OEM Dotco Angle Grinder Parts & Accessories

Lever

$50.22

Fix Number: FIX10334936
Manufacturer Part Number: 01-1267

It is a genuine manufacturer-sourced part which is designed for use with Dotco power tools. The lever allows a user to lock the tool in ON position for ease of operation. This is an identical replacement for a missing or a faulty lever that was installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality part is made of durable metal and is sold individually.

1/4\\\\\\\\\\\\\\\ Collet

$64.17

Fix Number: FIX10335906
Manufacturer Part Number: 308PT

This is an authentic replacement collet which is supplied directly from the original equipment manufacturer for use with Cleco and Dotco. This part allows a user to secure a router bit, keep in mind it is for use with 1/4" arbors only. It is made of high-quality metal and is sold individually, please note the collet nut is sold separately.

Wrench (3/16

$21.82

Fix Number: FIX12145309
Manufacturer Part Number: 208862PT

This is a genuine OEM sourced replacement 3/16" wrench, it is specially produced for use with Dotco grinders. This component allows a user to secure or remove a collet nut, angular profile of this item makes tightening and loosening extremely easy. It is made of durable metal and it is sold individually.

Intake Hose

$78.00

Fix Number: FIX10335977
Manufacturer Part Number: 45-0948

It is an authentic manufacturer-sourced part which is specially designed for Dotco pneumatic grinders. The intake hose supplies air that powers the tool. Over time the material may wear out and begin to crack eventually requiring a replacement. Note, this high-quality part is made of durable rubber with two metal fittings and is sold as an individual component. To ensure the proper replacement procedure, refer to the owner's manual and the appropriate diagrams for your specific model.

Rotor Blade

$19.76

Fix Number: FIX17016576
Manufacturer Part Number: 1343

This is a genuine rotor blade that is specially produced for Dotco grinders. It is supplied directly from original equipment manufacturer. It fits in the rotor helping to push the air inside the tool. Depending on your equipment you may need more than one (1) of these blades. A chipped or otherwise damaged blade should not be used and needs to be replaced with a new blade. This blade is made out of compound materials and is sold individually.

Filter Disc

$9.78

Fix Number: FIX10335963
Manufacturer Part Number: 4293

This is an authentic OEM part for use in grinders, buffers, and sanders made by Dotco and Cleco. The filter disc goes between the motor housing and the filter retainer. During the installation process, a set of pliers might be needed to replace this item. It is made of a felt material and will need to be replaced if it becomes ripped or dirty. Keep in mind this high-quality part is sold individually.

Rotor Blade (sold Individually

$16.32

Fix Number: FIX10302489
Manufacturer Part Number: 1008914

This part is sourced directly from Dotco and is designed to work with various Dotco and Cleco Drills, Grinders, and Power Motors. For full compatibility, please see the "Model Cross Reference List" below. The Rotor Blade is responsible for producing airflow inside the cylinder. If your tool has less power than before, it may be a sign that you have damaged Rotor Blades. If your Rotor Blades are cracked, chipped, or damaged, your tool will not operate properly, and they need to be replaced. Each blade is approximately 1" long, and are sold individually.

Grinder Grinder/Sander Rotor Blade

$15.10

Fix Number: FIX12145308
Manufacturer Part Number: 1906PT

This part is sourced directly from Dotco and is designed to work with various Dotco and Cleco Grinders and Sanders. For full compatibility, please see the "Model Cross Reference List" below. The Rotor Blade is responsible for producing airflow inside the cylinder. If your tool has less power than before, it may be a sign that you have damaged Rotor Blades. If your Rotor Blades are cracked, chipped, or damaged, your tool will not operate properly, and they need to be replaced. Each blade is approximately 1" long, and are sold individually.

Gear Lube

$22.06

Fix Number: FIX10335980
Manufacturer Part Number: 45-0980

This is a genuine manufacturer-approved gear lube that is specially produced for use with Cleco and Dotco sanders and grinders. It helps to lubricate the system allowing for easy movement and protecting the parts from the usual wear. Keep in mind this high-quality 2 oz. tube is sold individually. Please make sure to refer to the owners manual of your tool for the correct application.

Rotor Blade

$17.72

Fix Number: FIX10303495
Manufacturer Part Number: 2253PT

This authentic manufacturer approved replacement rotor blade is designed for use with Cleco and Dotco power tools. It fits in the rotor helping to push the air inside the tool. Depending on your equipment you may need more than one (1) of these blades. This part is made out of composite material and it is sold individually.

Dotco Angle Grinder Parts

Popular Dotco Angle Grinder Parts

Dotco Angle Grinder Appliance Types

Related Dotco Angle Grinder Parts

Popular Dotco Angle Grinder Models

Dotco Angle Grinder Parts

Start With Your Model Number

Popular Dotco Angle Grinder Parts

Dotco Angle Grinder Appliance Types

Related Dotco Angle Grinder Parts

Popular Dotco Angle Grinder Models