OEM Ryobi Angle Grinder Parts & Accessories

Frothing Tube

$6.25

Fix Number: FIX17017011
Manufacturer Part Number: 162417000000

This authentic frothing tube is sourced directly from the original manufacturer and is designed for use with the milk reservoir of espresso machines. Controlled by the frothing tube lever (sold separately), it plays a key role in dispensing frothed milk. Keeping the frothing tube clean is essential—if it becomes blocked, milk flow will be restricted or stopped entirely. This high-quality part is sold individually and should be installed according to your model’s specifications.

Auxiliary Handle

$6.25

Fix Number: FIX11855013
Manufacturer Part Number: 039028007054

This is an authentic Ryobi replacement part manufactured for use with angle grinders. The handle is threaded on one end to screw directly into the side of the angle grinder, to allow for a better grip while operating the grinder. The auxiliary handle is sold individually.

Wheel Guard

$7.82

Fix Number: FIX11855007
Manufacturer Part Number: 039028007003

This genuine OEM sourced replacement guard which is utilized on Ryobi angle grinders. It is secured over the grinding disk to direct dust and trimmings away from the user as well as provide protection while the unit is in operation. Never operate a grinder without a wheel guard. This part is made of durable metal and it is sold individually. Screw is not included. Part number 039028001004 is for the screw.

Brush Cap

$6.25

Fix Number: FIX11855011
Manufacturer Part Number: 039028007036

Genuine Ryobi replacement part, this item is sold individually. The purpose of the Brush Cap, is to secure the brushes and keep the brush tight against the armature in the housings of the tool models shown below.

Wrench

$6.25

Fix Number: FIX11855012
Manufacturer Part Number: 039028007053

Genuine Ryobi replacement part, this item is sold individually. This Spanner Wrench is used to remove and tighten the 039028001001 Clamp Nut which holds the grinding wheel on the tools listed below. While pressing the spindle lock on top on the gearcase, the it is placed in two of the holes of the Clamp Nut to loosen of tighten the nut.

Bottom Flange (3/8 Inch Arbor

$6.25

Fix Number: FIX16671991
Manufacturer Part Number: 614646001

Clamp Nut

$6.25

Fix Number: FIX11855006
Manufacturer Part Number: 039028007001

Genuine Ryobi replacement part, this item is sold individually. The purpose of this Clamp Nut is to secure the Grinding wheel to the spindle of the Grinders shown below. To tighten the nut to the spindle, you will need to depress the spindle lock assembly on top of the gear case. Then use the part number 039028001052 Spanner Wrench to loosen and then tighten the nut back on.

Wheel - No.60, 150 X 20 X 12.7

$14.48

Fix Number: FIX12090536
Manufacturer Part Number: 089150100050

This part is an OEM sourced directly from the manufacturer for use in Ryobi bench grinders. The wheel connects to the wheel flange and the wheel cover. It might require a screwdriver to replace this part if it becomes broken. This item is available as an individual replacement and is made of hard material.

Carbon Brush

$6.25

Fix Number: FIX11855010
Manufacturer Part Number: 039028007035

This is a genuine Ryobi replacement part, and is sold individually. Worn brushes are often the cause of a poorly running motor • Replacing brushes can fix an intermittent motor • New brushes can restore a motor's electric braking Carbon motor brushes are one of the most commonly replaced power tool components. Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power. A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.

Clamp Nut

$6.25

Fix Number: FIX11854951
Manufacturer Part Number: 019498008001

Ryobi Angle Grinder Parts

Popular Ryobi Angle Grinder Parts

Ryobi Angle Grinder Appliance Types

Related Ryobi Angle Grinder Parts

Popular Ryobi Angle Grinder Models

Ryobi Angle Grinder Parts

Start With Your Model Number

Popular Ryobi Angle Grinder Parts

Ryobi Angle Grinder Appliance Types

Related Ryobi Angle Grinder Parts

Popular Ryobi Angle Grinder Models