OEM Craftsman Belt or Drum Sander Parts & Accessories

Belt

$10.73

Fix Number: FIX10180446
Manufacturer Part Number: 587263-00

This is a genuine OEM sourced replacement belt used on Bosch sanders. This is the main drive belt for the unit. This item is made out of rubber and it is sold individually. It is recommended to replace these belts every 6 months to ensure optimum performance. You would need a screwdriver to complete a repair. • Remove the belt cover • Replace the old belt with the new one • Secure the housing

Carrier Assembly

$20.02

Fix Number: FIX12482192
Manufacturer Part Number: 589384-00N

This is a genuine Black and Decker part that has been OEM sourced to ensure quality. The carrier assembly is intended to be used with belt sanders. The carrier attaches to the cover plate and the mounting plate. This item is used as the front roller to allow the belt to rotate. This part also includes the lever used to move the carrier to tighten and loosen the belt when changing sanding belts. This assembly is priced as a single item.

Drive Roller

$9.58

Fix Number: FIX10185528
Manufacturer Part Number: 90514806

This is a genuine OEM sourced part used on several belt sanders. The DeWalt drive roller is designed to rotate the sanding belt. This durable plastic item is sold individually. A screwdriver and pliers will be needed to perform this repair.

Bearing

$6.51

Fix Number: FIX11928766
Manufacturer Part Number: 90566481

This replacement bearing is an authentic component which is supplied directly from the original equipment manufacturer for use with Black and Decker and Dewalt sanders and angle grinders. Bearings are used to reduce friction between rotating parts, please make sure to check appropriate diagrams of your unit for the correct location and use of this hardware. Over time bearings tend to wear out and may begin to fail eventually requiring replacement to maintain peak performance. This part is made of high-quality metal and it is sold individually.

Spring

$6.51

Fix Number: FIX10082877
Manufacturer Part Number: 616247001

This is an authentic Craftsman replacement part that is sourced from the original manufacturer to be used with disc or belt sanders. The metal spring is used to provide compression for the spindle lock pin when changing the sanding pads of disc sanders. The spring is used in a similar application on belt sanders. This item is available as an individual replacement part.

Dust Bag Assembly

$20.06

Fix Number: FIX10180509
Manufacturer Part Number: 588562-00

This dust bag assembly is a genuine OEM replacement part, it is not an aftermarket imitation. This high quality item is made for use with Dewalt and Black and Decker sanders. The purpose of this bag is to collect the dust picked up by sander. It is made with strong fabric material with a plastic collar. It has a zipper for quick and easy clean up. Please note, one dust bag assembly is included per order. No tools needed to replace this part.

Drive Roller

$18.51

Fix Number: FIX10185595
Manufacturer Part Number: 90545358

This is a genuine manufacturer-approved component which is designed for DeWalt and Black and Decker sanders. It is a high-quality replacement for a missing or a damaged drive roller that was installed on a new unit. The part is an important component of the mechanism that rotates the sanding belt. Refer to the appropriate diagram for your model to ensure the correct repair procedure. Note, this high-quality drive roller is made of a durable material and is sold individually. A screwdriver and pliers will be needed to perform this repair.

Vacuum Adaptor

$6.51

Fix Number: FIX10180487
Manufacturer Part Number: 587843-00

This is an authentic Black and Decker replacement part manufactured for use with belt sanders. The plastic vacuum adapter attaches to the discharge port and allows the user to connect a vacuum to reduce the amount of dust created by the sander. This vacuum adapter is sold individually.

Brush Assembly

$8.54

Fix Number: FIX10180510
Manufacturer Part Number: 588563-00

An authentic OEM supplied replacement carbon brush assembly that is designed for use with Dewalt and Black and Decker sanders. Carbon brushes are used to conduct electric current by maintaining physical contact with an armature. Over time they will wear away eventually requiring replacement. It includes one carbon brush with lead wire attached and one brush holder with a spring. It is recommended to replace both brushes at the same time.

Bearing Ball 626z Od19xid6x6

$6.51

Fix Number: FIX12123518
Manufacturer Part Number: 681761001

This genuine OEM sourced replacement ball bearing is a standard item which has multiple uses on a variety of power tools. Please check diagrams for proper application of this item. The bearing is specially designed to reduce friction between rotating parts. Over time it will wear out, at this point it should be replaced. This is a sealed metal bearing and it is sold individually.

Craftsman Belt or Drum Sander Parts

Popular Craftsman Belt or Drum Sander Parts

Craftsman Belt or Drum Sander Appliance Types

Popular Craftsman Belt or Drum Sander Models

Craftsman Belt or Drum Sander Parts

Start With Your Model Number

Popular Craftsman Belt or Drum Sander Parts

Craftsman Belt or Drum Sander Appliance Types

Popular Craftsman Belt or Drum Sander Models