OEM Milwaukee Orbital or Palm Sander Parts & Accessories

Ring Retaining 0.8mm Thk

$6.51

Fix Number: FIX10131977
Manufacturer Part Number: 44-86-1380

This is an authentic OEM part which is designed for use with Milwaukee tools. It is a special hardware which helps to secure components. This is an identical replacement for a damaged or a faulty part that was installed on a new unit. Check the appropriate diagrams for your model for the exact location and the correct installation of this retaining ring. You will need snap-ring pliers to remove the old part and secure the new one. One durable metal retaining ring is included.

Aluminum Plate Assy

$8.02

Fix Number: FIX17082202
Manufacturer Part Number: 44-66-0475

Sanding Pad Service Kit

$10.95

★★★★★

1 Review

Fix Number: FIX10121188
Manufacturer Part Number: 14-67-0275

This is an authentic Makita replacement part that has been sourced from the original manufacturer to be used with 1/4 sheet palm sanders. The sanding pad attaches to the base of the sander and, is used to provide a flat even surface to support the sandpaper. This item is available as an individual replacement part.

Brush Spring

$6.51

Fix Number: FIX10123380
Manufacturer Part Number: 23-52-0240

This is a brush spring for your power tools. It keeps the brush tight against the armature. Over time the carbon brush will wear down, and heat will be created. This could cause your spring to lose tension, and will then have to be replaced. For this part to be in great working condition, it needs tension to keep the brush tight. When you replace your carbon brushes we recommend replacing your brush spring for an even wear, and to keep the spring in perfect working condition. This part is made from metal and is sold individually.

Base Plate Assy

$26.35

Fix Number: FIX17076879
Manufacturer Part Number: 31-06-0135

Brake

$6.51

★★★★★

2 Reviews

Fix Number: FIX11878277
Manufacturer Part Number: 44-52-0970

This is a genuine manufacturer-sourced replacement part which is designed for Milwaukee random orbit sanders. It is a special brake which helps to support the sander pad. If the part is worn or damaged, this will provide an identical replacement for the original component that was installed on a new unit. Refer to the appropriate diagrams for your model to ensure the exact location and the correct repair procedure. This high-quality brake is made of durable material and is sold as an individual item. Note, the hardware to secure it is sold separately.

Dust Box Assembly

$15.35

Fix Number: FIX11877486
Manufacturer Part Number: 31-15-0640

This is a genuine OEM part. The Milwaukee dust box assembly is made for use with the 6034-21 5" Random Orbit Sander. This plastic component is fastened onto the Vac adapter, capturing dust and debris from the sander. The dust box assembly is sold individually. No tools should be necessary for the installation.

Bearing Assembly

$14.34

Fix Number: FIX11876484
Manufacturer Part Number: 02-04-0043

This authentic OEM sourced replacement part is specially designed for use with Milwaukee random orbit sanders. Bearings are generally utilized to reduce the friction between rotating parts. They help to distribute the weight while the minimal contact area of the bearing friction. To ensure the correct repair procedure check the appropriate diagrams for your model. This part is made from high-quality metal and is sold individually. A wrench set might be needed when replacing this hardware.

Hook And Loop Sander Pad

$10.88

★★★★★

1 Review

Fix Number: FIX11878741
Manufacturer Part Number: 51-36-7100

This is a genuinely sourced hook and loop sander pad for your sander. It is intended for 5-inch discs, and has 8 dust collection holes, which work alongside the dust bag to contain debris. Be careful not to apply too much tension on the sander as this can lead to early wear on the hook and loop sander pad. When replacing a pad, remove the four screws that secure the pad to the sander and replace it with your new pad.

Pad Brake

$7.65

Fix Number: FIX10131172
Manufacturer Part Number: 44-52-0965

This is a genuine Milwaukee replacement part, It is sold individually. This part controls the random orbit functions of of the Milwaukee sander it is used on. If this part breaks or gets worn, the sander will operate poorly and the pad will rotate at a high rate of speed.

Milwaukee Orbital or Palm Sander Parts

Popular Milwaukee Orbital or Palm Sander Parts

Milwaukee Orbital or Palm Sander Appliance Types

Popular Milwaukee Orbital or Palm Sander Models

Milwaukee Orbital or Palm Sander Parts

Start With Your Model Number

Popular Milwaukee Orbital or Palm Sander Parts

Milwaukee Orbital or Palm Sander Appliance Types

Popular Milwaukee Orbital or Palm Sander Models