to restore the motor and its functions. Refer to the manual provided by the manufacturer for further installation instructions.

Ball Bearing

$9.81

Fix Number: FIX10116895
Manufacturer Part Number: 02-04-1229

This authentic replacement part is designed for use with Milwaukee drills/drivers. Ball bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. Bearings experience constant wear from pressure, heat, vibration and friction. Because of this, many bearings need to be periodically replaced. This part is made out of metal and it is sold individually.

Hook And Loop Sander Pad

$10.88

★★★★★

1 Review

Fix Number: FIX11878741
Manufacturer Part Number: 51-36-7100

This is a genuinely sourced hook and loop sander pad for your sander. It is intended for 5-inch discs, and has 8 dust collection holes, which work alongside the dust bag to contain debris. Be careful not to apply too much tension on the sander as this can lead to early wear on the hook and loop sander pad. When replacing a pad, remove the four screws that secure the pad to the sander and replace it with your new pad.

Milwaukee Sander Polisher Parts

Popular Milwaukee Sander Polisher Parts

Milwaukee Sander Polisher Appliance Types

Related Milwaukee Sander Polisher Parts

Popular Milwaukee Sander Polisher Models

Milwaukee Sander Polisher Parts

Start With Your Model Number

Popular Milwaukee Sander Polisher Parts

Milwaukee Sander Polisher Appliance Types

Related Milwaukee Sander Polisher Parts

Popular Milwaukee Sander Polisher Models