DeWALT Router Brushes

Fix Number

FIX12517203

Manufacturer Part Number

N031634

Genuine Porter Cable replacement part Includes 1 Carbon Brush with wire lead attached. • Worn brushes are often the cause of a poorly running motor • Replacing brushes can fix an intermittent motor • New brushes can restore a motor's electric braking Carbon motor brushes are one of the most commonly replaced power tool components. • Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. • Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power. • A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. • When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.

Fix Number

FIX10172059

Manufacturer Part Number

398139-01

This is a single carbon brush with lead and rubber sheath attached. If your motor is running poorly, intermittently, or the electric braking has failed, these are all signs of worn brushes. For this repair, you will need to remove the motor cap, pull the brush springs away from the brush, and pull the brushes away from the commutator. Use a pair of needle nose pliers to disconnect the wire lead connector from the holder.

Fix Number

FIX10186732

Manufacturer Part Number

A27343

This carbon brush is sourced from the original manufacturer and is used with compact routers. This part includes one carbon brush with the wire lead attached. The carbon brush is a general wear part that will require replacing from time to time, especially if the motor is malfunctioning. Inspect the carbon brush regularly for burns or cracks. If smoke or burn marks are present, we highly suggest inspecting the armature as well.

Fix Number

FIX12508375

Manufacturer Part Number

N030459

This is a Genuine Manufacturer Sourced replacement part used on certain Routers. This item includes One (1) Carbon Brush with Lead Wire Attached and One (1) Spring. Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.

Fix Number

FIX10172207

Manufacturer Part Number

400814-00

Genuine Dewalt/Black & Decker replacement part. includes 1 Carbon Brush with wire lead and brush spring attached. 2 Brushes are needed for the tools listed below. • Worn brushes are often the cause of a poorly running motor • Replacing brushes can fix an intermittent motor • New brushes can restore a motor's electric braking Carbon motor brushes are one of the most commonly replaced power tool components. Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power. A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.

Fix Number

FIX10185937

Manufacturer Part Number

940146-01

This replacement brush is an authentic high quality item that is specially manufactured for use with Dewalt and Black and Decker routers. Carbon brushes play an important role by conducting electric current by having direct contact with an armature. Over time brushes will wear away eventually requiring replacement. One carbon brush with a lead wire and a spring attached is included per order, please note the brush holder is sold separately. It is recommended to replace both brushes at the same time.

Fix Number

FIX10186733

Manufacturer Part Number

A27345

It is a genuine OEM supplied replacement brush holder assembly that is specially designed for use with Porter Cable and Dewalt routers. The purpose of a carbon brush is to conduct electric current by maintaining physical contact with an armature. Please note one durable carbon brush and a metal holder with a spring and a lead wire are included per order. It is recommended to replace both brushes at the same time.

Fix Number

FIX10179943

Manufacturer Part Number

580017-01

Carbon brushes play key role in power tools by conducting electric current by maintaining constant contact with the armature. This is a genuine OEM sourced replacement part that is specially designed for Dewalt plunge routers. One durable carbon brush with a lead wire is included per order, it is advised to replace both brushes at the same time.

Fix Number

FIX10184380

Manufacturer Part Number

761202-00

This brush holder is an OEM direct from DeWalt. The metal and plastic holder is made for use with several router devices, and is sold individually. This component is an identical replacement, and is designed to secure the carbon brush to ensure conductivity with an armature. A screwdriver and pliers are often needed for the removal and installation.

Fix Number

FIX17062019

Manufacturer Part Number

NA089137